Shulou(Shulou.com)06/01 Report--

In Windows 7 configuration IPv6 need to pay attention to what, many novices are not very clear about this, in order to help you solve this problem, the following small series will explain in detail for everyone, there are people who need this can learn, I hope you can gain something.

IPv6 quietly came to our side, Windows 7 has begun to support IPv6, but for users, Windows 7 has not yet figured out, now plus an IPv6 is already very dizzy users more confused. Here's how to configure IPv6 in Windows 7.

First, the problem first appeared:

Because local school is advanced transition is brief in the future and updated oneself inside network address to IPv6, need to resolve IPv6 address to visit concerned website often so. However, recently I noticed that some of the school internal sites that could be logged in normally appeared inaccessible error tips, and experienced statistical awareness that these sites were equipped with IPv6 addresses.

Second, thinking about investigation and troubleshooting:

My own machine is a t400 laptop, and the device is a genuine Windows 7 ultimate operating system. In order to better locate the source of the problem, ask other machines, especially those equipped with xp system, to visit the above site and find that there is no problem. It seems that the root of the problem lies in the configuration of Windows 7.

(1)Configure IPv6 parameters from the menu:

Next, we will discuss the network search processing method, *** from IPv6 configuration, detailed steps are as follows.

*** Step: Right-click on the "Network" icon on the desktop to select properties to enter the network sharing center, click to enter the local connection.

Step 2: Configure the properties of local connection, find the internet protocol version 6(tcp/IPv6) option, double-click to open a new window to configure.

Step 3: Fill in the IPv6 parameter information in the local network according to the principle. Since sensitive information such as the network ip address segment is touched, it is not marked in detail here.

(2)Configure IPv6 parameters from the command:

After the end of the configuration problem as usual, the local computer still can not successfully access the internal network IPv6 site, other XP system computers do not exist in this question. Configuration is then performed again in a command-line fashion for IPv6 address information. The detailed steps are as follows.

*** Step: Enter cmd in Run, then right-click "Run as Administrator" at the command prompt, open the command line window and enter netsh to configure the network card parameters.

Step 2: Start our IPv6 configuration by typing the following commands in sequence.

netsh>int

netsh>interface>IPv6

netsh>interface>IPv6>isatap

netsh>interface>IPv6>isatap>set router xxxxxxx

(xxxxxx replaced with local network IPv6 routing address)

netsh>interface>IPv6>isatap>set state enabled

netsh>interface>IPv6>isatap>quit

(3)Configure IPv6 from Services:

After the end of the configuration, try to access the Internet again. The problem is still not handled. It seems that the two methods for IPv6 attribute correction are useless. After finding the correct host file on the web, copy the error as usual. It seems that the question is not out of the current IPv6 configuration, continue to look for answers to the questions from the system. At this time, I thought of the problem that the printer could not be shared due to closing the netshare service when using xp system before, so I had an idea to make a fuss about it from "service." Enter services.msc from the command prompt window to enter the "services" option window.

Comparing Windows 7 system and XP system services in sequence here is not the same, finally noticed that there is a service called ip helper, the resolution describes that the service plays an "IPv6 conversion technology, assuming that the service is suspended, the computer will not have the enhanced connection advantage provided by these technologies," and it happens that the corresponding ip helper service in Windows 7 system is not in the startup state, and the service is started and then visits those IPv6 education sites again without any doubt. Next, configure the service startup mode to be automatic, and restart the Windows 7 operating system to handle the problem Thursday.

III. Summary:

In Windows 7 operating system called ip helper service is responsible for IPv6 address analysis and access to the main, corresponding to the IPv6 helper service under the win xp system, assuming we do not use IPv6 network access to use the above services can be closed, assuming you want to use IPv6 network must be opened, this troubleshooting practice example is due to Windows 7 system ip helper service is illegal accident closed and the formation of IPv6 site access problems. I hope that you it168 readers can understand the new services in the Windows 7 operating system, and when you have questions, you can locate them at *** time.

Did reading the above help you? If you still want to have further understanding of related knowledge or read more related articles, please pay attention to the industry information channel, thank you for your support.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.