Shulou(Shulou.com)05/31 Report--

This article mainly introduces the notebook computer how to install memory bar related knowledge, the content is detailed and easy to understand, the operation is simple and fast, has a certain reference value, I believe that after reading this notebook computer how to install memory bar article will have a harvest, let's take a look.

Prepare the tool:

1. Get your laptop, memory stick, and little Phillips screwdriver ready.

two。 The memory bar can be purchased at a physical store or online. Check the model and type of the original memory bar on your computer before purchase, which can be tested by Master Lu.

3. Another thing is to make sure your computer has extra slots before buying, otherwise we will have to buy a larger memory to replace the original memory.

Steps for installing the memory stick:

1. Do not connect the laptop to power, turn the notebook upside down, unlock the battery, and then remove the battery.

two。 Unscrew the back cover with a screwdriver without too much force.

Then slide the rear cover in the direction of OPEN to open it.

3. To find the location of the memory bar, the editor thinks it is relatively easy to find.

The memory bar of the editor is the green bar on the lower right side of the notebook.

4. Take a closer look at the memory slot with a brighter light source and try to estimate the tilt angle of the slot.

Pay attention to the position compared with the groove on the memory bar. When installing, make sure that the groove of the memory slot and the groove of the memory bar do not correspond to the original position.

5. After aligning the position, the memory bar is tilted at a 40-degree angle, and if it is inserted correctly, we will have the feeling of entering.

The editor also does not know how to describe it, if the installation angle is wrong, it is difficult to install accurately.

6. After the memory stick is inserted, the inclination angle just inserted will be maintained, and then the memory stick will be pressed down.

It would be nice to hold the two silver bars on the machine specially used to fix the memory.

7. After installation, close the back cover and install the screws and start up.

After booting, you can use Master Lu to check our memory stick to see if the brand and production time are the same as what the seller said, pay attention to the frequency and type.

Note: when inserting a memory stick, you need to use force, but do not use brute force to prevent damage to the memory stick. You can insert it only when you find the correct position and angle.

This is the end of the article on "how to install memory bars on notebook computers". Thank you for reading! I believe you all have a certain understanding of the knowledge of "how to install memory bars on laptops". If you want to learn more, you are welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.