Shulou(Shulou.com)06/02 Report--

How to use minicom HyperTerminal under ubuntu

My system environment is ubuntu12.04 www.2cto.com 1: download and install minicom # sudo apt-get install minicom 2: run the minicom # sudo minicom-s / / command to enter the configuration interface (or run # sudo minicom directly, then press ctrl+A, and after pressing Z, press O again Also enter the configuration interface) +-[configuration]-+ | Filenames and paths | | File transfer protocols | | Serial port setup | | Modem and dialing | | Screen and keyboard | | Save setup as dfl | | Save setup as.. | | Exit | | Exit from Minicom | +-- +-[configuration]-+ | File name and path | File transfer Protocol | Serial port settings | Modem and dial-up | screen and keyboard | Settings are saved as dfl | Settings are saved as.. | exit | exit Minicom +-+ www.2cto.com 3. Configure Serial Port Select "Serial Port Settings" Enter the serial port configuration interface +-+ A-serial device: / dev/ttyS0 B-lock file location: / var/lock C-call program: d-call Out of the program: e-Bps/Par/Bits: 115200 8N1 F-hardware data flow control: no G-software data flow control: which setting do you want to modify? 4. There are two save options for saving the configuration: "Save settings as dfl" and "settings save as.." Settings as dfl: save the configuration as the default configuration, and the next time you run the "sodu minicom" command, automatically enable the configuration settings to be saved as.. Save the configuration file and enable it the next time you run sudo minicom configuration name For example, if I save the configuration file as myconf, running sudo minicom myconf will enable the configuration. 5. There are two exit options: exit, exit Minico exit: exit the configuration interface, and enable the current configuration exit Minicom: exit software 6. Enable configuration file run sudo minicom configuration name to enable configuration. If the configuration name is empty, the default configuration is enabled. Next time, you can enter it directly by typing minicon. The command minicom is to enter the serial hyperterminal screen, while minicom-s is to configure minicom. Note / dev/ttyS0 corresponds to serial port 0 for your port to connect to the development board. Note: if minicom is closed abnormally, several files will be created under / var/lock. LCK*, these files prevent minicom from running. Delete them and restore them.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.