Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, how to connect to the wireless router is not plugged in, how to connect to the wireless router many people do not know, now let's take a look!

At present, the use of local area network is more and more. At this point, one router does not have enough ports and needs to reconnect to another router. So, how can two routers be used at the same time? Next, the editor will show you how to connect two wireless routers for your nightlife reference.

First, use the network to expand destinations:

To get a router, you must first look at the basic structure of the wireless router. Generally speaking, the blue color at the interface of the wireless router is the wlan interface, which is used to connect the network cable. Another is connected to a laptop or desktop or other device connected to the network. We also need to check the ip address, username and password of the wireless router. Generally speaking, these addresses and user names and passwords are written on the bottom sign. All you have to do is turn over the sign on the bottom step and you can see it. The ip addresses of different routers are different from those other things, so be sure to take a good look at them. Then enter the wireless routing address in our browser, pop up the login interface, enter the user and password, and then make a full configuration. The name of the router connected to ADSL or broadband will appear in the configuration, and there will be another router, that is, the other router to which we are going to connect. You only need to distribute the network equally between the two routers so that all routers in the ip address range can access the Internet.

Second, connect to the router using the general method:

We can also connect two routers in the usual way, that is, the router and interface of one of our computers. After entering the router configuration password and default settings, you can obtain the submask from the network service provider. Once one router is set up, the submask and ip address of the other router can be entered into the other router so that both routers can access the Internet at the same time.

Matters needing attention for the connection between the two routers:

To realize the connection between two routers, you need to pay attention to the following points. Because there are many ports in the router, the circuit is very complex. Be careful when connecting, but it will not cause confusion in the local area network and inability to access the Internet.

How do I set up the second router?

Method 1: connection between router and computer

1. First of all, the first router is the main router, which needs to perform the following functions: connect to the external network and assign IP to other computers. So the WAN port of the first router (the blue or black interface at the back of the router, marked with WAN text) is plugged into the network cable pulled in from the outside. Open the DHCP service at the same time.

two。 Second, the second router plugs the network cable into any socket on the back of the router (that is, the LAN port, usually yellow, labeled with the number 1234), rather than the separate black WAN port. At the same time, the DHCP network needs to be closed.

3. In addition, the other nth router refers to the settings and connection method of the second router, and can connect to the second LAN or the LAN port of the first router or other router. It is important to note that all routers are concatenated through LAN ports except that the WAN port of the first router is plugged into an external network cable.

4. Finally, the computer is also plugged into any yellow LAN port of the router, which can be plugged into the LAN port of any router without any setting, that is, directly in series.

Method 2: configure the second router.

1. In fact, the second one can be set up similar to the first one. That is, the first set is set in the normal way, and then the second set is also set in the normal way. The default DHCP setting (on).

two。 Then, on the second workstation, set the Internet access mode of the WAN port of the external network to dynamic IP:

3. Then, the connection method is to cable one of the LAN ports of the first router and the WAN port of the second router:

The characteristics of this method are as follows: 1. When wired, all bridge routers (including the first one) are connected through LAN ports; 2. Among them, the DHCP of the first (with access to the external network) should be turned on, and the other routers should turn off DHCP. 3. If a router starts DHCP, it will affect other routers to access the Internet; if there is a problem with the first computer, it is easy for other computers to obtain IP. At the same time, if the computer wants to enter other routers, it must first set up the computer's fixed IP, and the background IP of other computers has the same network segment and gateway. Anyway, maintenance is troublesome.

There are two characteristics of this method: 1. The second station sets the WAN connection mode to "dynamic IP" ("dynamic acquisition") in the external network setting; 2. The WAN port of the second workstation can be connected to the LAN port of the first workstation. The problem of any one station will not affect the other stations, unless the first station cannot access the external network. The computer can connect the network cable directly, connect the router that needs to be maintained, and obtain the IP automatically. In short, maintenance is simple.

There is also a way to connect two routers, which is introduced here. Through the introduction of Bian Xiao above, I think you may already know how to connect two routers in the LAN and achieve Internet access, so that you can supply more devices. I hope the above introduction of Xiao can give you some help.

The above is about how to connect two wireless routers. I hope I can help you!

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.