Shulou(Shulou.com)06/02 Report--

What this article shares with you is about how to configure built-in port forwarding in windows. The editor thinks it is very practical, so I share it with you. I hope you can get something after reading this article. Let's take a look at it.

The windows system has its own portproxy function. Currently, only port forwarding based on tcp protocol is supported. The host that serves as portproxy needs to install IPV6, and IPV6 may not be enabled for installation.

Add method

Assuming that you need to connect to port 1494 of 192.168.1.118 through port 14941 of 192.168.1.8, you need to enter the following statement on the command line of the 192.168.1.8 host

Netsh interface ipv6 install (required if ipv6 is not installed)

Netsh interface portproxy add v4tov4 listenaddress=192.168.1.8 listenport=14941 connectaddress=192.168.1.118 connectport=1494

Or:

Netsh interface portproxy add v4tov4 listenport=12035 connectport=8015 connectaddress=172.16.16.97

Cancellation method

If you want to cancel the port forwarding configured above, you can use the following statement:

Netsh interface portproxy delete v4tov4 listenaddress=192.168.1.8 listenport=33891

Or:

Netsh interface portproxy delete v4tov4 listenport=9223 listenaddress=*

View method

If you want to see which ports are configured for forwarding, you can use the following statement:

Netsh interface portproxy show v4tov4

Or:

Netsh interface portproxy show all

The above is how to configure built-in port forwarding in windows. The editor believes that there are some knowledge points that we may see or use in our daily work. I hope you can learn more from this article. For more details, please follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.