Shulou(Shulou.com)06/01 Report--

This article will explain in detail how to solve the windows computer crash. The content of the article is of high quality, so the editor will share it with you for reference. I hope you will have a certain understanding of the relevant knowledge after reading this article.

Brief introduction

The editor thinks that the reasons can be found from the following aspects.

Methods / steps

[poor heat dissipation] displays, power supplies and CPU generate a lot of heat at work, so it is very important to maintain good ventilation. If the display is overheated, it will lead to color, image distortion and even shorten the life of the display. Too long working hours can also lead to poor heat dissipation of the power supply or monitor, resulting in a computer crash. The heat dissipation of CPU is an important problem related to the stability of computer operation, and it is also the "worst-hit area" of heat dissipation failure. [improper movement] during the movement of the computer, the large vibration will often make the internal devices of the machine loose, resulting in poor contact and causing the computer to crash, so violent vibration should be avoided when moving the computer.

[dust killer] too much dust in the machine can also cause a crash. Such as floppy drive head or optical drive laser head contaminated with too much dust, will lead to reading and writing errors, serious will cause the computer to crash.

[equipment mismatch] if the motherboard main frequency and CPU main frequency do not match, the external frequency is set too high when the old motherboard overclocking, the computer maintenance training thinks that it may not be able to guarantee the stability of operation, which leads to frequent crashes.

[hardware and software incompatibility] 3D software and some special software may not be able to start or even install normally on some microcomputers, and there may be problems in hardware and software compatibility.

[memory stick failure] is mainly caused by loose memory bar, virtual welding or the quality of the memory chip itself. The contact problem of the memory bar should be eliminated according to the specific situation. If there is a problem with the quality of the memory bar, the memory needs to be replaced to solve the problem.

[hard disk failure] is mainly caused by the aging of the hard disk or the bad track or bad sector caused by improper use. In this way, the machine is prone to crash when it is running. Special tool software can be used for troubleshooting, and if the damage is serious, the hard disk can only be replaced. In addition, for the motherboard that does not support UDMA66/100, attention should be paid to the setting of the running mode of the hard disk in CMOS.

About how to solve the windows computer crash to share here, I hope the above content can be of some help to you, can learn more knowledge. If you think the article is good, you can share it for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.