Shulou(Shulou.com)05/31 Report--

Editor to share with you what win8 desktop memory common faults, I believe that most people do not know much, so share this article for your reference, I hope you will learn a lot after reading this article, let's go to know it!

1. Power on with no display

The reason for this kind of failure of the memory stick is generally due to the poor contact between the memory bar and the motherboard memory slot, which can be solved by rubbing the gold finger back and forth with an eraser (do not clean with alcohol, etc.). In addition, this kind of failure can also be caused by memory damage or problems with the motherboard memory slot.

The mainframe speaker generally beeps for a long time (for Award Bios) due to no display failure caused by the memory stick.

The 2.Windows registry is often damaged for no reason, prompting the user to restore

This kind of fault is generally caused by the poor quality of memory, which is difficult to repair and can only be replaced.

3.Windows often enters safe mode automatically.

This kind of fault is generally caused by the incompatibility between motherboard and memory bar or the poor quality of memory bar. It is common that high-frequency memory is used on some motherboards that do not support this frequency memory bar. You can try to reduce the memory read speed in the CMOS setting to see if the problem can be solved. If not, then only replace the memory bar.

4. Random crash

This kind of fault is generally due to the use of memory strips of several different chips, resulting in a time difference due to the different speed of each memory stick, which can be solved by reducing the memory speed in the CMOS setting, otherwise, only the same type of memory can be used. Another possibility is that the memory bar is not compatible with the motherboard, this kind of phenomenon is generally rare, and it is also possible that the bad contact between the memory bar and the motherboard may cause the computer to crash randomly.

5. With the increase of memory, the system resources decrease.

This kind of phenomenon is generally caused by the incompatibility between the motherboard and memory, which is common in high-frequency memory bars used on some motherboards that do not support this frequency. When there is such a failure, you can try to set the speed of memory a little lower in CMOS.

6. There is often a hint of running out of memory when running some software

This phenomenon is generally due to the lack of remaining space on the system disk, so you can delete some useless files and leave more space, which is generally kept at about 300m.

From the hard disk boot installation of Windows to the detection of disk space, the system prompts that there is insufficient memory.

This kind of failure is generally due to the fact that the user has added the emm386.exe file to the config.sys file, and the problem can be solved by shielding it!

These are all the contents of the article "what are the common memory failures of win8 desktops?" Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.