Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

Building VMware Enterprise Virtualization platform

2025-02-24 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >

Share

Shulou(Shulou.com)06/03 Report--

At present, there are a series of problems in enterprise information construction, such as the surge in the number of servers and insufficient utilization, the increase of energy consumption and the difficulty of operation and maintenance, the low level of data security and customer satisfaction, and so on. Virtualization technology is common in the society, and what we mainly introduce in this article is how to build a virtualization platform.

First of all, we need to open vsphere client by logging in to the client, and create three new hosts, one of which is installed as a server host. It is recommended to use the first one for convenience; one is built here for demonstration.

After the first deployed host is powered on, open the console and enter the configuration interface of the server host to configure. In the first configuration interface, you need to send ctrl+alt+delete to enter.

After entering, select the location of the installation disk, and select the default under local.

Next, choose the option US Default, the American syntax commonly used by computers.

The next step is to set the root password, and set the 1qaz here! QAZ, (it is recommended that the password be unified during the experiment to facilitate memory. ) enter.

Enter and proceed to the next step, which is a confirmation interface. F9 returns and F11 confirms, so just press F11 to confirm.

Then just wait for the progress bar.

After the progress bar is finished, press F2 to open the management interface, configure the IP address of the host, and enter the password set before, (1qaz! QAZ), Login name is the root administrator.

To move the steering wheel, select the option selected in the right box for IP address, and then select the ipv4 option to configure the IP address of ipv4.

Come to this step, the host is ready, but, in order to confirm whether there is an error, it is best to check the unobstructed status of the network, enter after entering, enter the IP address set by yourself to check.

The host part is done, and then there is the installation part of VCSA. To install VCSA, download the image file of VCSA from the customer server, and select installer in\ VMware-VCSA-all-6.5.0-7801515\ vcsa-ui-installer\ win32 to configure and install.

After entering, select the first one to enter the following interface, click next, and proceed to the next step.

Select the option indicated by the arrow and click next next.

Configure the IP address configured above to act as the host of the server. The port defaults to root user name, and the password is the same as the original unified password 1qaz! QAZ, after setting up, proceed to the next step.

Here is the name of setting VM, which can be chosen at will. For example, I take the third group I belong to as an example, the suffix is set to for group 3, indicating that I am in the third group, and the password is the same as 1qaz! QAZ .

Default. Next step.

Check Enable thin disk mode, next step

Network default, ipv4,static (static), 192.168.1.36 this is after installing VCSA, log in to the IP address of VCSA, and then set the mask, gateway, dns, you can proceed to the next step.

Here is just the confirmation interface, after confirmation, you can enter the installation progress bar, this installation process is a bit long, to maintain the smooth flow of the network, it is best not to do something else, so as to avoid installation failure

Done. Here is to click Continue to finish in part.

The next step is to enter the configuration of part II.

Even this is the default to the next step.

The third item is to set up the SSO configuration interface. The first one is to set the login domain name to vsphere.local, the second and the third is the login password and confirmation password, and the last one is the station roll call. After setting up, you can take the next step.

The next step is to default to the next step and check the interface here, and then you can wait for the progress bar to be installed. After the installation is complete, you can test it on the web page.

Enter your own IP address of login VCSA 192.168.1.36 on the web page to log in. Successful entry proves that VCSA has been successfully installed.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Servers

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report