Shulou(Shulou.com)06/01 Report--

Reinstall system boot appears blue screen code 0X000000a5 solution is how, many novices are not very clear about this, in order to help you solve this problem, the following editor will explain in detail for you, people with this need can come to learn, I hope you can gain something.

Installed is the windows XP2 system reinstalling the system, the computer can not enter the system, as soon as it enters the system, the blue screen code 0X000000A5 (0X00000002 Magi 0X81A53008recovery0XE13291A0Power0X81A4C770), when the boot blue screen appears the following blue screen code 0X000000a5 how to do?

Blue screen code 0X000000a5 reason:

◆ error analysis: usually because the motherboard BIOS can not fully support the ACPI specification.

◆ graphics card is loose or gold finger is oxidized.

◇ blue screen code 0X000000a5 solution:

If there is no corresponding BIOS upgrade, press F7 when you install Windows 2K/XP, when prompted by "press F6 if you need to install a third-party SCSI or RAID driver", so that Windows automatically forbids the installation of ACPI HAL and installs Standard PC HAL. If the blue screen code 0X000000a5 appears when installing the system, because the one-click recovery program requires ACPI support, you can replace the system installation or install the driver with a fully new version of the system installation.

If the graphics card is loose or the gold finger is oxidized, try to insert it after re-cleaning. If it really doesn't work, you can keep the replacement video card.

◇ if the above method does not solve the blue screen code 0X000000a5, you can try the following solution:

1. Comprehensively check and kill virus Trojans and malicious plug-ins.

2. After the power is cut off, open the chassis to clean up the dust, check all the connections, especially the memory bar, unplug the memory, clean the pin and re-insert it firmly; if it is an independent video card, the network card should be dealt with in the same way.

3. Run chkdsk / r at the command prompt to overhaul the partition where the system is located; when the command is restarted, the command will be executed with blue screen and white words, do not interrupt.

4. Set the virtual memory to the partition with more space left.

5. Set BIOS as the factory default; in BIOS, set "ACPI Suspend Type" in the power management settings to S1 (some machines display as STR) or turn off the ACPI option directly.

6. Use the driver wizard 2011 to update the motherboard, graphics card, sound card and network card driver.

Is it helpful for you to read the above content? If you want to know more about the relevant knowledge or read more related articles, please follow the industry information channel, thank you for your support.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.