Shulou(Shulou.com)06/02 Report--

Borrow third-party software esnp configuration

``

It is best for the diagram and the command to cooperate with each other to understand.

Step 1: configure the interface address of R1

System-view enters the system to try

[Huawei] sysname R1 changed its name to R1

[R1] interface GigabitEthernet 0Universe 0 enters the interface, 0Universe 0ap0 enters the interface

[R1-GigabitEthernet0/0/0] ip address 192.168.2.1 255.255.255.0 set the ip address

[R1] interface GigabitEthernet 0Uniqq1 enters interface 0 / 0Uniq1

`

[R1-GigabitEthernet0/0/1] ip address 192.168.1.254 255.255.255.0 set the ip address

R2 and R3 have the same R1 command

Step 2: configure the interface address of R2

System-view

[Huawei] sysname R2

[R2] interface GigabitEthernet 0/0/0

[R2-GigabitEthernet0/0/0] ip address 192.168.4.254 255.255.255.0

[R2] interface GigabitEthernet 0/0/1

[R2-GigabitEthernet0/0/1] ip address 192.168.2.2 255.255.255.0

Step 3: configure static rout

[R1] ip route-static 192.168.4.0 255.255.255.0 192.168.2.2

[R2] ip route-static 192.168.1.0 255.255.255.0 192.168.2.1

Step 4: use ping to check whether the network is connected

*

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.