Shulou(Shulou.com)06/01 Report--

19.12.20 NetHunter version updated to, 2019.4 brush write method remains the same, has been brushed .3 version, as long as the phone is reset, and then directly brush the su, and the new 19.4 package, on the line

This tutorial mainly refers to the installation method in the following link: https://build.nethunter.com/contributors/re4son/angler/

He provides most of the components needed to brush the machine here, but if you completely follow this tutorial, there will be some problems. After some twists and turns, summed up their own method of brushing machine.

* Note: please make sure that your device is unlocked before brushing the machine according to this tutorial, because my device is unlocked when I get it, so I didn't bother with this step. Please Baidu, it's not difficult.

one。 First, make a list of what we need:

The original 7.11 bottom package ROM:angler-n4f26u-factory-131d7b01.zip (available in the link)

The bootloader:bootloader-angler-angler-03.64.img radio:radio-angler-angler-03.78.img corresponding to this base package (in the compressed package of the base package)

TWRP (Recovery) twrp-3.3.1-0-angler.img for 6p (Baidu download)

ADB toolkit: adb.exe AdbWinApi.dll AdbWinUsbApi.dll fastboot.exe libwinpthread-1.dll (available in sdk or Baidu)

Nethunter installation package: nethunter-angler-nougat-kalifs-full-2019.3.zip (official download of www.nethunter.com)

SuperSU:SuperSU-v2.82-201705271822.zip for ROOT

In order to connect to the phone, you may also need a GOOGLE driver. This is my own Baidu. My computer has a development environment, so it can be connected normally.

two。 Once the above components are ready, begin the installation

1. First decompress the downloaded bottom package angler-n4f26u-factory-131d7b01.zip to get bootloader radio and a ROM, and extract the ROM.

Get an image-angler-n4f26u folder with boot.img cache.img recovery.img system.img userdata.img vendor.img in it

two。 Put the files in the adb toolkit and twrp-3.3.1-0-angler.img bootloader radio into image-angler-n4f26u to facilitate command line operation.

Turn off the 3.Nexus6p, then hold down the power and volume-turn it on and enter the message below bootloader. If there is a word device is UNLOCKED, it is unlocked. Just stop here.

4. Connect your phone to your computer with a data cable, hold down SHIFT in the image-angler-n4f26u folder and right-click (WIN7 system) to open the command window here and open the command line.

5. Enter the following command in turn, brush in various components, be sure to brush in in order, if there is any mistake in executing the command, it may be that your driver is not installed or something, Baidu

Fastboot flash bootloader bootloader-angler-angler-03.64.img (the BL corresponding to the bottom package may not be brushed if your version is the same. If it is different, an error will be prompted when you swipe the system later)

Fastboot reboot-bootloader (restart, wait for the phone to return to BootLoader, then execute the following command)

Fastboot flash radio radio-angler-angler-03.78.img (brush into the radio corresponding to the bottom package) if your version is the same, you can also not do it, and if it is different, it will prompt you after the error) fastboot reboot-bootloader (restart, same as above) fastboot erase cache (clean up) fastboot flash boot boot.img (boot, brush in several key data of ROM in turn) fastboot flash recovery recovery.img (official RECOVERY) fastboot flash system system.img (if bl radio is different If you swipe this, you will report an error. If the prompt is not a different version, just brush it again, maybe the cable is not plugged in) fastboot flash userdata userdata.img (this is user data, if you say not to brush, your original data will not be lost, not tried, it is recommended to brush) fastboot flash cache cache.img (cache, brush down) fastboot flash vendor vendor.img (say patch data, anyway) fastboot reboot (restart the system, the bottom package is finished. Must enter the system, do not complete the setting, there is no way to continue to brush) * here to say a few more words, after rebooting into the system, you see if your storage space is not a lot of, I am 64, unexpectedly occupied after brushing, 37G more. The solution is also simple, to the settings, backup inside, restore the factory, this step is very critical, or. It is difficult to recover from the back of the space. It is only here that it is convenient to restore the factory, and then take a look, the space should be normal * version 7.11, there is no need for a special method to skip Google verification, as long as there is no network, just skip it.

6. After all the above is done, turn off the computer, re-enter BootLoader, and prepare to brush in TWRP and ROOT.

Fastboot flash recovery twrp-3.3.1-0-angler.img (just swipe it on the command line)

7. After typing in TWRP, directly in the BL interface, select RECOVERY MODE with the volume key and press the power button to enter.

8. After entering the TWRP, slide to the right and display the main interface. At this time, the phone is connected to the computer, and the drive letter of the phone can be seen directly.

Enter the disk of the phone on the computer and copy the SuperSU-v2.82-201705271822.zip nethunter-angler-nougat-kalifs-full-2019.3.zip to the phone.

(if you encounter problems here and cannot copy files to your phone, you can also copy them into a flash drive, then use OTG to brush them, or use OTG, which is pretty much the same. You just need to MOUNT OTG. I haven't encountered this situation, and it's still very convenient.)

Then click INSTALL on the phone to select SuperSU, enter the ROOT permission, press the return button to return, and continue to enter nethunter-angler-nougat-kalifs-full-2019.3.zip.

After brushing one, I will remind you whether you can choose WIPE cache or not. I have tried it all. It makes no difference.

9. Then choose reboot system to restart into the system, here, all finished, you can play with

There are two Prompt to install TWRP app if not installed Install as a System App prompts when restarting. Cancel the registration directly and click Do Not Install.

Casual chat: the installation method in the original link is to brush into a three-party system (the former CM) directly after brushing into the bottom package, but he did not enter the system to restore the factory steps, resulting in excessive storage space.

And the terminal can not operate normally after brushing, it will flicker, according to my method, the terminal can be used normally.

The Nethunter package provided in the original link is the same as that provided on the current official website.

Bootloader-angler-angler-03.68.img radio-angler-angler-03.81.img is used to upgrade BL and RADIO after brushing. There is little difference between upgrade and upgrade. You can choose by yourself.

Lineage-14.1-20180219-nightly-angler-signed.zip this is the ROM of the tripartite system, we don't need it!

Open_gapps-arm64-7.1-nano-20190803.zip this should be the Google framework, we are using the official package, and we don't need it.

Vendor-n2g48c.img * this is a security update patch that says, but we must not brush it, because the version we brush is different from that after he brushes the tripartite, and the internal error will be prompted if we turn it on.

After all is done, it is recommended to use TWRP to back up the system, so toss out the problem, the next time to restore it, the total brush is not safe!

Note: after Google verification, we don't need to brush it.

Enter the recovery mount menu system partition

Adb shell on the computer

Then execute the command echo "ro.setupwizard.mode=DISABLED" > / system/build.prop / / the test is valid for the 6.0system, because I still have an N7 tablet to verify.

Baidu disk link: link: https://pan.baidu.com/s/1gYhm43pmR97NpKISEgdkjA extraction code: 5qbb put everything you need, the driver inside should be valid, I may have installed this before, this time, there is no need for me to install it, if the driver does not work, you can find your own resources and divide them into directories. If you are not clear, you will download all the files and put them in one directory. Just follow the tutorial, be careful that the version number is not wrong, just say so much, the writing is a bit messy, but if you follow the tutorial, you still have to write in more detail than the rest of Baidu. And this should be regarded as the latest course of 2019.10.08 Ghost Frog.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.