Shulou(Shulou.com)05/31 Report--

This article will explain in detail how to solve the problem of computer boot restart. The editor thinks it is very practical, so I share it with you as a reference. I hope you can get something after reading this article.

First, our more common system restart problem is the loss or corruption of operating system files.

Solution:

The operating system boot has a boot file boot.ini, if it is lost, the system boot can not find it will restart. We first repair the system with system repair tools, such as making our own winPE. After entering, we can use the system repair tools, or use the repair tools attached to the free online ghost system to repair. If the repair is not successful, then the system will have to be reinstalled.

Second, the memory in the mainframe may be loose or the motherboard may be short-circuited.

Analysis: this situation is generally due to too much dust in the chassis, poor memory contact or short circuit on the motherboard due to dirt, and another situation is caused by static electricity.

Solution:

First open the chassis, unplug the memory, then wipe the gold finger with waste newspaper, simply dispose of the dust, and then reseat it. Then, by the way, simply clean up the motherboard dust and put down the static electricity.

Reminder: do not wipe the motherboard with a wet towel when cleaning the motherboard. You should clean it with a strong blow. To discharge static electricity is to unplug the mainframe power cord, and then press the boot button)

Third, there is another situation in which the software conflicts with the system driver.

Solution:

Press F8 when starting up, and then go to safe mode to uninstall the newly installed software (according to the editor's experience, the most likely conflict is the video card driver).

Fourth, the motherboard has a capacitor burst.

This is very obvious if you open the chassis and take a closer look. If you want to repair, you can only go to the repair point to re-weld the same size capacitor, this actually does not cost much money (within 100 yuan), as long as you know that the capacitor burst, do not let people tell you that it is a chip fault.

Key points:

So how should we judge the above four situations? they are actually very simple. First of all, we can try to enter the winPE, if it can be entered, and there will be no reboot, then it is not a hardware problem, then it is problem one or problem three above. If you can't get in, it's caused by the hardware, and it must be the problem two or four above.

If we are sure it is not a hardware problem, then we can try to enter safe mode, and if we can get instructions, it is not a restart caused by the boot file. We can try to see if it is caused by the driving conflict.

This is the end of the article on "how to solve the problem of computer boot restart". I hope the above content can be helpful to you, so that you can learn more knowledge. if you think the article is good, please share it for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.