Shulou(Shulou.com)06/02 Report--

Many people are asking how to repair Toshiba's hard drive. This trilogy will introduce you to three ways. First of all, the first article, a simple way to deal with simple problems. This method can destroy data, mostly for hard disk maintenance, if you want to do data recovery, please do not use this method. The main purpose of this method is to fix the hard disk with bad sectors and some simple hard disk problems.

The hard disk is connected to the DFL-SRP data recovery equipment hardware and connected to the computer to open the DFL control platform. Step 1: select DFL Toshiba maintenance Program > manage > reset Smart defect step 2:DFL hard disk scan > Click the Settings icon > General Settings > scan Type > fill in zeros (write zeros to the hard disk) for some simple logical bad sectors, the above methods can be easily solved. The second part adds the P table.

It is necessary to renovate and repair Toshiba hard drive and understand the maintenance method of the hard disk. We now use the dfl-srp USB3.0 Toshiba hard disk firmware repair tool to deal with the hard disk, by adding the P table to deal with the problem hard disk conveniently. Users need to connect the hard disk to dfl-srp hardware to open the Toshiba hard disk repair program, start the hard disk power, and set the scanning parameters. Choose to save the moderate, serious, super and error parts in the defect file. You can rename the file. After the hard disk is scanned, all the selected error damaged sector information is saved in the defect file. Users can view the parameter table, right-click in the plist window, import the saved defect file, and then click OK to add those defect records. Right-click the defects in the file in P-List and click Save Parameter Table, this action will put a list of properties for all these new defect records. The third article beheading and cutting Toshiba hard disk requires proper knowledge of hard disk maintenance. For new users, one thing is very important before dealing with the hard drive, that is, backup firmware module, backup ROM, which is the most necessary operation, the backup firmware can be collected as firmware resources to prepare for further hard disk repair or data recovery. In the case of the previous two methods do not work, the user can only cut off or behead to deal with the problem hard drive. Users can scan the hard drive, find the bad sector, write down the front bad sector LBA value, the middle bad sector, the last bad channel, the bad sector LBA, and compare to determine which head is damaged or which area is located in the bad channel. Users can go to the menu: firmware Operation > beheading / or chopping, which will list all areas. When a bad area is found, the user can select the area and right-click to cut the area. If the user wants to cut off the head, the user can right-click the area and click all areas on the same head, and then click start chopping area. After the area head is cut off, the hard disk leaves a good area head, and the user can usually fill in zero at this time.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.