Shulou(Shulou.com)06/02 Report--

In fact, all arrays are configured in much the same way. As long as you know how the array works. Have operated a server, other brands of the server operation method is similar!

The following is the method of creating RAID with DL380G7 (DL580G7) and DL388G9, which is put on the blog for easy query.

DL380G7 (DL580G7):

In method 1, the Bios configuration process is as follows:

1. HP Smart Array P410 detected by post

(if you don't see this message

Press any key during the self-test (when you see press any key to view rom rom messages)

Press the space bar several times to display this message)

Press F8 to enter the array configuration interface, select Create Lgical Drive, and press enter to continue.

two。 Use the spacebar to select the hard drive to configure Raid on the left, press the Tab key to move the cursor to the right and press the spacebar to select the Raid level to configure.

Only 1 raid level can be selected at a time

3. Press F8 to save and press enter to continue.

4. Select View Logical Drive to view the status of the configured array.

5. Press enter to check the status of each hard drive.

Method 2 DL388G9:

This paper mainly introduces the method of configuring array for HP ProLiant ML350 Gen8 server Smart Storage Administrator.

two。 Select HP Smart Storage Administrator (SSA) as shown below:

3. The first interface after entering SSA is shown below:

4. Select the following figure in order to enter the array configuration interface:

5. Select "Create Array":

6. Select the hard drive required to configure the array here:

7. A green tick appears in the following figure to indicate the selection:

8. Move the mouse to the lower right corner of the interface and select "Create Array" to create an Array:

Next, set up Logical Dirver, return to the superior menu, and select Create Logical Driver

9.RAID Level: sets the type of raid. Size: set the size of this array, which is generally the default.

10. Move the mouse to the lower right corner of the interface and select "Create Logical Drive" to create the array:

11. At this point, you can see a preview of the entire array. Move the mouse to the lower right corner of the interface and select "Finish" to start creating:

twelve。 After selecting "Finish", you can see the current array status, and you can view the current array health through the red box of the following figure:

13. View the current Array:

14. Type and size of the current array:

15. Click the current Logical Drive to see the details of this array:

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.