Shulou(Shulou.com)05/31 Report--

This article mainly introduces the relevant knowledge about the differences between various pipe fittings of Revit electromechanical pipes, the content is detailed and easy to understand, the operation is simple and fast, and has a certain reference value. I believe that you will gain something after reading this Revit electromechanical pipe fittings. Let's take a look at it.

I. Preface

First, let's take a look at how many pipe fittings are generated by API:

There are explanations in English above, maybe people who are good at English will understand it, but the editor is different, the kind that can't live without translation, so leave what you understand in English, because what you say below is similar to what you know. two。 Noun interpretation

In the above six generation methods, except that NewTakeoffFitting is special, the rest belong to the generation of different pipe fittings.

2.1NewUnionFitting

This is the live joint generation method provided by API, the live joint does not use a lot, generally used on the small diameter, such as household pipes, a variety of instruments, easy to disassemble.

It looks like this:

2.2NewTransitionFitting

This is called a transition part, which is generally called large and small head accessories, and this one is used more often. Individuals have tried to use the NewUnionFitting method to generate TransitionFitting components, but did not report an error, this is mainly affected by the configuration of the routing system, but you can not generate it with other methods, will report an error. The main reason is that the connectors of these two accessories are on the same line. Size head transition:

2.3NewElbowFitting

This should be more methods used to write secondary development, elbows, all pipe turns can be used by him. All three of the above methods require only two connectors, which may cause confusion if you are not familiar with them. 2.4NewTeeFitting

This is a three-way connection.

2.5NewCrossFitting

This is a four-way connection.

A total of the above five pipe fittings, after a clear understanding of the secondary development of the pipeline will have a new understanding. How do you recognize these fittings for Bimer or programmers who don't do mechatronics? Pipe fittings are also classified in lookup. The type of pipe fitting is given in-MechanicalFitting-- Part type.

You can see that this is an elbow, just use the corresponding NewElbowFitting method.

3. The remaining NewTakeoffFitting,NewTakeoffFitting is not a special type of fitting generation method, its function is similar to the function of trimming and extending. As shown in the following figure:

By giving a connector and a wire, a tee is automatically generated. The API is as follows:

The process of generation is roughly as follows:

This is the end of the article on "what are the differences between various pipe fittings of Revit electromechanical pipes". Thank you for reading! I believe you all have a certain understanding of the knowledge of "what are the differences between the various fittings of Revit electromechanical pipes". If you want to learn more knowledge, you are welcome to follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.