Shulou(Shulou.com)05/31 Report--

This article mainly shows you the "win10 boot can not detect the hard drive how to do", the content is easy to understand, clear, hope to help you solve the doubt, the following let the editor lead you to study and learn "win10 boot does not detect the hard disk how to do" this article.

The main results are as follows: 1. After long use, the oxidation of the gold finger on the back circuit board leads to poor contact. Solution: remove the circuit board and clean the oxide on the gold finger.

2. Too many ide devices on the computer, resulting in an increase in initialization time, but no increase in the corresponding self-test time, resulting in the system can not detect the hard disk or detection timeout. Solution: extend the time setting, find the "boot delay time" option or "ide delyay time" in bios, and the motherboard bios without this option can also set the number of memory self-tests to 3 times to extend the self-test time.

3. When the computer is out of use for a long time and is in a damp environment, the components on the hard disk will be damp, which is also a problem that the hard disk can not be detected. Solution: disconnect the power supply and use a hairdryer to evenly heat and dehumidify the hard disk.

4. Power quality problems or loading too many devices, resulting in low + 12v voltage output, resulting in the hard disk can not work properly. Solution: replace the power supply with good quality or high power.

5. The hard disk data cable and power cable are loose, oxidized or broken. Solution: try to change the power connector, data cable or ide/sata interface.

6. Some motherboards have turned off the sata interface and can not find the sata hard disk solution: turn on the sata interface in the bios.

7. On the "standard cmos feaures" page of bios, set the hard drive to none.. Solution: set it to auto.

8. Ide jumper setting is incorrect. Hard drives and other ide devices sharing data cables all set the jumper to "master" or "slave" solution: change one of the ide jumpers.

9. Overclocking the system causes the hard drive not to work properly. Solution: return to the default setting or reduce overclocking.

10. The cause of the physical bad track on the hard disk. Solution: if the above methods can not solve the problem, it is best to send the factory for maintenance, if there is important data, you can first go to the reputable data recovery company to recover the data.

The above is all the contents of the article "what to do if the hard drive is not detected when win10 boots up". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.