Shulou(Shulou.com)06/02 Report--

This article is to share with you about the use of standby buttons. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

Standby is the standby button in the audio, and many stereos are equipped with this button. After the power is plugged in, it is not immediately powered on, but in the standby state, and then press the standby button to turn on the power to start the work; the design of the standby button can facilitate the use of remote control operation, and remote start-up, shutdown and other operations can be realized in the standby state.

Standby: stand by.

Many stereos are equipped with this button, after the power is plugged in, it is not immediately powered on, but in the standby state, and then press to turn on the power and start to work.

The design of this button, you can easily use remote control operation, in the standby state can achieve remote start-up, shutdown and other operations, more user-friendly.

Extended data

Matters needing attention in the use of sound

First, put the equipment in the cabinet. Out of decoration and protection, some people put the equipment into the custom-made cabinet, which will make the timbre muddy due to the latent vibration caused by the space in the cabinet, and the power amplifier and other equipment are easy to overheat and age because they do not have enough air circulation. If you put the speaker on the wall, it will make the sound effect stiff.

Second, stack equipment. Many people like to overlap VCD players, amplifiers, tuners, digital-to-analog converters and other machines, which will cause mutual interference, especially the serious interference between the laser camera and the power amplifier, which will make the tone hard and depress. The right thing to do is to put the equipment on the sound rack designed by the factory.

Third, there is no distinction between positive and negative power plugs. Power plug positive and negative processing of a good system, distinct levels of timbre, natural and smooth; positive and negative inconsistency or uneven, the timbre will be hard and rough.

Fourth, the wiring is not firm and unclean. If the tone of the system is dry and hard, one of the reasons may be poor contact, such as weak plug, oxidation of the contact surface, dust or oil stains, etc., so it should be checked frequently to keep the contact surface clean.

Fifth, use dolomite or glass to carry equipment. Dolomite has low density and high resonance, which will affect the sound effect. The density of glass is higher than that of dolomite, but it is not thick and resonant. Available granite or sesame stone, especially sesame stone, has the highest density and ideal bearing equipment, but the thickness is more than 3 cm.

Sixth, the placement of speakers "in line with local conditions". Because there are other furniture in the room, some people put the speakers in place to accommodate the furniture. The right thing to do is to determine the listening distance, and then place the speaker at 1 stroke 3 between the seat and the opposite wall. the distance between the speaker and the speaker is 0.7 times the direct distance between the listener and the speaker, and the height should be flush between the listener's ear and the tweeter.

Thank you for reading! This is the end of this article on "what is the use of standby buttons?". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.