Shulou(Shulou.com)06/01 Report--

Today, I will talk to you about how to install SUSE LINUX 10 on IBM X3650 M3 server. Many people may not know much about it. In order to make you understand better, the editor has summarized the following contents for you. I hope you can get something according to this article.

In the previous blog post about how to configure RAID on the IBM X3650 M3 server, now the installation of SUSE LINUX 10 on the IBM X3650 M3 server is also described in detail, so that it is a relatively complete process from hardware configuration to system installation.

The specific steps are as follows:

First, after configuring the RAID, put the SUSE LINUX 10 system CD to restart the server and press F12 to select the CD boot. After the installation interface appears, choose the Installation menu

Second, in the next interface, select "New installation"

Click next and select add to create additional logical volumes.

This step is to establish the VAR logical volume, assign the size to 5GB, mount the / VAR mount point, and note that the file system should be set to Reiser instead of EXT3 type, which is to facilitate the use of the resize_reiserfs command to resize the logical volume in the future.

The situation after the division is shown in the figure:

The size of the SWAP partition should be considered according to the specific situation: if the physical memory is less than 4Gheline swap, it can be set to 1-2 times of the actual physical memory; if it is greater than 4gigabyte swap, it can be set to be as large as the actual memory.

You can also refer to this method to calculate the size of SWAP (memory size + Swap partition size) * 80% or 70% = the total memory required by the program. If you are using a 2.4 kernel or 64-bit system, you can safely set the swap partition large enough that IBM makes it clear in its Linux 2.4 kernel documentation that 2.4.10 and later linux kernel supports a maximum of no more than 24GB per swap.

Fourth, software selection and system tasks, mainly according to the needs of development and deployment to select the corresponding components.

Finally, the installation is complete, and you can enter the system normally after reboot.

Note: copy this system for Autoyast can automatically generate an autoinst.xml file under ROOT. SUSE Linux can use this XML configuration file to control the installation of the operating system. By default, it installs the system with the same configuration every time you use AutoYaST. Autoyast can automate the installation of the operating system by using a set of configurations that are easy to maintain and modify.

After reading the above, do you have any further understanding of how to install SUSE LINUX 10 on the IBM X3650 M3 server? If you want to know more knowledge or related content, please follow the industry information channel, thank you for your support.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.