Shulou(Shulou.com)06/01 Report--

Today, I will talk to you about the difference between formatting and quick formatting in Windows. Many people may not know much about it. In order to make you understand better, the editor has summarized the following content for you. I hope you can get something according to this article.

As the name implies, you can literally know that the speed of fast formatting is faster than the speed of formatting!

They also have the following differences:

First, the data after formatting (low grid) cannot be recovered, while the data in the hard disk can be recovered by software after fast formatting, because the essence of fast formatting is to delete the number on the hard disk.

According to the full format, the hard drive is really reclustered.

Second, quick formatting deletes files on the disk, but does not scan the disk to see if there are bad sectors.

Third, generally speaking, fast formatting is better than complete formatting, because on the one hand, it can be formatted quickly, and on the other hand, there is less wear and tear on the hard disk. But if

If it is suspected that there may be bad channels on the hard disk, it should be fully formatted and a complete scan of the hard disk should be carried out. Complete formatting will mark the bad channels on the hard disk to prevent subsequent use.

The use of bad hard drives can be improved to a certain extent.

So when using hard drives, you should try to use fast formatting!

Quick formatting only deletes the files on the hard drive; full formatting is really reclustering the hard drive.

Generally speaking, quick formatting is better than full formatting, because on the one hand, it can be formatted quickly, and on the other hand, there is less wear and tear on the hard disk. But if you doubt it,

If there may be bad channels on the hard disk, it should be fully formatted and a complete scan of the hard disk should be carried out. Complete formatting will mark the bad channels on the hard disk to prevent subsequent use.

The use of bad hard drives can be improved to some extent.

Quick formatting clears only the file location information in the partition table, while formatting clears all file information.

System installation: the difference between plain formatting and quick formatting

When you choose to run a regular format on a volume, files are removed from the

When you choose to run a frequently formatted volume, the file is deleted

Volume that you are formatting and the hard disk is scanned for bad sectors. The

Volume, your format and hard disk scan bad sectors. The

Scan for bad sectors is responsible for the majority of the time that it takes to format a volume.

Scanning bad sectors is responsible for most of the time before the volume is formatted.

If you choose the Quick format option, format removes files from the partition

If you select the Quick format option, delete the partition of the file format

However, bad sectors of the disk are not scanned. Only use this option if your hard drive is formatted before diskhas and you are sure your hard drive is not damaged.

If you installed Windows XP on a partition that was formatted by using the Quick

If your partition with Windows XP installed is formatted, use Quick

Format option, you can also check your disk by using the chkdsk / r command afte

R the installation of Windows XP is completed.

Format option, you can also check your disk and use the chkdsk / r command after to complete the Windows XP installation.

After reading the above, do you have any further understanding of the difference between formatting and quick formatting in Windows? If you want to know more knowledge or related content, please follow the industry information channel, thank you for your support.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.