Shulou(Shulou.com)06/02 Report--

This article is about how to turn off bios post. The editor thinks it is very practical, so share it with you as a reference and follow the editor to have a look.

The way to turn off bios post: first of all, press Del to boot to the advanced BIOS settings page, and enter the advanced BIOS function or BIOS function settings; then find the "quick self-test power", set it to "enable", and press F10 to save and exit.

This article operating environment: Windows7 system, Dell G3 computer.

How to turn off bios post:

Method 1: set BIOS

1. Press Del to boot to the advanced BIOS settings page, and enter the advanced BIOS function or BIOS function settings.

2. Find the "Quick self-Test Power supply", set it to "enable", and press F10 to save and exit. Later, press Esc to skip the test directly.

Method 2: command method

3. Open the command prompt: start-all programs-attachments-command prompt and run the CMD command.

4. Enter the following command, Chkntfs/t:0 [set the waiting time for self-test to "0", of course, you can also customize the waiting time], Chkntfs/XC: [cancel the self-test on disk C after power up, of course, you can also set other partitions], and press enter to execute.

Thank you for reading! This is the end of the article on "how to turn off bios post". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, you can share it for more people to see!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.