Shulou(Shulou.com)06/01 Report--

This article introduces the relevant knowledge of "how to improve the running speed of XP system". In the operation of actual cases, many people will encounter such a dilemma, so let the editor lead you to learn how to deal with these situations. I hope you can read it carefully and be able to achieve something!

1. Block network sharing function

If our computer is not in the unit local area network, then the network sharing feature that has been enabled is of no use at all, and its existence will hinder the startup speed of the system. If we want to improve the startup speed of the system as much as possible, we can completely block out the network sharing features that have been enabled by the local system. Here are the specific shielding steps:

First, execute the "Settings" / "Control Panel" / "Network connections" commands in the Windows system "start" menu, open the local computer's network connection list window, find the "local connection" icon, and right-click the icon, execute the "Properties" command from the shortcut menu that appears later, and open the local connection properties settings window.

Secondly, in the window's "General" tab page, find the "Microsoft network file and printer sharing" option in the list box of "this connection uses the following items", and cancel the check mark in the box in front of the option, and finally click the "OK" button to close the property settings window, so that the system will not take the time to check the content of network sharing the next time it starts.

2. Shielding complete control function

Each time the computer system starts, it automatically searches and scans the relevant shared folders on the local hard disk, and if the access properties of the shared folders are set differently, the system scans the target shared folders at different times. For example, if a shared folder is set to read-only permission, it may only take 1 millisecond for the system to scan the shared folder, but when the access permission for the shared folder is set to full Control, it may take 1.5 milliseconds for the system to scan the shared folder, thus it can be seen that when the full Control feature of the shared folder is enabled The startup speed of the system will also be affected to a certain extent. For this reason, when we do not want our shared resources to be edited and modified at will, we simply set the property of the shared folder to "read-only" instead of taking it for granted that it is "fully shared". After all, under this access property, the security of the shared folder is not guaranteed, but also affects the startup speed of the system. To block the full Control feature of the target shared folder, you can follow these steps:

First open the explorer window of the system, and find the target shared folder in this window, then right-click the corresponding folder icon, select the sharing and Security command option from the shortcut menu that appears, and open the property settings window to the target shared folder.

Secondly, click the "Security" tab in the property settings window to open the tag settings page. In the "Group or user name" list box on this page, select the specific user account for which you often log in to the system. For example, the author chooses the "ower" account here.

Next, in the corresponding "permissions of ower" list box, select the "full control" project, and uncheck the status in the "allow" box of the option, so that we can block the "full control" function of the target shared folder, and then activate the "read" permission or "write" permission of the target shared folder according to the actual access needs, and finally click the "OK" button. I believe that in this way, the startup speed of the system can be further improved.

3. Block the automatic search function

When starting a computer with a Windows XP system, the computer will generally search for all shared resources in the LAN environment on its own, and it is obvious that this self-assertive "behavior" will also affect the fast startup of the computer system. In order to improve the startup speed of the system, we can block the function of the local system to automatically search for shared resources as follows:

First open the explorer window of the local system, click the tools option in the menu bar of the window, click folder options from the drop-down list that appears later, and go to the system's folder option setting interface. click the View tab to open the options settings window

Find the "automatically search for network folders and printers" option in this window, uncheck the check mark in the box in front of the option, and then click the "OK" button. In this way, the computer system will not spend time automatically searching for other shared resources in the LAN environment the next time it starts, so the system startup speed should be significantly improved.

4. Shielding automatic allocation function

The "automatic assignment function" mentioned here actually refers to the function of the Windows system to automatically assign IP addresses to local network card devices by default. Once the IP address of the local network card is set to be obtained automatically, each time the computer system starts, it will spend a certain amount of time to apply for a dynamic IP address that can be used from the DHCP server in the local area network. If the DHCP server is not available, the computer system will try to connect and access the DHCP server repeatedly until the access times out. In this way, the startup speed of the system will be seriously affected, and even the system will be suspended. In order to prevent the system from spending time connecting and accessing the DHCP server during startup, we just need to set a static IP address for the Nic device in advance. Assigning a static IP address to the Nic device can be done as follows:

First, click the "start" / "Settings" / "Network connection" / "Local connection" command to go directly to the "Local connection" property setting interface of the local system. In the "General" tab page of the setting interface, select the "Internet Protocol (TCP/IP)" option, and click the "Properties" button in the corresponding page to open the property setting interface. Select the "use the following IP address" option in the settings interface, and specify an IP address for the Nic device in the same subnet as the ADSL device address. For example, if the IP address of an ADSL device is generally "192.168.1.1", then we can set the network card IP address to "192.168.1.11", the subnet mask address to "255.255.255.0" and the gateway address to "192.168.1.1".

Next, select "use the following DNS server address", and then fill in the real DNS server IP address of the local ISP here. For example, if the real DNS address of ISP is "61.172.7.1", then we can fill in the address here and click OK to save the above IP address parameters. I believe that in this way, the computer system will not need to take the time to access the DHCP server when it is started, so the system startup speed will certainly be asked to climb another tall building.

5. Block the network mapping function

In order to facilitate quick access to the shared folder on each other's computer after each boot, many people often map each other's shared folder to a disk partition in the computer through the network mapping function. Although this method brings great convenience to sharing access, it has a great impact on the startup of the system. after all, the system takes time to search, scan and connect to each other's shared folders every time it is started. in fact, we do not need to access each other's shared folder every time we boot, it is obvious to enable the network mapping function of the shared folder at will. It will seriously slow down the startup speed of the computer system.

In order to ensure that the system startup speed is not affected, we can follow the following steps to disconnect the network mapping connection that is not currently used on the local computer:

First, double-click the "my computer" icon on the system desktop with the mouse, click the "tools" item in the menu bar in the pop-up window, and execute the "disconnect network drive" command from the subsequent drop-down menu. then select one of the temporarily unused network drive partition letter, and then click the "OK" button.

Of course, we can also directly use the "net use" command to disconnect the network mapping. when we use this method to block the network mapping function, we only need to open the system operation dialog box and execute the "cmd" string command in it to switch the system interface to the MS-DOS command line state. Then execute the "net use x: / del" string command at the DOS prompt to disconnect the network disk partition to "X". To quickly disconnect all the network mapping connections on the local computer, you only need to execute the "net use * / del" string command.

This is the end of the content of "how to improve the running speed of the XP system". Thank you for reading. If you want to know more about the industry, you can follow the website, the editor will output more high-quality practical articles for you!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.