Shulou(Shulou.com)06/01 Report--

Unset all clears all configurations, resumes factory configuration reset restart will ask you if you want to keep the configuration, select no, and finally ask you if you are sure to restart, choose yes

Default username and password for factory value: netscreen

Get interface View Interface

HZ-FW- > get performance cpu to view CPU usage

Part of Juniper firewall: 1.ip address get int2. All the configurable zone of the interface get int3.zone segment get zone4.VR virtual router get vrouter belongs to the trust-vr5.Vsys virtual system get vsys by default

Ip belongs to interface, interface to zone,zone belongs to virtual router, virtual router belongs to vsys

Set interface E1 ip 192.168.1.1 Plus 24 assign an ip to E1 interface

Set interface trust port 1 phy full trust has four interfaces, which is defined as full duplex for interface 1.

Get system to view system information, such as version

Set interface trust mange ping allows trust interface pingset interface trust mange telnet allows trust interface telnetset interface trust mange web allows trust interface webset admin telnet port 1025 to set the port of telnet to 1025set admin root access console only allows root users to console port problems, does not allow telnet access to get session to view sessions

Set hostname hz-fw set hostname

Set admin password 1234 set the administrator's password to 123get license-key to view the authorization file of the current firewall lock (DI deep filtering IPS function, dual-machine hot backup NSRP)

Upgrade ScreenOSsw1- > exec save software tftp 10.0.1.2 ssg500.6.3.0r3.0

Set config View configuration

Exec save sofware from flash to tftp 10.10.1.2 ssg500.6.3.0r3.0 system boots to 10.10.1.2 host

Get route View routing tabl

Save configuration Save

Save config from flash to tftp 10.0.8.2 config saves the firewall configuration to the local TFTP server

The default user name is netscreen password netscreen (netscreen is equivalent to root user) set admin password cjclub changes the administrator's password to cjclub

The name of set zone name DMZ setting zone is DMZset interface eth3 zone DMZ eth3 and the API is put into DMZzone.

Ns5gt- > get config saved to view saved configuration

Ns5gt- > get config rollback to view the configuration of rollback

Jiaxing-zongbu- > set console timeout 0 sets the console timeout to 0

Ns5gt- > set admin auth banner telnet login netscreen-juniper modifies the banner information displayed during firewall login (only root users can set it)

Ns5gt- > set admin auth web timeout 0 sets the webui timeout to 0 (only root users can set it)

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.