Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, connected to the router can not be connected to the Internet solution, connected to the router can not access the Internet, many people do not know, now let's take a look!

Nowadays, many people have a network at home, and there is often more than one computer. Therefore, in order to facilitate the use of the network, the router is particularly important. But sometimes, the failure of the router will often lead to the inability to access the Internet. Many people who don't understand will be very anxious and don't know how to solve it. Today, Bian Shaw will talk to you about the common causes and solutions of router failures:

The router cannot access the Internet:

[question 1] unable to dial.

[failure condition] the normal dialing program cannot be executed.

[reason] the main problem is the address setting of the router.

Solution: the solution to this problem is simple. The specific method is to open a web browser and enter the management address of the router in the address bar, such as 192.168.1.1. At this point, the login password is required (can be found in the product manual). After logging in, enter the management interface and select the WAN port setting option under the menu network parameters. In the main window on the right, select WAN

[question 2] some computers cannot be connected properly.

[malfunction] there is nothing wrong with the router and the connected computer hardware, but it cannot be connected properly, while other computers in the local area network can connect to the Internet normally.

[cause of failure] this is generally due to the inability to connect because ISP binds MAC addresses, because some ISP binds MAC addresses on authentication servers to limit the number of access users, and users outside the binding range cannot surf the Internet normally.

Solution: first connect the computer bound with the MAC address to the LAN port of the router (but the router does not connect to the cable provided by Modem or ISP), then use the router's MAC address cloning function to copy the MAC address of the network card to the WAN port of the broadband router, and then do the following on the unbound computer: under Windows 2000/XP, press "start" and enter "cmd/k ipconfig / all".

[question 3] unable to browse the web.

[malfunction] the web page does not open properly, but programs such as QQ can run normally.

[cause of failure] this situation is a DNS parsing problem on the router. If the gateway is set to a DNS address, it is a DNS proxy, not a real DNS address, which may result in an address resolution error.

Solution: to solve this problem, it is recommended to manually set the DNS server address (the address provided by the ISP office) on the router and computer network card, open the router settings interface, find the field of WAN port parameters in the network parameters, and then manually set the DNS server address below. In addition, in the DHCP Services setting, you need to manually set the DNS server and alternate DNS server addresses, which need to be obtained from the ISP provider.

[question 4] unable to log in to the router management page.

[failure phenomenon] I want to set up a shared Internet connection for the enterprise broadband router, but I can't get into the management interface.

[reason for failure] the connection error created the last time you logged in.

Solution: if you have logged in to the router management interface before, the user should first check the hardware connection between the broadband router and the computer, and check that the light on the router's LAN port is normal. If the computer is equipped with a firewall or real-time monitoring antivirus software, temporarily shut down, then set the local IP address to the same network segment as the broadband router, and then set the gateway address to the router's default IP address. General broadband routers provide Web management methods, so open the Internet options dialog box. In connection options, if you have ever created a connection, select the never Dial-up connection option, and then click the LAN Settings button to deselect all selected options.

There are many reasons why routers cannot access the Internet, and the above four are the most common. In fact, it is very common that routers do not have access to the Internet. As long as you know more about the router, you can find out the cause, solve the problem, and you will be able to surf the Internet smoothly. Please pay attention to more information, Bian Shaw will organize more content for you.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.