Shulou(Shulou.com)06/02 Report--

1. Active ATC system

The following settings are valid for "take-off" flights only

1. Modify the FDP server fdp process configuration file: fdp.ini

SendAddrForFPL = ZBYNZPZX ZBYNZXZX ZSHAZMFP ZBPEZMFP ZBBBZFPM ZSSSZFPM

/ / only the FPL report of the sending address defined here will intervene (create) the plan and modify the dynamic.

2. Modify the FDP server fdoagent process configuration file: db.ini

# fdoagent is responsible for writing the received messages to the database. Unless the sending address of the FPL message in the "departure" AFTN format is defined here, it is determined to be "stored in the database" as the SITA message type and RLS (release message) subclass, but it does not affect the dynamic function of the fdp process above to receive FPL message updates.

SendAddrForFPL=ZBYNZPZX ZBYNZXZX ZSHAZMFP ZBPEZMFP ZBBBZFPM ZSSSZFPM / / cannot exceed 100 characters

3. The address ZBYNZPZX ZBYNZXZX of this field cannot be removed, otherwise the "sending of this system" cannot be associated with the plan. Which of the two items will work?

2018-11-13

Second, standby ATC system

AirNet large version: 2.1.0-P2 (fdp version: 3.8.15) begins to have this feature.

[one]. Configuration changes required for normal reception and processing of telegrams sent by the centralized processing center of the flight plan:

By default, the AirNet system treats the FPL report of outgoing flights whose sending address is not the address of this station as a release report, so after implementing the centralized processing of the flight plan, you need to modify the sendAddr parameter value of the [fpl_sendAddr] group in the / home/cdatc/AirNet/bin/conf/fdp_offline.ini file of all FDP servers and add the sending address of the centralized processing center of the flight plan, as shown below:

[fpl_sendAddr]

/ / the local FPL message sent at the following address is still processed according to the FPL message, otherwise it is processed according to the release message. Unlike Sichuan University, there is no need to add the local address (which does not affect the processing of the local address), only the address outside the address.

SendAddr=ZUUUZXZX ZSSSZRZX ZZZZZPZX

Note:

1. "if there is no fdp_offline.ini file under / home/cdatc/AirNet/bin/conf, you can copy the fcs.ini in that directory as fdp_offline.ini:"

Cp fcs.ini fdp_offline.ini

Or create a new fdp_offline.ini file as cdatc:

Vi fdp_offline.ini (open the vi editing interface and save after modification)

two。 After the modification, you need to restart the fdp process for the configuration to take effect.

[2]. Configuration changes that need to be made to send the telegram to the centralized processing center:

It is necessary to add the receiving address of the centralized processing center to the receiving address information of the air route information, which is the basic data of FDD. You can also log in to the database server of the AirNet system, and after entering mysql mode, use the following SQL statement to modify the table data in the database directly:

Update atcdb.tab_teleaddr set addr = concat (addr,' XXXXXXXX')

Note:

1. Be sure to add an English space before the address you want to add.

two。 It is recommended that you first specify a specific route in the SQL statement for modification test, and confirm that the modification is successful, and then make a unified modification, as an example:

Select * from atcdb.tab_teleaddr where routename = 'ZUUUZBAA'

Update atcdb.tab_teleaddr set addr = concat (addr,' XXXXXXXX') where routename = 'ZUUUZBAA'

3. The modification will take effect automatically 1 hour after completion (the system automatically re-reads all the basic data in the database every 1 hour).

2017-10-30

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.