Shulou(Shulou.com)06/01 Report--

This article is about the win10 system U disk does not recognize how to solve, the editor feels very practical, so share with you to learn, I hope you can learn something after reading this article, do not say much, follow the editor to have a look.

The workaround for no flash drive is not displayed:

Check the flash drive!

Turn up the computer volume, reconnect the flash drive, listen to the prompt when the flash drive is inserted, and if possible, connect the flash drive to another computer to test. If there is a prompt sound when connecting to the computer, but the U disk is not displayed, please refer to the following method to solve the problem.

Method 1: restart the flash drive

1. While holding down "win+X", select "device Manager" in the pop-up page.

2. On the device manager page, as shown in the figure, find the universal serial bus controller, right-click "USB mass storage device", and select "enable device".

Method 2: rescan the disk

1. Hold down "win+X" at the same time, and select "disk Management" in the pop-up page

2. On the disk management page, starting from disk C, click "Action (A)" on the toolbar and select "rescan disk (R)" for each disk selected.

Check the interface!

In the same USB interface, connect to other devices, such as mouse, keyboard, etc., if it can be used normally, it means there is no problem with the interface. If there is a problem with the interface, if you rule out the cause of the damage to the interface itself, it is possible that BIOS has disabled the USB port. Please refer to the following method to solve the problem.

Method 1: restore the BIOS default value

1. Restart the computer. When the boot screen appears, press Esc to enter the BIOS interface.

2. Press F9 to restore the BIOS default dialog box, select "YES" and enter

3. Finally, press enter to save and restart the computer

Method 2: open the USB port

1. Restart the computer. When the boot screen appears, press Esc to enter the BIOS interface.

2. Use the computer arrow keys to move around to the "Security" tab, select "I Port Access O Port Access" and enter.

3. Select "USB Port" and enter, then set it to "Enabled", and finally press F10 to save the settings.

The above is the win10 system U disk does not recognize how to solve, the editor believes that there may be some knowledge points that we may see or use in our daily work. I hope you can learn more from this article. For more details, please follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.