Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, plotter maintenance training, plotter maintenance many people do not know, now let's take a look!

1. [guide] Today, with the popularity of modern offices, we can see all kinds of office supplies and related machines on our desks. We no longer have to write articles or materials by hand, but can use computers to operate them. This is especially true in painting. There are a lot of drawing software in modern office software, and we can finish the related work easily. It's easier to print. It is enough to output the paper with a plotter. Plotters are large plotters, but failures are common. Then the following editor will briefly introduce some minor problems and troubleshooting methods of plotter maintenance and hope to give you some reference.

2. As a large-scale drawing equipment, the plotter is different from the ordinary printer in that its parts are more precise and the machine operation is more accurate. Therefore, if the operation is not good or maintenance is not good, it is easy to have problems. Here are some common problems and how to troubleshoot them in detail.

3. the drawings for the maintenance of the plotter are incorrect.

4. Some friends will feel that some of the edges are oblique when outputting the paper with a plotter, and the whole picture is crooked after printing. But this is an irregular side tilt. This problem is mainly caused by the problem of supporting the guide pulley to handle the pop-up paper. Of course, there are other cases because of the problems of the paper itself. The surface of the paper is smooth, and this will happen when there is a film. Sometimes, it is not because the guide wheel is damaged, but because there is oil or dirt on the guide wheel, which leads to abnormal operation. We just need to clean the guide wheel.

5. The image quality of plotter maintenance is not clear.

6. There are many reasons for this. The first is that ink cartridges are broken or lack of ink. This is usually reflected in the computer. Regular replenishment of ink cartridges, coupled with cleaning and dredging ink cartridges, can change the status quo. Another reason is that there is a lot of dirt in the machine due to printing for a long time, resulting in unclear print quality. We need to clean the interior of the plotter regularly.

7. Plotter maintenance failed to start.

Sometimes when we turn on the machine, we find that the plotter is not working. This is because most large equipment needs to be preheated. Sometimes the preheating time is long, up to 10 minutes or even 20 minutes. Sometimes the warm-up time is very short, just a few minutes. These are normal, and the long time is due to low ambient temperature or procedural problems.

9. We have briefly introduced some simple problems and troubleshooting methods for the maintenance of plotters, and you need to pay attention to maintenance when you use them, so that some minor failures will not occur again.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.