Shulou(Shulou.com)06/02 Report--

Since the former network engineer left and failed to hand over the password of a server, it can only be cracked through the PE of USB disk. The following mainly describes the cracking process:

1. Download the ISO package of PE and write it to the hard disk directly through UltraISO, or download the commonly used PE production tools

2. Set up the server R730 to boot from the USB disk

(1) when a prompt appears in the upper left corner after boot, press F2

(2) enter the system BIOS selection menu: select system bios enter

(3) Select boot settings enter-BIOS Boot Settings

(4) BOOT MADE selects UEFI

(5) Save and exit

3. Download the raid card driver of the server on the official website, put it in the root directory of U disk, boot into PE with U disk, find the driver installation configuration file .inf, right-click and select "install". After the system pops up "operation completed successfully", you can load hard disk partition information.

4. Use the password cracking software that comes with PE, select the SAM path, unlock or change the password (select the SAM path where the system drive letter is installed)

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.