Shulou(Shulou.com)06/01 Report--

This article mainly introduces the meaning of all the error numbers of sql server. It is very detailed and has a certain reference value. Interested friends must finish reading it!

The 0 operation completed successfully.

1 function error.

2 the system could not find the specified file.

3 the system cannot find the specified path.

4 the system cannot open the file.

(5) deny access.

6 handle is invalid.

7 the storage control block is damaged.

8 there is not enough storage space to process this command.

9 the storage control block address is invalid.

10 environment error.

11 attempted to load a malformed program.

The 12 access code is invalid.

13 the data is invalid.

There is not enough memory to complete this operation.

15 the system cannot find the specified drive.

16 unable to delete the directory.

17 the system cannot move files to a different drive.

There are no more documents.

19 the media is write protected.

20 the system could not find the specified device.

21 the device is not ready.

22 the device does not recognize this command.

23 data error (cyclic redundancy check).

The 24 program issues a command, but the length of the command is incorrect.

The 25 drive cannot find the location of a specific area or track on the disk.

The specified disk or floppy disk cannot be accessed.

27 the drive could not find the requested sector.

The printer is out of paper.

29 the system cannot write to the specified device.

30 the system cannot read from the specified device.

31 the device connected to the system is not working.

The 32 process cannot access the file because another program is using the file.

The process cannot access the file because another program has locked part of the file.

36 there are too many open files to share.

38 reached the end of the file.

39 the disk is full.

50 does not support network requests.

51 the remote computer is not available.

52 there is a duplicate name on the network.

53 the network path was not found.

54 the network is busy.

55 the specified network resource or device is no longer available.

56 the network BIOS command limit has been reached.

57 there is a hardware error in the network adapter.

58 the specified server cannot run the requested operation.

59 an unexpected network error occurred.

60 the remote adapter is not compatible.

61 the printer queue is full.

62 the space for saving the file to be printed is not available on the server.

Delete files waiting to be printed.

64 the specified network name is no longer available.

65 deny network access.

66 the network resource type is wrong.

67 the network name was not found.

68 exceeds the name limit of the local computer network card.

69 exceeds the network BIOS session limit.

70 the remote server has been paused or is in the process of starting.

71 it is no longer possible to connect to this remote computer because the limit of the number of connections to the computer has been reached.

72 the specified printer or disk device has been suspended.

80 the file exists.

82 unable to create directory or file.

83 INT 24 failed.

84 unable to get the storage space to process this request.

85 Local device name is already in use.

86 the specified network password is incorrect.

87 parameter error.

A write error occurred on the 88 network.

89 the system cannot start another process at this time.

100 unable to create another system semaphore.

101 another process has an exclusive semaphore.

102 the semaphore is set and cannot be turned off.

103 the semaphore can no longer be set.

104 cannot request an exclusive semaphore in case of an interrupt.

105 the previous ownership of this semaphore has ended.

The 107 program stopped because the replacement floppy disk was not inserted.

108 the disk is in use or is locked by another process.

The 109 pipe is over.

The 110 system cannot open the specified device or file.

111 the file name is too long.

112 insufficient disk space.

113 the identity of the internal file can no longer be obtained.

114 the identity of the target internal file is incorrect.

The IOCTL call made by the application program is incorrect.

118 verify that the value of the written switch parameter is incorrect.

119 the system does not support the requested command.

120 this feature is only supported by this system.

121 semaphore timeout has expired.

122 the data area passed to the system call is too small.

123 the file name, directory name, or volume label syntax is incorrect.

124 system call level error.

125 disk does not have a volume label.

126 the specified module was not found.

127 the specified program was not found.

128 there are no waiting child processes.

130 attempted to use the file handle of the open disk partition of the operation (instead of the original disk Icano).

131 attempts to move the file pointer before the beginning of the file.

132 unable to set the file pointer on the specified device or file.

Drives that contain previously added drives cannot use the JOIN or SUBST commands.

An attempt was made to use the JOIN or SUBST command on a merged drive.

An attempt was made to use the JOIN or SUBST command on a merged drive.

The system attempted to remove the JOIN from the unmerged drive.

The system attempted to remove the SUBST from the drive that has not been replaced.

138 the system attempted to merge the drive into a directory on the merged drive.

139 the system attempted to replace the drive with a directory on the replacement drive.

140 the system attempted to merge the drive into a directory on the replacement drive.

141 the system attempted to replace the drive with a directory on the merged drive.

The system cannot run JOIN or SUBST at this time.

143 the system cannot merge or replace the drive with a directory on the same drive.

The 144 directory is not a subdirectory under the root directory.

The 145 directory is not empty.

146 the specified path is already used in the override.

147 insufficient resources to process this command.

148 the specified path cannot be used at this time.

149 attempts to merge or replace the drive with a drive where the directory on the drive is the last alternative target.

150 system tracking information is not specified in the CONFIG.SYS file, or tracking is not allowed.

The number of semaphore events specified for DosMuxSemWait is incorrect.

152 DosMuxSemWait is not runnable. Too many semaphores have been set.

153The DosMuxSemWait list is incorrect.

154 the volume label entered exceeds the length limit of the destination file system

155 cannot create another thread.

156 the receiving process has rejected this signal.

Paragraph 157 has been abandoned and cannot be locked.

Paragraph 158 has been unlocked.

159 the address identified by the thread is incorrect.

The parameter string passed to DosExecPgm is incorrect.

161 the specified path is invalid.

Signal 162 has been paused.

164 unable to create more threads in the system.

167 unable to lock the file area.

170 the requested resource is in use.

173 the request to provide a cancellation area for locking is not obvious.

174 the file system does not support minimum unit changes of the lock type.

The 180 system detected the wrong segment number.

183 cannot create a file when it already exists.

186 passed the wrong flag.

187 the specified system semaphore name was not found.

The 196 operating system cannot run this application.

The current configuration of the 197 operating system cannot run this application.

The 199 operating system cannot run this application.

200 code snippets cannot be greater than or equal to 64K.

The 203 operating system cannot find the environment option that has been entered.

The processes in the 205 command subtree do not have signal handlers.

206 the file name or extension is too long.

207 the 2nd ring stack is already occupied.

208 did not enter the filename wildcard character * or? correctly, or specified too many filename wildcards.

209 is sending the wrong signal.

210 unable to set the signal handler.

Paragraph 212 is locked and cannot be reassigned.

214 there are too many dynamic link modules connected to the program or dynamic link module.

Cannot nest calls to LoadModule.

230 the pipeline status is invalid.

231 all pipeline instances are in use.

Pipeline 232 is shutting down.

There are no processes on the other end of the 233 pipe.

234 more data is available.

240 cancel the session.

254 the extended property name specified is invalid.

255 extended properties are inconsistent.

258 the waiting operation is out of date.

259 there is no data available.

266 cannot use the replication feature.

The 267 directory name is invalid.

275 the extended property does not apply in the buffer.

276 the extended properties file installed on the file system is corrupted.

277 the extended property sheet file is full.

278 the extended property handle specified is invalid.

282 mounted file systems do not support extended attributes.

288 attempts to release a multi-user terminal running program that is not owned by the caller.

298 too many requests to semaphores.

Only part of the ReadProcessMemoty or WriteProcessMemory request is completed.

300 the operation lock request was denied.

The 301 system received an invalid operation lock confirmation.

487 attempted to access an invalid address.

534 the arithmetic result is more than 32 bits.

There is a process at the other end of the 535 pipeline.

536 waits for the process of opening the other end of the pipe.

994 denies access to extended properties.

995 the Iripple O operation has been abandoned due to thread exit or application request.

The 996 overlapping Imax O event is not in the signal state.

997 overlapping Icando O operation is in progress.

998 memory allocation access is invalid.

999 error running on-page operation.

1001 Recursion is too deep; stack overflow.

1002 window cannot operate on a message that has been sent.

1003 cannot complete this function.

1004 invalid flag.

1005 this volume does not contain a recognized file system. Make sure that all requested file system drivers are loaded and that the volume is not corrupted.

1006 the volume on which the file resides has been externally changed, so the open file is no longer valid.

1007 cannot run the requested operation in full screen mode.

1008 attempts to reference a token that does not exist.

1009 the configuration registry database is corrupt.

1010 the configuration registry key is invalid.

1011 unable to open the configuration registry key.

1012 unable to read the configuration registry key.

1013 unable to write to the configuration registry key.

1014 A file in the registry database must be restored using records or alternative replication. The restore completed successfully.

1015 the registry is damaged. A file structure that contains registry data is corrupted, or the system's file memory image is corrupted, or the file cannot be recovered due to replacement copies, missing or corrupted logs.

1016 the recovery of the Ithumb O operation initiated by the registry failed. The registry cannot read in, write out, or clear any file that contains the registry system image.

1017 the system attempted to load or restore a file to the registry, but the specified file is not in the registry file format.

1018 attempted to run an illegal operation on a registry key marked for deletion.

1019 the system cannot configure the requested space in the registry log.

1020 cannot create a symbolic link in a registry key that already has a subkey or value.

1021 cannot create a stable child under a volatile parent.

1022 notifies that the change request is being completed and that the information has not been returned to the caller's buffer. The current caller must enumerate the files to find the changes.

1051 stop control has been sent to the service, which is dependent on other running services.

1052 the requested control is not valid for this service

1053 the service did not respond to startup or control requests in a timely manner.

1054 unable to create a thread for this service.

1055 Lock the service database.

An instance of the 1056 service is already running.

1057 the account name is invalid or does not exist, or the password is not valid for the specified account name.

1058 cannot start the service, possibly because it is disabled or the device associated with it is not started.

1059 specifies circular service dependencies.

1060 the specified service does not exist as an installed service.

The 1061 service cannot accept control information at this time.

1062 the service is not started.

1063 the service process could not connect to the service controller.

1064 an exception occurred in the service when a control request was processed.

1065 the specified database does not exist.

1066 the service has returned a specific service error code.

1067 the process terminated unexpectedly.

1068 dependent services or groups cannot be started.

1069 the service could not be started due to a login failure.

1070 after startup, the service stays in the startup paused state.

1071 the service database lock specified is invalid.

1072 the specified service has been marked for deletion.

1073 the specified service already exists.

1074 the system is currently running with the latest valid configuration.

1075 the dependent service does not exist or has been marked for deletion.

1076 has accepted the use of the current boot as the last valid control setting.

1077 there has been no attempt to boot the service since it was last started.

1078 the name has been used as the service name or service display name.

1079 the account for this service is different from that of other services running on the same process.

1080 failed operations can only be set for Win32 services, not for drivers.

1081 this service runs the same processing as the service control manager. Therefore, if the service handler aborts unexpectedly, the service control manager cannot do anything.

1082 the recovery program has not been set up for this service.

1083 the service that is configured to run in the executable cannot execute the service.

1100 has reached the actual end of the tape.

1101 Tape access has reached the file mark.

1102 has reached the beginning of the tape or disk partition.

1103 Tape access has reached the end of a set of files.

1104 there is no more data on the tape.

1105 the tape cannot be partitioned.

1106 the current block size is incorrect when accessing a new tape with a multi-volume partition.

1107 Partition information was not found when the tape was loaded.

1108 unable to lock the media eject feature.

1109 unable to uninstall the media.

The media in the 1110 drive may have changed.

1111 resets the Icano bus.

There is no media in the 1112 drive.

1113 in a multibyte target code page, there are no characters to which this Unicode character can be mapped.

1114 the dynamic link library (DLL) initialization routine failed.

1115 system shutdown is in progress.

1116 the system shutdown cannot be interrupted because there is no ongoing shutdown process.

1117 this request could not be run because of an error in the Icano device.

1118 none of the serial devices were initialized successfully. The serial driver will be uninstalled.

1119 cannot open a device that is sharing an interrupt request (IRQ) with other devices. At least one other device using the IRQ is turned on.

The 1120 sequence I _ big O operation has been completed by writing to another serial port. (IOCTL_SERIAL_XOFF_COUNTER has reached zero.)

1121 because the timeout period has elapsed, the serial Igamot O operation is completed. (IOCTL_SERIAL_XOFF_COUNTER does not reach zero.)

1122 the ID address tag was not found on the floppy disk.

1123 the floppy sector ID character field does not match the floppy disk controller track address.

1124 the floppy disk controller reports an error that is not recognized by the floppy disk driver.

1125 the floppy disk controller returns a result that is inconsistent with its register.

1126 when accessing the hard drive, the recalibration operation failed and the retry still failed.

1127 when accessing the hard disk, the disk operation failed and the retry still failed.

1128 when accessing the hard disk, the disk controller must be reset even if it fails.

1129 has reached the end of the tape.

1130 there is not enough storage space on the server to process this command.

1131 potential deadlock status detected.

1132 the specified base address or file offset is not properly aligned.

1140 attempts to change the power state of the system are rejected by another application or driver.

1141 the attempt by the system BIOS to change the power supply state of the system failed.

1142 attempts to create more links on a file than the system allows.

1150 specifies the version of Windows that the program requires to be updated.

1151 the specified program is not a Windows or MS-DOS program.

1152 only one instance of the specified program can be started.

1153 this designated program applies to older versions of Windows.

1154 one of the library files required to execute the application is corrupted.

1155 No application is associated with the specified file for this operation.

1156 an error occurred while delivering instructions to the application.

1157 one of the library files required to execute the application could not be found.

1158 the current program has used all the handles allowed by the system for the Window Manager object.

1159 messages can only be used with synchronization operations.

1160 indicates that the source element has no media.

1161 indicates that the target element already contains media.

1162 the element indicated does not exist.

1163 indicates that the element is part of an undisplayed storage resource.

1164 the display device needs to be reinitialized because of a hardware error.

1165 the device indicates that it needs to be cleared before attempting further operations.

The 1166 device shows that its door is still open.

1167 the device is not connected.

1168 element not found.

1169 there are no items in the index that match the specified item.

1170 the specified property set does not exist on the object.

1171 the point passed to GetMouseMovePoints is not in the buffer.

1172 the tracking (workstation) service is not running.

1173 Volume ID not found.

1175 cannot delete the file to be replaced.

1176 cannot move the replacement file to the file to be replaced. The file to be replaced remains the original name.

1177 cannot move the replacement file to the file to be replaced. The file to be replaced has been renamed to the backup name.

The 1178 volume change record was deleted.

The 1179 volume change logging service is not active.

1180 A document was found, but it may not be the correct one.

1181 the log entry is deleted from the log.

1200 the specified device name is invalid.

1201 the device is not currently connected, but it is a record connection.

1202 an attempt is made to record equipment that has been previously recorded.

1203 No network provider accepts the specified network path.

1204 the specified network provider name is invalid.

1205 unable to open the network connection profile.

1206 the network connection profile is corrupted.

1207 unable to enumerate empty vectors.

An extension error occurred in 1208.

1209 the specified group name format is invalid.

1210 the specified computer name format is invalid.

1211 the specified event name format is invalid.

1212 the specified domain name format is invalid.

1213 the specified service name format is invalid.

1214 the specified network name format is invalid.

1215 the specified share name format is invalid.

1216 the specified password format is invalid.

1217 the specified message name format is invalid.

1218 the message destination format specified is invalid.

1219 the credentials provided conflict with an existing credential set.

1220 attempted to create a session for a network server, but too many sessions have been created for that server.

1221 the workgroup or domain name is already in use by another computer on the network.

1222 the network is not connected or started.

1223 the operation has been cancelled by the user.

1224 the requested operation cannot be performed on a file opened using the user mapping area.

1225 the remote system rejects the network connection.

1226 the network connection has been properly closed.

1227 the network transport endpoint already has an address associated with it.

The 1228 address is still not associated with the network endpoint.

1229 attempts to operate on a network connection that does not exist.

1230 attempts to perform an invalid operation on a network connection in use.

1231 cannot access the network location. For information about network troubleshooting, see Windows help.

1232 cannot access the network location. For information about network troubleshooting, see Windows help.

1233 cannot access the network location. For information about network troubleshooting, see Windows help.

1234 No service is operating on the target network endpoint on the remote system.

1235 the request was terminated.

1236 the network connection is terminated by the local system.

1237 the operation could not be completed. We should try again.

1238 cannot connect to the server because the maximum number of simultaneous connections for this account has been reached.

1239 attempts to log in within a time when this account is not authorized.

1240 this account is not authorized to log in from this workstation.

1241 the requested operation cannot use this network address.

1242 the server is already registered.

1243 the specified service does not exist.

1244 the requested operation cannot be performed because the user has not been authenticated.

1245 because the user has not logged in to the network, the required operation cannot be performed. The specified service does not exist.

1246 is continuing to work.

1247 attempted to perform the initial operation, but the initialization was completed.

1248 there are no more local devices.

1249 the specified site does not exist.

1250 A domain controller with the specified name already exists.

1251 this operation is supported only when connected to the server.

1252 even if there are no changes, the Group Policy Framework should invoke the extension.

1253 the specified user does not have a valid profile.

1254 Microsoft Small Business Server does not support this operation.

1300 not all referenced privileges are assigned to callers.

1301 some mapping between the account name and the security identity is not completed.

1302 there is no system quota limit specifically set for this account.

1303 No encryption keys are available. A known encryption key is returned.

The 1304 password is too complex to be converted to a LAN Manager password. The returned LAN Manager password is an empty string.

1305 the revision level is unknown.

1306 indicates that the two revision levels are incompatible.

1307 this security identity cannot be assigned to the owner of this object.

1308 this security identity cannot be assigned as the primary group of the object.

1309 currently does not impersonate the customer's thread trying to manipulate the impersonation token.

1310 groups may not be disabled.

1311 there is currently no login server available to service login requests.

1312 the specified login session does not exist. May have been terminated.

1313 the specified privilege does not exist.

1314 customers do not have the required privileges.

1315 the name provided is not in the correct form of account name.

1316 the specified user already exists.

1317 the specified user does not exist.

1318 the specified group already exists.

1319 the specified group does not exist.

1320 the specified user account is already a member of the specified group, or the specified group cannot be deleted because the group contains members.

1321 the specified user account is not a member of the specified group account.

1322 cannot disable or delete the last remaining system management account.

1323 unable to update password. The value provided as the current password is incorrect.

1324 unable to update password. The value provided to the new password contains values that are not allowed in the password.

1325 unable to update password. The value provided for the new password does not meet the length, complexity, or historical requirements of the character field.

1326 login failed: unknown user name or wrong password.

1327 login failure: user account restrictions.

1328 login failure: violation of account login time limit.

1329 login failed: users are not allowed to log on to this computer.

1330 login failed: the specified account password has expired.

1331 login failed: disable the current account.

1332 there is no mapping between the account name and the security identity.

1333 too many local user identifiers (LUIDs) are requested at a time.

1334 there are no more local user identifiers (LUIDs) available.

1335 for this particular use, the secondary authorization portion of the secure ID is invalid.

1336 the access control list (ACL) structure is invalid.

1337 the secure ID structure is invalid.

1338 the security descriptor structure is invalid.

1340 unable to create an inherent access control list (ACL) or access control project (ACE).

1341 the server is currently disabled.

1342 the server is currently enabled.

1343 the value provided to the identification code authority is invalid.

1344 there is no more memory available to update security information.

1345 the specified property is invalid or incompatible with the properties of the entire group.

1346 the specified impersonation level is invalid, or the provided impersonation level is invalid.

1347 unable to open anonymous level security token.

1348 the requested authentication information category is invalid.

The type of 1349 token is not appropriate for the method it is trying to use.

1350 cannot run security operations on objects that are not associated with security.

1351 failed to read configuration information from the domain controller, either because the machine is not available, or access is denied.

1352 Security account Manager (SAM) or Local Security Authority (LSA) server is in an error state of running security operations.

The 1353 domain is in an error state of running a security operation.

1354 this operation is only feasible for the primary domain controller of the domain.

1355 the specified domain does not exist or cannot be contacted.

1356 the specified domain already exists.

1357 attempts to exceed the limit of the number of domains per server.

1358 cannot complete the requested operation because of a critical media failure or data structure corruption on the disk.

An internal error occurred in 1359.

1360 Universal access types are contained in access masks that have been mapped to non-generic types.

1361 the security descriptor is not in the correct format (absolute or self-related).

1362 request operations are restricted to use during the login process. The calling process is not registered as a login process.

1363 cannot start a new session with an identity that is already in use.

1364 unknown specified authentication packet.

1365 the login session is not in a state consistent with the requested operation.

1366 the login session identity is already in use.

1367 the login request contains an invalid login type value.

1368 until data is read using a named pipe, it cannot be simulated through that pipe.

1369 the transaction state of the registry subtree is inconsistent with the request state.

1370 there is corruption inside the security database.

1371 cannot run this operation on the built-in account.

1372 cannot run this operation on built-in special groups.

1373 cannot run this operation on built-in special users.

1374 cannot remove a user from a group because the current group is the user's primary group.

The 1375 token has been used as the primary token.

1376 the specified local group does not exist.

1377 the specified account name is not a member of the local group.

1378 the specified account name is already a member of the local group.

1379 the specified local group already exists.

1380 login failed: the user was not granted the requested login type on this computer.

1381 has exceeded the maximum number of secrets that can be kept in a single system.

1382 the length of the secret exceeds the maximum length allowed.

1383 the local security authority database contains inconsistencies.

1384 in the process of trying to log in, the user's security context accumulated too many security identities.

1385 login failed: the user was not granted the requested login type on this computer.

1386 Cross-encrypted passwords are required when changing a user's password.

1387 members cannot be added to or removed from the local group because they do not exist.

1388 A new member cannot be added to the local group because the member has the wrong account type.

1389 too many security identifiers have been specified.

1390 A cross-encrypted password is required to change this user's password.

1391 indicates that the ACL does not contain any inheritable components.

1392 the file or directory is corrupted and cannot be read.

1393 the disk structure is corrupted and cannot be read.

1394 there are no user session entries for the specified login session.

1395 the service being accessed has a target authorization limit on the number of connections. At this time, it is no longer possible to connect because the maximum number of acceptable connections has been reached.

1396 login failed: the target account name is incorrect.

1397 Mutual authentication failed. The server's password on the domain controller expires.

1398 there is a time difference between client and server.

1400 invalid window handle.

1401 invalid menu handle.

1402 invalid cursor handle.

1403 invalid accelerator table handle.

1404 invalid hook handle.

1405 invalid multiple window position structure handle.

1406 unable to create the uppermost child window.

1407 window category not found.

1408 invalid window; it belongs to another thread.

1409 hotkeys are registered.

1410 category already exists.

1411 Category does not exist.

Category 1412 still has windows open.

1413 invalid index.

1414 invalid icon handle.

1415 use dedicated DIALOG window words.

1416 the list box identity was not found.

1417 No wildcard characters were found.

The 1418 thread does not have an open clipboard.

1419 there are no hotkeys registered.

1420 window is not a legitimate conversation window.

1421 the control ID was not found.

1422 the message for the combo box is invalid because there is no editing control.

1423 window is not a combo box.

Height 1424 must be less than 256h.

1425 invalid device context (DC) handle.

1426 invalid connector type.

1427 invalid hook program.

1428 cannot set a non-native hook without a module handle.

1429 this connector can only be set as a whole.

1430 the Journal Hook program has been installed.

1431 the hook program has not been installed.

1432 invalid message for a single select list box.

1433 LB_SETCOUNT is sent to a non-passive list box.

1434 Tab key width is not supported in this list box.

1435 cannot destroy an object created by another thread.

1436 there is no menu in the child window.

1437 window does not have a system menu.

1438 invalid message dialog style.

1439 invalid system-wide (SPI_*) parameters.

1440 the screen is locked.

1441 all handles to windows in a multiple window location structure must have the same upper layer.

1442 window is not a child window.

1443 invalid GW_* command.

1444 invalid thread identity.

1445 cannot process messages in non-multiple document interface (MDI) windows.

1446 the pop-up menu has been activated.

The 1447 window does not have a scroll bar.

1448 the scroll bar range cannot be greater than MAXLONG.

1449 the window cannot be displayed or deleted in the specified manner.

1450 there are insufficient system resources to complete the requested service.

1451 there are insufficient system resources to complete the requested service.

1452 there are insufficient system resources to complete the requested service.

1453 the quota is insufficient to complete the requested service.

1454 the quota is insufficient to complete the requested service.

The 1455 page file is too small to complete the operation.

1456 No menu items were found.

1457 the keyboard layout handle is invalid.

1458 hook types are not allowed.

1459 this operation requires an interactive window workstation.

1460 because the timeout has expired, the operation returns.

1461 invalid monitor handle.

1500 the event log file is corrupt.

1501 unable to open the event log file, the event log service was not started.

1502 the event log file is full.

1503 the event log file has been changed between reads.

1601 cannot access the Windows installation service. Please contact your technical support staff to confirm that the Windows installation service is registered correctly.

1602 users cancelled the installation.

1603 A serious error occurred during installation

1604 installation has been suspended and is not complete.

1605 this operation is only valid for currently installed products.

1606 feature ID is not registered.

1607 component ID is not registered.

1608 unknown properties.

The 1609 handle is in an incorrect state.

1610 the configuration data for this product is corrupted. Please contact the technical support staff.

1611 component qualifier does not exist.

1612 the installation source for this product is not available. Please verify that the source exists and can be accessed.

1613 the Windows installation service was unable to install this installation package. You must install Windows Service Park with a new version of the Windows installation service.

1614 the product is not uninstalled.

1615 SQL query syntax is incorrect or not supported.

1616 the record character field does not exist.

1617 the device has been deleted.

1618 another installation operation is in progress. Please complete that operation before continuing with this installation operation.

1619 failed to open this installation package. Verify that the package exists and is accessible, or contact the application vendor to verify that this is a valid Windows installation service package.

1620 failed to open this installation package. Contact the application vendor to verify that this is a valid Windows installation service package.

1621 there was an error starting the user interface of the Windows installation service. Please contact the technical support staff.

1622 error opening installation log file. Verify that the specified log file location exists and can be written.

1623 the language of the installation package is not supported by the system.

1624 errors in applying transformations. Verify that the specified transformation path is valid.

1625 system policy prohibits this installation. Please contact your system administrator.

1626 unable to execute the function.

1627 there was a problem with the function during execution.

1628 an invalid or unknown form was specified.

1629 the data type provided is not correct.

1630 this type of data is not supported.

1631 the Windows installation service failed to start. Please contact the technical support staff.

1632 the temporary folder is full or cannot be used. Please verify that the temporary folder exists and can be written to.

1633 this processor type does not support this installation package. Please contact the product supplier.

1634 components are not used on this computer.

1635 unable to open the patch package. Verify that the patch package exists and is accessible, or contact the application vendor to verify that this is a patch package for the Windows installation service.

1636 unable to open the patch package. Contact the application vendor to verify that this is a patch package for the Windows installation service.

The 1637 Windows installation service cannot process this plug-in package. You must install Windows Service Pack with a new version of the Windows installation service.

1638 another version of this product has been installed. The installation of this version cannot continue. To configure or remove an existing version of this product, use add / remove programs on the Control Panel.

1639 invalid command line argument. For detailed command line help, refer to the SDK of the Windows installation service.

1640 during a Terminal Services remote session, only the administrator has permission to add, remove, or configure server software. If you want to install or configure software on the server, contact your network administrator.

1641 the required operation has been completed successfully. For the changes to take effect, the system must be restarted.

1642 the Windows setup Service cannot install the upgrade patch because the program being upgraded may be lost or the upgrade patch may update a different version of the program. Make sure that the program to be upgraded is on your computer and that your upgrade patch is correct.

1700 string binding is invalid.

1701 the binding handle type is incorrect.

1702 the binding handle is invalid.

1703 does not support RPC protocol sequences.

1704 RPC protocol sequence is invalid.

1705 the string universal unique identifier (UUID) is invalid.

1706 the endpoint format is invalid.

1707 the network address is invalid.

1708 the endpoint was not found.

The 1709 timeout value is not valid.

1710 No object universal unique identifier (UUID) was found.

1711 the object Universal unique ID (UUID) has been registered.

1712 the type universal unique identifier (UUID) is registered.

1713 the RPC server is already listening.

1714 No protocol sequence is registered.

1715 the RPC server is not listening.

1716 unknown manager type.

1717 unknown interface.

1718 does not have any links.

1719 there is no agreement order.

1720 unable to create endpoint.

1721 there are insufficient resources to complete this operation.

1722 the RPC server is not available.

1723 the RPC server is too busy to complete this operation.

1724 the network option is not valid.

1725 there are no remote procedure calls in use in this thread.

1726 remote procedure call failed.

1727 the remote procedure call failed and did not run.

1728 remote procedure call (RPC) protocol error.

1730 RPC server does not support transport syntax.

1732 the universal unique identification (UUID) type is not supported.

1733 the tag is not valid.

1734 the array boundary is invalid.

The 1735 link does not contain the project name.

1736 the name syntax is invalid.

1737 does not support name syntax.

1739 there is no network address that can be used to create a universal unique identification (UUID).

The 1740 endpoint is a backup.

1741 unknown authentication type.

1742 the maximum number of calls is too small.

The 1743 string is too long.

1744 No RPC protocol sequence was found.

1745 process number is out of range.

The 1746 binding does not contain any authentication information.

1747 unknown authentication service.

1748 unknown authentication level.

1749 the security context is invalid.

1750 unknown authorization service.

1751 the project is invalid.

1752 the server endpoint cannot run the operation.

1753 there are no more endpoints available in the endpoint mapping table.

1754 No interfaces are exported.

1755 the project name is incomplete.

The version 1756 option is not valid.

1757 there are no other members.

1758 there is no content unexported.

Interface 1759 was not found.

1760 Project already exists.

1761 the project was not found.

1762 there are no name services available.

1763 the network address family is invalid.

1764 the requested operation is not supported.

1765 there is no security context available to allow impersonation.

1766 an internal error occurred in the remote procedure call (RPC).

1767 the RPC server attempted to divide the integer by zero.

An address error occurred in the 1768 RPC server.

Floating-point operations on 1769 RPC servers lead to divisor by zero.

1770 floating point underflow occurred on the RPC server.

A floating point overflow occurred on the 1771 RPC server.

1772 the list of available RPC servers bound by automatic handles has been used up.

1773 unable to open character translation table file.

1774 the number of files containing character translation tables is less than 512 bytes.

1775 during a remote procedure call, an empty context handle is passed from the client to the host.

1777 during a remote procedure call, the context handle has changed.

1778 the binding handle passed to the remote procedure call does not match.

1779 the receiver cannot get the remote procedure call handle.

1780 passes a null reference pointer to the receiver.

1781 the enumerated value is out of range.

The 1782 byte count is too small.

1783 the receiver received bad data.

1784 the user buffer provided for the requested operation is invalid.

1785 the disk media is not recognized. May not be formatted.

1786 workstations do not have trust secrets.

The security database on the 1787 server does not have a computer account for this workstation trust relationship.

1788 the trust relationship between the primary domain and trusted domain failed.

1789 the trust relationship between this workstation and the primary domain failed.

1790 Network login failed.

1791 remote procedure calls for this thread are already in progress.

1792 attempted to log in, but the network login service did not start.

1793 user account expires.

1794 the forwarder is occupied and cannot be uninstalled.

1795 the specified printer driver is already installed.

1796 the specified port is unknown.

1797 unknown printer driver.

1798 unknown printer processor.

1799 the specified delimited page file is invalid.

1800 the priority specified is invalid.

1801 the printer name is not valid.

The 1802 printer already exists.

The 1803 printer command is not valid.

1804 the specified data type is invalid.

1805 the specified environment is invalid.

1806 No more bindings.

1807 the account used is an inter-domain trust account. Please use your global or local user account to access this server.

1808 the account used is a computer account. Use your global or local user account to access this server.

1809 the account used is the server trust account. Use your global or local user account to access this server.

1810 the name or security identity (SID) of the specified domain is inconsistent with the trust information for that domain.

1811 the server is in use and cannot be uninstalled.

1812 the specified image file does not contain a resource area.

1813 the resource type specified in the image file was not found.

1814 the resource name specified in the image file could not be found.

1815 the resource language identity specified in the image file was not found.

The 1816 quota is insufficient to process this command.

1817 No interface is registered.

1818 the remote procedure call was cancelled.

1819 the binding handle does not contain all the required information.

1820 Communication failed during a remote procedure call.

1821 the requested authentication level is not supported.

1822 No principal names are registered.

1823 the specified error is not a valid Windows RPC error code.

1824 A UUID that is valid only on this computer has been configured.

1825 an error specific to the security package occurred.

1826 the thread was not cancelled.

1827 invalid encode / decode handle operation.

1828 the version of the serialization wrapper is not compatible.

1829 the version of the RPC receiver is not compatible.

1830 the RPC pipe object is invalid or corrupted.

1831 attempted to perform an invalid operation on the RPC pipe object.

1832 unsupported RPC pipe version.

1898 No members of the group were found.

1899 unable to create endpoint mapping table database entry.

1900 the universal unique identity (UUID) of the object is nil UUID.

1901 the specified time is invalid.

1902 the format name specified is invalid.

1903 the format size specified is invalid.

1904 the specified printer handle is waiting in the

1905 the specified printer has been deleted.

The status of the 1906 printer is invalid.

1907 before logging in for the first time, the user password must be changed.

1908 the domain controller for this domain could not be found.

The account referenced by 1909 is currently locked and may not be able to log in.

1910 No specified exporter for this object was found

1911 No specified object was found.

1912 No specified object parser was found.

1913 some pending data remains in the request buffer.

1914 invalid asynchronous remote procedure call handle.

1915 the asynchronous RPC call handle for this operation is incorrect.

1916 the RPC pipe object has been closed.

1917 all pipes are processed before the RPC call is completed.

1918 there is no other available data from the RPC pipeline.

1919 there is no station roll call available for this machine.

1920 the system cannot access this file.

1921 the file name is not recognized by the system.

1922 the project is not the desired type.

1923 cannot export the UUID of all objects to the specified item.

1924 cannot export the interface to the specified item.

1925 unable to add the specified profile entry.

1926 unable to add the specified profile element.

1927 the specified profile element cannot be deleted.

1928 unable to add group elements.

1929 unable to delete group elements.

2000 invalid pixel format.

2001 the specified driver is invalid.

2002 window style or category properties are not valid for this operation.

2003 the requested entity operation is not supported.

2004 the requested transformation operation is not supported.

2005 the requested cut operation is not supported.

2010 the specified color management module is invalid.

2011 the color file configuration is invalid.

2012 the specified identity was not found.

2013 the required identity could not be found.

2014 the specified identity already exists.

2015 the specified color file configuration is not relevant to any device.

2016 the specified color file configuration could not be found

2017 the specified color space is invalid.

2018 Image color management is not started.

2019 there was an error while deleting the color transfer.

2020 the specified color transfer is invalid.

2021 the specified transformation does not match the color space of the bitmap.

2022 the specified named color index does not exist in the profile.

2102 there are no workstation drivers installed.

2103 unable to locate the server.

2104 an internal error occurred and the network could not access the shared memory segment.

2105 insufficient network resources.

2106 workstations do not support this operation.

2107 the device is not connected.

2108 the network connection was successful, but the user needs to be prompted for a password that is different from that originally specified.

2114 the server service is not started.

2115 queue is empty.

2116 the device or directory does not exist.

2117 cannot perform this operation on redirected resources.

2118 the name has been shared.

2119 the server is currently unable to provide the required resources.

2121 the number of additional items required exceeds the allowable limit.

2122 Peer-to-Peer service only supports two users operating at the same time.

2123 the API return buffer is too small.

2127 remote API error.

2131 error opening or reading configuration file.

2136 A general network error occurred.

2137 the status of the workstation service is inconsistent. Restart your computer before restarting the workstation service.

The 2138 workstation service did not start.

2139 the required information is not available.

An Windows 2000 internal error occurred in 2140.

2141 the server does not set up transaction processing.

2142 the requested API is not supported by the remote server.

2143 the event name is invalid.

This computer name already exists on the 2144 network. Please change your name and restart.

2146 the specified component was not found in the configuration information.

2147 the specified parameter was not found in the configuration information.

2149 one of the command lines in the configuration file is too long.

The 2150 printer does not exist.

2151 the print job does not exist.

The 2152 printer target cannot be found.

The 2153 printer destination already exists.

The 2154 printer queue already exists.

2155 cannot add another printer.

2156 cannot add other print jobs.

2157 cannot add another printer target.

2158 this printer target is idle and does not accept control operations.

2159 this Printer Target request contains invalid control functions.

2160 the print processor is not responding.

2161 the daemon is not running.

2162 print the current condition of the target and cannot perform this operation.

This operation cannot be performed because of the current condition of the 2163 printer queue.

2164 the current condition of the print job, this operation cannot be performed.

2165 unable to allocate memory for background processors.

2166 the device driver does not exist.

This data type is not supported by the 2167 print processor.

2168 there is no print processor installed.

2180 Lock the service database.

The 2181 service list is full.

2182 the requested service has been started.

2183 this service does not respond to control operations.

2184 the service is still not started.

2185 the service name is invalid.

The 2186 service has no response control function.

2187 Service control is busy.

The 2188 profile contains an invalid service program name.

2189 cannot control the service in the current situation.

2190 Service terminated abnormally.

2191 this service cannot accept the requested "pause" or "stop" operation.

2192 Service Control Scheduler cannot find the service name in the schedule.

2193 unable to read the service control scheduler pipeline.

2194 unable to create a thread for the new service.

2200 this workstation has logged in to the LAN.

2202 the specified user name is invalid.

2203 the password parameter is invalid.

The 2204 login processor did not add a message alias.

The 2205 login processor did not add a message alias.

2206 the logout processor did not delete the message alias.

2207 the logout processor did not delete the message alias.

2209 suspend network login.

2210 there is a conflict in the central login server.

2211 the server did not set the correct user path.

2212 an error occurred while loading or running the login script.

2214 No login server is specified, and the login status of the computer is standalone.

2215 login server cannot be found.

2216 this computer already has a login domain.

2217 the login server was unable to verify the login.

2219 the security database cannot be found.

The 2220 group name cannot be found.

2221 user name cannot be found.

2222 the resource name cannot be found.

2223 groups already exist.

2224 account already exists.

2225 the resource permission list already exists.

2226 this operation can only be performed on the primary domain controller for that domain.

2227 the security database is not started.

2228 there are too many names in the user account database.

2229 disk IZP O failed.

2230 has exceeded the limit of 64 projects per resource.

2231 users with sessions must not be deleted.

2232 the upper directory cannot be found.

2233 cannot be added to the secure database session cache segment.

2234 this operation cannot be performed on this particular group.

2235 user account database session cache does not record this user.

2236 users already belong to this group.

2237 users do not belong to this group.

2238 this user account has not been defined.

2239 this user account has expired.

2240 this user may not log on to the network from this workstation.

2241 users are not allowed to log on to the network at this time.

2242 the password for this user has expired.

2243 the password for this user cannot be changed.

2244 this password cannot be used at this time.

The 2245 password does not meet the needs of the password policy. Check the requirements for minimum password length, password complexity, and password history.

2246 the password for this user was only recently enabled and cannot be changed now.

2247 the security database is corrupted.

2248 there is no need to update the network / local security database for this replica replication.

2249 the database replicated by this replica is out of date; please synchronize the data in it.

2250 this network connection does not exist.

2251 this asg_type is not valid.

2252 this device is currently being shared.

2270 the computer name cannot be added as a message alias. This name may already exist on the network.

2271 the courier service has been started.

2272 the messenger service failed to start.

This message alias was not found on the 2273 network.

2274 this message alias has been forwarded.

2275 this message alias has been added, but it is still forwarded.

2276 this message alias already exists locally.

2277 the number of message aliases added has exceeded the limit.

2278 unable to delete the computer name.

2279 messages cannot be forwarded back to the same workstation.

2280 an error occurred with the domain message processor.

2281 the message has been sent, but the recipient has suspended the messenger service.

2282 messages have been sent but have not yet been received.

2283 message aliases are currently in use. Please try again later.

2284 the courier service has not been started.

2285 the name is not on the local computer.

2286 the forwarded message alias was not found on the network.

2287 the message alias table for the remote communication station is full.

2288 the message for this alias is not currently being forwarded.

2289 the broadcast was truncated.

2294 the device name is invalid.

2295 write error.

2297 the message alias on the network is duplicated.

2298 this message alias will be deleted later.

2299 did not remove message aliases from all networks.

2300 this operation cannot be performed on computers that use multiple networks.

2310 this shared resource does not exist.

2311 devices are not shared.

2312 A session with this computer name does not exist.

2314 there are no files opened with this identification number.

2315 failed to execute the remote administration command.

2316 failed to open the remote temporary file.

2317 the data returned from the remote management command has been truncated to 64K.

2318 this device cannot be shared as both background processing resources and non-background processing resources.

2319 the information in the server inventory may be incorrect

2320 the computer is not active in this domain

2321 before deleting a share, you need to delete the share from the distributed file system.

2331 cannot perform this operation on this device

2332 this device cannot be shared.

2333 this device is not turned on.

2334 this device name list is not valid.

2335 queue priority is invalid.

2337 there are no shared communication devices.

2338 the specified queue does not exist.

2340 this equipment list is invalid.

2341 the requested device is invalid.

2342 the daemon is using this device.

2343 this device has been used as a communication device.

2351 this computer name is not valid.

2354 the specified string and prefix are too long.

2356 this path component is invalid.

2357 unable to determine the input type.

2362 the type buffer is not large enough.

2370 the profile must not exceed 64K.

2371 the initial offset is out of line.

2372 the system cannot delete the current connection to the network resource.

2373 the system cannot parse the command line in this file.

2374 error loading configuration file. \

2375 an error occurred while saving the configuration file, only partially saved.

2378 this log file has changed between reads.

2380 the resource path cannot be a directory.

2381 the resource path is invalid.

2382 the destination path is invalid.

2383 the source and destination paths belong to different servers.

2385 the requested Run server is now paused.

2389 error communicating with Run server.

2391 an error occurred while starting background processing.

2392 the shared resource to which you are connected cannot be found.

2400 the LAN adapter number is invalid.

2401 this network connection has a file open or request to be suspended.

2402 connections in use still exist.

2403 this shared name or password is not valid.

2404 the device is in use by an active process and cannot be disconnected.

2405 this drive letter is already in use locally.

2430 the specified customer is already registered in the specified event.

The 2431 police report is full.

2432 the alert name issued is invalid or does not exist.

2433 the recipient of the alarm is invalid.

The login time of 2434 users is no longer legal. So the user's session with the server has been deleted.

2440 there is no requested record number in the log file.

2450 the user account database is not configured correctly.

2451 this operation is not allowed when the Netlogon service is running.

2452 this operation cannot be performed on the last administrative account.

2453 the domain controller for this domain could not be found.

2454 unable to set login information for this user.

2455 the Netlogon service has not been started.

2456 cannot be added to the user account database.

2457 the clock of this server is inconsistent with the clock of the primary domain controller.

2458 A password mismatch was detected.

2460 the server identifier does not specify a valid server.

2461 the session identity does not specify a valid session.

2462 the connection identifier does not specify a valid connection.

2463 No other items can be added to the available server table.

2464 the server has reached the limit on the number of sessions supported.

2465 the server has reached the maximum number of supported connections.

2466 the number of files opened by the server has reached the limit and cannot open more files.

2467 this server does not register a replacement server.

2470 Please use the low-level API (remote Management Protocol).

2480 the UPS service cannot access the UPS driver.

2481 UPS service setting error.

2482 the UPS service cannot access the specified communication port (Comm Port).

The 2483 UPS shows that the line is down or the battery is low and the service is not started.

2484 the UPS service was unable to perform a system shutdown.

2500 the following program returns an MS-DOS error code:

2501 the following programs require more memory:

2502 the following program called an unsupported MS-DOS function:

The 2503 workstation failed to start.

2504 the following files are corrupted.

2505 Bootstrap is not specified in the boot block definition file.

2506 NetBIOS returned error: NCB and SMB data dump.

2507 disk IPUBO error.

2508 cannot replace the image parameter.

2509 too many image parameters across the disk sector range.

2510 is not an image generated from a MS-DOS floppy disk formatted with / S.

2511 will restart remotely later.

2512 unable to call the remote startup server.

2513 cannot connect to the remote boot server.

2514 unable to open the image file on the remote boot server.

2515 is connecting to the remote boot server.

2516 is connecting to the remote boot server.

2517 the remote startup service has been stopped. Please check the error log file to find out the cause of the error.

2518 remote startup failed, please check the error log file to find out the cause of the error.

2519 A second remote initiation (Remoteboot) resource connection is not allowed.

2550 the browsing service is set to MaintainServerList=No.

2610 the service cannot be started because there is no network card to start with this service.

2611 the service cannot be started because the startup information in the registry is incorrect.

2612 could not start the service because its database could not be found or corrupted.

2613 the service could not be started because the RPLFILES shared resource could not be found.

2614 the service cannot be started because the RPLUSER group cannot be found.

2615 unable to enumerate service records.

The 2616 workstation recording information is corrupted.

2617 workstation records could not be found.

2618 other workstations are using this workstation name.

2619 the profile record is corrupted.

2620 profile record could not be found.

2621 other profiles are using this name.

2622 many workstations are using this profile.

2623 the configuration record is corrupted.

2624 configuration record could not be found.

2625 the adapter identification record is damaged.

2626 an error occurred with the internal service.

2627 the vendor identification record is corrupted.

2628 the boot block record is corrupted.

2629 No user account records were found for this workstation.

2630 RPLUSER local group could not be found.

2631 Boot block record not found.

2632 the selected profile is not compatible with this workstation.

2633 other workstations are using the selected network card.

2634 some profiles are using this configuration.

2635 several workstations, profiles, or configurations are using this startup block.

The 2636 service was unable to make a backup of the remote startup database.

2637 No adapter records were found.

2638 No vendor records were found.

2639 this vendor name is being used by other vendor records.

2640 other startup area records are using startup name or vendor identification records.

2641 other configurations are using this configuration name.

2660 the internal database maintained by the Dfs service is corrupt

2661 A record in the internal database is corrupted

2662 input path does not match volume path

2663 the given volume name already exists

2664 the specified server share has been shared in Dfs

2665 the server share shown does not support the displayed Dfs volume

2666 this operation is not valid on non-leaf volumes.

2667 this operation is not valid on leaf volumes.

2668 this operation is ambiguous because there are multiple servers for the volume.

2669 unable to create connection point

2670 the server is not recognized by Dfs

2671 the renamed destination path specified is invalid.

2672 specify Dfs volume off-line

2673 the specified server does not serve this volume

2674 A loop in the Dfs name was detected

2675 this operation is not supported on server-based Dfs

2676 this volume has been supported by the specified server sharing

2677 unable to delete the previous server sharing support for this volume

2678 Inter-Dfs volumes do not support this operation

2679 the internal state of the Dfs service has become inconsistent

2680 the Dfs service has been installed on the specified server

2681 of the reconciled Dfs data is the same

2682 unable to delete Dfs root volume-uninstall Dfs if necessary

2683 the subdirectory or parent directory of the share already exists in a Dfs

2690 Dfs internal error

2691 this machine has joined the domain.

2692 this machine is not currently added to the domain.

2693 this machine is a domain controller and cannot be exited from the domain.

2694 the target domain controller does not support machine accounts created in OU.

2695 the specified workgroup name is invalid

2696 the specified computer name is not compatible with the default language used on the domain controller.

2697 the specified computer account could not be found.

2999 this is the last error within the scope of NERR.

3000 an unknown print monitor is specified.

3001 the specified printer driver is currently in use.

3002 No buffer files were found.

3003 No StartDocPrinter calls were sent.

3004 No AddJob calls were sent.

3005 the specified print processor is already installed.

3006 the specified print monitor has been installed.

3007 the specified print monitor does not have the required functionality.

3008 the specified print monitor is in use.

3009 this operation request is not allowed when there are jobs queued on the printer.

3010 the requested operation was successful. The changes will not take effect until the system is restarted.

3011 the requested operation was successful. The changes will not take effect until the service is restarted.

3012 the printer cannot be found.

3023 user-specified shutdown command file, there is a problem with its configuration. However, the UPS service has been started.

3029 because the user account database (NET.ACC) cannot be found or corrupted, and there is no backup database available, the local security mechanism cannot be started. The system is not secure!

3037 @ I * login hours

3039 has exceeded the limit for copying copies of files in a directory.

3040 has exceeded the directory tree depth limit for replica replication.

3046 unable to log in. The user is currently logged in, and the parameter TRYUSER is set to NO.

3052 the necessary parameters are not provided on the command line or configuration file.

3054 unable to meet the request for resources.

3055 there is a problem with the system configuration.

3056 system error.

3057 an internal consistency error occurred.

3058 the options for the configuration file or command line are not clear.

3059 the parameters in the configuration file or command line are duplicated.

3060 the service has no response control and the DosKillProc function has stopped serving.

3061 an error occurred running the service program.

3062 unable to start secondary services.

There is something wrong with the 3064 file.

3070 memory

3071 disk space

3072 threads

3073 process

3074 Security failed.

3075 the LAN Manager root directory is incorrect or cannot be found.

3076 there is no network software installed.

3077 the server is not started.

3078 the server cannot access the user account database (NET.ACC).

3079 the files installed in the LANMAN tree are incompatible.

The 3080 LANMAN\ LOGS directory is invalid.

3081 the specified domain cannot be used.

3082 another computer is using this computer name as a message alias.

3083 failed to declare the server name.

3084 the user account database is not configured correctly.

3085 the server is not running user-level security.

The 3087 workstation is set up incorrectly.

3088 check your error log file for more information.

3089 cannot write to this file.

3090 the ADDPAK file is corrupted. Please delete LANMAN\ NETPROG\ ADDPAK.SER and reapply all ADDPAK.

3091 the LM386 server cannot be started because CACHE.EXE is not running.

3092 the account for this computer cannot be found in the security database.

3093 this computer is not a member of the SERVERS group.

The 3094 SERVERS group is not in the local security database.

3095 this Windows NT computer is set to be a member of a group, not a member of a domain. There is no need to run the Netlogon service in this configuration.

3096 No Windows NT domain controller was found for this domain.

The 3098 service cannot be validated with the primary domain controller.

3099 there is a problem with the creation date or serial number of the security database file.

3100 the operation could not be performed because of an error in the network software.

3102 this service cannot lock segments of the network control block (NCB) for a long time. The error code is the relevant data.

3103 this service cannot unlock the network control block (NCB) segment for a long time. The error code is the relevant data.

3106 received an unexpected network control block (NCB). NCB is the relevant data.

3107 the network is not started.

The DosDevIoctl or DosFsCtl call for 3108 NETWKSTA.SYS failed. The data is displayed in the following format: the DWORD value represents the CS:IP WORD error code WORD Ioctl or FsCtl number that called Ioctl or FsCtl

3111 an unexpected NetBIOS error occurred. The error code is the relevant data.

3112 the server message block (SMB) received is invalid. SMB is the relevant data.

3114 some items in the error log file are missing because of a buffer overflow.

3120 initialization parameters that control the amount of resources outside the network buffer are set, so too much memory is required.

3121 the server cannot increase the size of the memory segment.

3124 the server failed to start. All three chdev parameters must be zero or non-zero at the same time.

3129 the server was unable to update the AT schedule file. The file is corrupted.

3130 an error occurred when the server called NetMakeLMFileName. The error code is the relevant data.

3132 cannot lock the server buffer for a long time. Check the free space on the swap disk, and then restart the system to start the server.

3140 the service is stopped due to multiple consecutive network control block (NCB) errors. The last bad NCB appears in the form of raw data.

3141 the message server has stopped running because the data segment shared by the message server is locked.

3151 the display message cannot be popped because of an error in the VIO call. The error code is the relevant data.

3152 the server message block (SMB) received is invalid. SMB is the relevant data.

The information segment of 3160 workstation is greater than 64K. The size is as follows (in the format of DWORD values):

The 3161 workstation was unable to get the name and number of the computer.

The 3162 workstation could not initialize the Async NetBIOS thread. The error code is the relevant data.

The 3163 workstation cannot open the foremost shared segment. The error code is the relevant data.

The host table of 3164 workstation is full.

3165 there is a problem with the mailbox server message block (SMB) received, and SMB is the relevant data.

An error occurred when the 3166 workstation started the user account database. The error code is the relevant data.

An error occurred when the 3167 workstation responded to the SSI reauthentication request. Function code and error code are related data.

3174 the server was unable to read the AT schedule file.

3175 the server found an incorrect AT schedule record.

3176 the server could not find the AT plan file, so create a plan file.

3185 because the user account database (NET.ACC) cannot be found or corrupted, and there is no backup database available, the local security mechanism cannot be started. The system is not secure!

3204 the server was unable to create a thread. The THREADS parameter in CONFIG.SYS must be enlarged.

3213 has exceeded the limit for copying copies of files in a directory.

3214 has exceeded the directory tree depth limit for replica replication.

3215 the message received in the mailbox is not recognized.

3217 unable to log in. The user is currently logged in, and the parameter TRYUSER is set to NO.

3230 A power outage to the server was detected.

3231 the UPS service has turned off the server.

3232 the UPS service did not finish executing the user-specified shutdown command file.

3233 unable to open the UPS driver. The error code is the relevant data.

3234 the power supply has been restored.

3235 there is a problem with the user-specified shutdown command file.

3256 an unrepairable error occurred in the dynamic link library for this service.

3257 the system returned an unexpected error code. The error code is the relevant data.

3258 Fault tolerant error log file-LANROOT\ LOGS\ FT.LOG exceeds 64K.

3259 the fault-tolerant error log file-LANROOT\ LOGS\ FT.LOG, which has the update progress bit set when it is opened, means that the system crashed the last time the error log was used.

3301 Remote IPC

3302 Remote Admin

3303 Logon server share

3304 Network error.

3400 there is not enough memory to start workstation services.

3401 there was an error reading the NETWORKS project of the LAMAN.INI file.

3404 there are too many NETWORKS projects in the LAMAN.INI file.

3408 programs cannot be used in this operating system.

3409 the forwarder has been installed.

3411 an error occurred while installing NETWKSTA.SYS. Please press ENTER to continue.

3412 solve the program link problem.

3419 you have opened a file or device and forced to disconnect the meeting, resulting in data loss.

3420 default sharing for internal use

3421 Messenger service

3500 command completed successfully.

3501 the option used is invalid.

3503 command contains an invalid number of parameters.

3504 the command finished running, but one or more errors occurred.

3505 the value of the option used is incorrect.

The 3510 command uses conflicting options.

3512 software requires a new version of the operating system.

3513 data is more than Windows 2000 can return.

3515 this command can only be used on Windows 2000 domain controllers.

3516 this instruction cannot be used for a Windows 2000 domain controller.

3520 the following Windows 2000 services have been started:

3525 stopping the workstation service also stops the server service.

3526 workstation has open files.

3533 the service is starting or stopping. Please wait a moment and try again.

The 3534 service did not report any errors.

3535 an error occurred while controlling the device.

3660 these workstations have sessions on this server:

3661 these workstations have sessions that open files on this server:

3666 the message alias has been forwarded.

3670 you have the following remote connections:

3671 continuing to run will cancel the connection.

3676 records new network connections.

3677 does not record new network connections.

3678 an error occurred while saving the configuration file, and the previously recorded network connection status has not changed.

3679 error reading configuration file.

3682 No network services are started.

3683 the list is empty.

The 3689 workstation service is already running, and Windows 2000 ignores the command options for the workstation.

3694 the shared queue cannot be deleted while the print job is being processed to the queue in the background.

3710 error opening help file.

3711 the help file is empty.

3712 the help file is corrupted.

3714 this is an operation designed for systems that install older software.

3716 the device type is unknown.

3717 the log file is corrupted.

3718 the program file name must end with .exe.

3719 No matching share was found, so it was not deleted.

3720 the value of Unit / week in the user record is incorrect.

3725 an error occurred while deleting the share.

3726 the user name is not valid.

The 3727 password is not valid.

3728 passwords do not match.

3729 the permanent connection was not fully restored.

3730 incorrect computer name or domain name.

3732 cannot set the default permissions for this resource.

3734 did not enter the correct password.

3735 did not enter the correct name.

3736 the resource cannot be shared.

The 3737 permission string contains invalid permissions.

3738 you can only do this on a printer or communication device.

3743 the server does not have the function of remote management.

3752 there are no user sessions on this server.

3756 the response is invalid.

3757 did not provide a valid response.

The target list provided in 3758 does not match the printer queue target list.

3761 the end time in the specified time range is earlier than the start time.

The time provided in 3764 is not on the hour.

3765 12 and 24-hour formats cannot be mixed.

3767 the date format provided is invalid.

3768 the date range provided is invalid.

3769 the time range provided is invalid.

The parameter of 3770 NET USER is not valid. Please check the shortest password length and / or provide parameters.

The value of 3771 ENABLESCRIPT must be YES.

3773 the country code provided is invalid.

3774 users have been created successfully, but cannot be added to the USERS local group.

3775 the user context provided is invalid.

3777 the file send feature is no longer supported.

3778 you may not have specified the path for ADMIN$ and IPC$ shares.

3784 only disk shares can be marked as cacheable.

3802 this planned date is not valid.

The 3803 LANMAN root directory cannot be used.

3804 the SCHED.LOG file could not be opened.

3805 the server service has not been started.

3806 the AT job ID does not exist.

3807 the AT plan file is corrupted.

3808 the delete operation cannot be run because there is a problem with the AT schedule file.

3809 the command line must not exceed 259 characters.

3810 the AT schedule file cannot be updated because the disk is full.

3812 the AT plan file is invalid. Please delete this file and create a new one.

3813 the AT schedule file has been deleted.

3814 the syntax of this command is: AT [id] [/ Delete] AT time [/ EVERY: date | / NEXT: date] Command AT command will schedule the program to run on the server at a specified date and time. It also displays a list of programs and commands scheduled to run. You can specify a date in the format M, T, W, Th, F, Sa, Su, or 1-31. You can specify the time as HH:3814

The 3815 AT command timed out. Please try again later.

3816 the minimum password usage period of a user account shall not be greater than the maximum password usage period.

3817 the specified value is not compatible with the server where the underlying software is installed. Please specify a smaller value.

3901 *

3902 * unexpected arrival at the end of message *

3905 Please press ESC to exit

3906...

3912 time server not found.

3915 unable to determine the user's home directory.

3916 does not specify the user's home directory.

3920 there is no longer a drive letter available.

3936 this computer is not currently configured to use a specified SNTP server.

3953 syntax error.

3960 the specified file number is invalid.

3961 the specified print job number is invalid.

3963 the specified user or group account could not be found.

3965 users have been added, but NetWare's file and printing services cannot be enabled.

3966 there is no file and printing service installed for NetWare.

3967 cannot set user properties for NetWare's file and print services.

3969 NetWare compatible login

4000 WINS encountered an error while processing the command.

4001 Local WINS cannot be deleted.

4002 the file import operation failed.

4003 the backup operation failed. Have you made a full backup before?

4004 the backup operation failed. Please check the directory where you backed up the database.

This name is not found in the 4005 WINS database.

4006 it is not allowed to copy a partner that has not been configured.

4100 DHCP customers get an IP address that has been used on the Internet. The local interface will be disabled until the DHCP customer can get a new address.

4200 the incoming GUID is not recognized as a valid WMI data provider.

4201 cannot recognize whether the passed instance name is a valid WMI data provider.

4202 the incoming data item identifier is not recognized as a valid WMI data provider.

4203 unable to complete the WMI request, you should try again.

4204 the WMI data provider was not found.

4205 the WMI data provider references to an unregistered instance group.

4206 WMI block or event notification is enabled.

4207 WMI blocks are no longer available.

4208 the WMI data service is not available.

4209 the WMI data provider was unable to complete the request.

4210 the WMI MOF information is invalid.

4211 the WMI registration information is invalid.

4212 WMI block or event notification is disabled.

4213 WMI data items or blocks are read-only.

4214 WMI data items or blocks cannot be changed.

4300 the media identifier does not represent a valid media.

4301 the library identifier does not represent a valid library.

4302 the media buffer pool identifier does not represent a valid media buffer pool.

The 4303 drive is incompatible with the media or is in a different library.

4304 Media is currently in the offline library and you must be online to run this operation.

4305 the operation cannot be run in the offline library.

4306 the library, drive, or media buffer pool is empty.

4307 the library, disk, or media buffer pool must be empty to run this operation.

4308 there is currently no media available in this media buffer pool or library.

4309 the resources required for this operation have been disabled.

4310 the media identifier does not represent a valid cleaner.

4311 cannot clean the drive or does not support cleaning.

4312 the object identifier does not represent a valid object.

4313 cannot read or write to the database.

4314 the database is full.

4315 Media is not compatible with the device or media buffer pool.

4316 the resources required for this operation do not exist.

4317 the operation identifier is incorrect.

4318 Media is not installed or is not ready.

4319 the device is not ready.

4320 the operator or system administrator rejected the request.

The 4321 drive identifier does not represent a valid drive.

4322 the library is full. There are no slots available.

4323 the transporter cannot access the media.

4324 unable to load media into the drive.

4325 unable to retrieve the status of the drive.

4326 unable to retrieve the status of the slot.

4327 unable to retrieve the status of the transfer.

4328 cannot be used because the transport is already in use.

4329 cannot open or close the eject / eject port.

4330 cannot eject the media because it is in the drive.

4331 the cleaner slot is reserved.

The 4332 does not reserve a washer slot.

4333 the washer cartridge has been cleaned for the maximum number of times.

4334 unexpected media identification number.

4335 the last remaining items in this group or source cannot be deleted.

The message provided in 4336 exceeds the maximum size allowed for this parameter.

4337 this volume contains system and page files.

4338 the media type cannot be removed from the library because at least one drive in the library can support this media type.

4339 the offline media cannot be loaded into this system because there is no booted drive available.

4340 (Y hand N) [Y]

4341 (Y _ N) [N]

4342 error

4343 OK

4344 Y

4345 N

4346 any

4347 A

4348 P

4349 (not found)

4350 the remote storage service cannot recall the file.

4351 the remote storage service is inoperable at this time.

4352 the remote storage service encountered a media error.

4354 Please type the password:

4358 Please type the user's password:

4359 Type the password for the shared resource:

4360 Please type your password:

4361 Please type the password again to confirm:

4362 Please type the user's old password:

4363 Please type the user's new password:

4364 Please type your new password:

4365 Type the replicator service password:

4368 please type your user name:

4372 print Job details

4378 controls the following running services:

4379 Statistics are available for the following services that are running:

4381 the syntax for this command is:

4382 the options for this command are:

4383 Type the name of the primary domain controller:

4385 Sunday

4386 Monday

4387 Tuesday

4388 Wednesday

4389 Thursday

4390 this file or directory is not a reparse point.

4391 the property of the reparse point cannot be set because it conflicts with existing properties.

4392 the data in the reparse point buffer is invalid.

4393 the label in the reparse point buffer is invalid.

4394 the label specified in the request does not match the reparse point.

4395 W

4396 Th

4397 F

4398 S

4399 Sa

4401 group name

4402 Notes

4403 members

4406 aliases

4407 Notes

4408 members

4411 user name

4412 full name

4413 Notes

Comments from 4414 users

4415 parameters

4416 country (region) Code

4417 permission level

4418 operator permissions

4419 account enabled

4420 account expires

4421 Last set password

4422 password expires

4423 password can be changed

4424 workstations allowed

4425 disk space limit

4426 No limit

4427 local group members

4428 Domain Controller

4429 login script

4430 Last login

4431 Global group members

4432 allowed login hours

4433 all

4434 none

4436 main directory

4437 requires a password

4438 users can change their password

4439 user Profil

4440 locked

4450 computer name

4451 user name

4452 Software version

4453 workstations are active in

4454 Windows NT root directory

4455 workstation domain

4456 logging in to the domain

4457 other domains

4458 COM Open timeout (seconds)

4459 COM send count (bytes)

4460 COM send timeout (milliseconds)

4461 DOS session print timeout (seconds)

4462 maximum error log file size (K)

4463 cache limit (K)

4464 Network buffers

4465 character buffers

4466 domain buffer size

4467 character buffer size

4468 full name of computer

4469 Workstation Domain DNS name

4470 Windows 2000

4481 Server name

4482 Server comment

4483 send administrative alerts to

4484 Software version

4485 Peer Server

4486 Windows NT

4487 server level

4488 Windows NT Server

4489 the server is running on the

4492 server is hidden

4500 zero backup storage is not available on this volume.

4506 maximum number of users logged in

4507 maximum number of administrators that can coexist at the same time

4508 maximum number of shared resources

4509 maximum number of resource connections

4510 maximum number of files opened by the server

4511 maximum number of files opened per session

4512 maximum number of file locks

4520 idle session time (minutes)

4526 sharing level

4527 user level

4530 unrestricted servers

4570 how long must the user log out after the expiration of the time?

4571 how many times do I lock my account after my password is incorrect?

4572 minimum password life (days):

4573 maximum password life (days):

4574 Lower limit of password length:

4575 length of password history maintained:

4576 computer roles:

4577 Primary domain controller for the workstation domain:

4578 lockout threshold:

4579 Lock duration (minutes):

4580 lock the observation window (minutes):

4600 statistics begin with

4601 accepted sessions

4602 session timeout

4603 session error

4604 KB sent

4605 received KB

4606 average response time (milliseconds)

4607 Network error

4608 files accessed

4609 print jobs processed in the background

4610 system error

4611 password violation

4612 permission violation

4613 accessed communication equipment

4614 session started

4615 reconnected sessions

4616 session start failed

4617 disconnected session

4618 Network I Band O execution

4619 Files and pipes are accessed

4620 time buffer depleted

4621 large buffer zone

4622 request buffer

4626 connections have been made

4627 connection failed

4630 bytes received

4631 received server message block (SMB)

4632 bytes transferred

4633 Server message Block (SMB) transmitted

4634 read operation

4635 write operation

4636 reject the original read

4637 reject original write

4638 Network error

4639 connections have been made

4640 reconnect

4641 Server disconnected

4642 session started

4643 session pending

4644 failed sessions

4645 Operation failed

4646 usage count

4647 failed to use count

4655 message name forwarding has been cancelled.

4661 the password has been changed successfully.

4664 messages have been sent to all users on the network.

4666 messages have been sent to all users on this server.

4696 Windows NT Server

4697 Windows NT Workstation

4698 MS-DOS enhanced workstation

4700 Server name comment

4701 Resource share name type usage notes

4702 (UNC)

4703...

4704 Domain

4706 other available networks:

4710 Disk

4711 Print

4712 Comm

4713 IPC

4714 status local remote network

4715 OK

4716 rest

4717 paused

4718 disconnect

4719 error

4720 is connecting

4721 is reconnecting

4722 statu

4723 Local name

4724 remote name

4725 Resource types

4726 # Open

4727 # connection

4728 not available

4730 share name resource comment

4731 share name

4732 Resources

4733 background processing

4734 permissions

4735 most users

4736 No limit

4737 users

4740 identification code path username # locked

4741 file identification code

4742 Lock

4743 permissions

4750 computer user name customer type open idle time

4751 computer

4752 session time

4753 idle time

4754 Resource share name type # Open

4755 customer Typ

4756 guests log in

4770 offline caching enabled: manual recovery

4771 offline caching is enabled: automatic recovery

4772 offline caching is enabled: no sharing between users

4773 offline cache is disabled

4774 automatic

4775 Manual

4800 name

4801 forward to

4802 has been forwarded to you from the following locations

4803 users of this server

4804 users have interrupted network transmission by Ctrl+Break.

4810 name Job number size status

4811 Operation

4812 Printing

4813 name

4814 Job #

4815 Siz

4816 statu

4817 delimited files

4818 Notes

4819 priority

4820 after printing

4821 print until

4822 print processor

4823 additional information

4824 parameters

4825 printing equipment

4826 printer activity

4827 Printer shelved

4828 Printer error

4829 removing printers

4830 printer status unknown

4841 Job #

4842 users are being submitted

4843 Notification

4844 Job data types

4845 Job parameters

4846 is waiting.

4847 shelved in queue

4848 is being processed in the background

4849 paused

4850 offline

4851 error

4852 out of paper

4853 need intervention

4854 is printing

4855 on

4862 driver

4930 user name type date

4931 Lock

4932 Servic

4933 server

4934 server started

4935 server paused

4936 server has continued to operate

4937 the server has stopped

4938 session

4939 logged in guests

4940 logged in users

4941 sign in to the administrator

4942 normal logout

4943 login

4944 logout error

4945 logout automatically disconnected

4946 logout administrator disconnect

4947 logout is subject to login restrictions

4948 Servic

4957 account

4964 modified account system settings

4965 login restrictions

4966 exceeded limit: unknown

4967 exceeded limit: login time

4968 exceeds limit: account expires

4969 exceeds the limit: invalid workstation identification number

4970 exceeds the limit: account deactivation

4971 exceeded limit: account deleted

4972 Resources

The 4978 password is incorrect

4979 Administrator privileges are required

4980 acc

4984 access denied

4985 unknown

4986 other

4987 duration:

4988 duration: invalid

4989 duration: less than 1 second

4990 (none)

4994 interview is over

4995 log in to the network

4996 refuse to log in

4997 Program message time

4999 the administrator has unlocked the account

5000 Log out of the network

5001 the cluster resource cannot be moved to another group because it is required by other resources.

5002 No dependencies were found for this cluster resource.

5003 this cluster resource cannot be dependent on the specified resource because it is already in a dependent state.

5004 this cluster resource is not online.

5005 there are no cluster nodes available for this operation.

5006 there are no cluster resources.

5007 No cluster resources were found.

5008 shutting down the cluster.

5009 the cluster node cannot be detached from the cluster because it is online.

5010 object already exists.

5011 this object is already in the list.

5012 there are no cluster groups available for new requests.

5013 No cluster groups were found.

5014 this operation cannot be completed because the cluster group is not online.

5015 the cluster node is not the owner of this resource.

5016 the cluster node is not the owner of this resource.

5017 Cluster resources cannot be created in the specified resource monitor.

5018 Cluster resources cannot be brought online through Resource Monitor.

5019 this operation cannot be completed because the cluster resources are online.

5020 because it is a quorum resource, the cluster resource cannot be deleted or offline.

5021 this cluster cannot make the specified resource an arbitration resource because it does not have the ability to become an arbitration resource.

5022 Cluster software is shutting down.

The status of the 5023 group or resource is not the correct state to perform the requested operation.

5024 attributes have been stored, but not all changes will take effect until the next time the resource comes online.

5025 because it is not in the shared storage category, the cluster cannot make the specified resource a quorum resource.

5026 the cluster resource cannot be deleted because it is a kernel resource.

5027 the arbitration resource failed to go online.

5028 the arbitration log could not be created or loaded successfully.

5029 the cluster log is corrupted.

5030 the record cannot be written to the cluster log because the log has exceeded the maximum limit.

5031 the cluster log has exceeded the maximum limit.

5032 No checkpoint records were found in the cluster log.

5033 does not meet the minimum disk space required for the log.

5034 the cluster node failed to control the quorum resource because it is owned by another active node.

5035 the cluster network for this operation is invalid.

5036 there are no cluster nodes available for this operation.

5037 all cluster nodes must be running to perform this operation.

5038 Cluster resource failed.

5039 the cluster node is invalid.

5040 the cluster node already exists.

5041 A node is joining the cluster.

5042 the cluster node was not found.

5043 No cluster local node information was found.

5044 the cluster network already exists.

5045 the cluster network was not found.

5046 the cluster network interface already exists.

5047 No cluster network interface was found.

5048 the cluster request is not valid in this object.

5049 the cluster network provider is invalid.

5050 the cluster node is broken.

5051 cannot connect to the cluster node.

5052 the cluster node is not a member of the cluster.

5053 Cluster join operation is in progress.

5054 the cluster network is invalid.

5055 Mar

5056 the cluster node can be used.

5057 the cluster IP address is already in use.

5058 the cluster node is not aborted.

5059 there is no valid cluster security context.

5060 the cluster network is not configured for internal cluster communication.

5061 the cluster node has already started.

5062 the cluster node is broken.

5063 the cluster network is online.

5064 the cluster network is offline.

5065 the cluster node is already a member of the cluster.

5066 this cluster network is the only configuration for internal cluster communication for two or more active cluster nodes. Internal communication capabilities cannot be removed from the network.

5067 one or more cluster resources rely on the network to provide services to customers. Customer access capabilities cannot be removed from the network.

5068 this operation cannot be performed as a quorum resource on a cluster resource. You cannot take the quorum resource offline or modify its owner list.

5069 the cluster quorum resource does not allow any dependencies.

5070 the cluster node is paused.

5071 Cluster resources cannot be online. The owner node cannot run on this resource.

5072 the cluster node is not ready to perform the requested operation.

5073 the cluster node is shutting down.

5074 abandon the cluster node join operation.

5075 the cluster join operation failed due to incompatibility between the software version of the joining node and the supporter.

5076 this resource cannot be created because the cluster has reached the resource limit it can supervise.

5077 the system configuration has changed during the cluster join or formation operation. Discard the join or form operation.

5078 the specified resource type could not be found.

5079 the specified node does not support this resource, perhaps because of inconsistent versions or because there is no resource DLL on this node.

5080 the resource DLL does not support the specified resource name. This may be due to an incorrect (or changed) name provided to the source DLL.

5081 you cannot register any authentication packages on the RPC server.

5082 the group cannot be brought online because the owner of the group is not in the group's preferred list. To change the owner node of a group, move the group.

5083 the serial number of the cluster database has changed or is not compatible with the lock program node, so the join operation was not successful. This can happen if there are any changes to the cluster database during the join operation.

5084 Resource Monitor does not allow failed operations in its current state. This can happen when a resource is in a suspended state.

5085 unlocked program code receives a request to reserve a lock for a global update.

5086 the cluster service could not find the quorum disk.

5087 the backed up cluster database may be corrupted.

The 5088 DFS root directory is already in this cluster node.

5089 the resource property could not be modified due to a conflict with another existing property.

5090 Spain

5091 Denmark

5092 Sweden

5093 Norway

5094 Germany

5095 Australia

5096 Japan

5097 South Korea

5098 China

5099 Taiwan

5100 Asia

5101 Portugal

5102 Finland

5103 Arab

5104 Hebrew

5153 the UPS service is about to perform the final shutdown.

The 5170 workstation must be started with NET START.

5175 remote IPC

5176 remote Management

5177 default sharing

5291 never

5292 never

5293 never

5295 NETUS.HLP

5296 NET.HLP

5300 the network control block (NCB) request ran successfully. NCB is the relevant data.

5301 the network control block (NCB) buffer length for SEND DATAGRAM, SEND BROADCAST, ADAPTER STATUS, or SESSION STATUS is invalid. NCB is the relevant data.

5302 the data description array specified by the network control block (NCB) is invalid. NCB is the relevant data.

5303 the command specified by the network control block (NCB) is invalid. NCB is the relevant data.

5304 the message exchange code specified by the network control block (NCB) is invalid. NCB is the relevant data.

5305 the network control block (NCB) command timed out. The session may terminate abnormally. NCB is the relevant data.

5306 the network control block (NCB) message received is incomplete. NCB is the relevant data.

5307 the buffer specified by the network control block (NCB) is invalid. NCB is the relevant data.

5308 the session number specified by the network control block (NCB) has no effect. NCB is the relevant data.

The 5309 network card does not have any resources available. The network control block (NCB) request was denied. NCB is the relevant data.

5310 the session specified by the network control block (NCB) has been closed. NCB is the relevant data.

5311 the network control block (NCB) command has been cancelled. NCB is the relevant data.

5312 the message block specified by the network control block (NCB) is illogical. NCB is the relevant data.

5313 the name already exists in the local adapter name table. The network control block (NCB) request was denied. NCB is the relevant data.

5314 Nic name table is full. The network control block (NCB) request was denied. NCB is the relevant data.

5315 the network name already has an active session, now unregister. The network control block (NCB) command has finished running. NCB is the relevant data.

5316 the previously issued Receive Lookahead command still works for this session. The network control block (NCB) command was rejected. NCB is the relevant data.

5317 the local session table is full. The network control block (NCB) request was denied. NCB is the relevant data.

5318 refuses to open a network control block (NCB) session, and no listening commands are being executed on the remote computer. NCB is the relevant data.

5319 the name and number specified by the network control block (NCB) is invalid. NCB is the relevant data.

5320 the call name specified in the network control block (NCB) could not be found or there was no reply. NCB is the relevant data.

5321 the name specified in the network control block (NCB) cannot be found. Cannot fill "*" or 00h into the NCB name. NCB is the relevant data.

5322 the name specified in the network control block (NCB) is being used for the remote adapter. NCB is the relevant data.

5323 the name specified in the Network Control Block (NCB) has been deleted. NCB is the relevant data.

5324 the session specified in the network control block (NCB) terminates abnormally. NCB is the relevant data.

The 5325 network protocol detects two or more identical names on the network. The network control block (NCB) is the relevant data.

5326 received an unexpected protocol packet. Remote devices may not be compatible. The network control block (NCB) is the relevant data.

5333 the NetBIOS interface is busy. The network control block (NCB) request was denied. NCB is the relevant data.

5334 there are too many outstanding network control block (NCB) commands. The NCB request was denied. NCB is the relevant data.

5335 the adapter number specified in the network control block (NCB) is invalid. NCB is the relevant data.

5336 the network control block (NCB) command is completed while canceled. NCB is the relevant data.

5337 the name specified by the Network Control Block (NCB) has been retained. NCB is the relevant data.

5338 the Network Control Block (NCB) command cannot be canceled. NCB is the relevant data.

5351 there are multiple network control blocks (NCB) for the same session. The NCB request was denied. NCB is the relevant data.

There is an error in the 5352 network card. The only NetBIOS command that can be issued is NCB RESET. The network control block (NCB) is the relevant data.

5354 exceeds the limit on the number of applications. The network control area (NCB) request is denied, and the NCB is the relevant data.

5356 the requested resource cannot be used. The network control block (NCB) request was denied. NCB is the relevant data.

5364 system error. The network control block (NCB) request was denied. NCB is data.

5365 ROM checksum failed. The network control block (NCB) request was denied. NCB is the relevant data.

5366 the RAM test failed. The network control block (NCB) request was denied. NCB is the relevant data.

5367 digital loopback failed. The network control block (NCB) request was denied. NCB is the relevant data.

5368 Analog loopback failed. The network control block (NCB) request was denied. NCB is the relevant data.

5369 interface failed. The network control block (NCB) request was denied. NCB is the relevant data.

5370 the network control block (NCB) return code received is not recognized. NCB is the relevant data.

The failure follows the 5380 network card. The network control block (NCB) request was denied. NCB is the relevant data.

5381 the network control block (NCB) command is still on hold. NCB is the relevant data.

5509 Windows 2000 cannot start with the specified configuration and will be swapped with a previously working configuration.

5600 cannot share user or script paths.

5601 the password for the computer cannot be found in the local security database.

5602 an internal error occurred while accessing the computer's local or network security database.

5705 the log cache used by the Netlogon service to record database change data is corrupted. The Netlogon service is resetting the change log file.

5728 unable to load any transports.

5739 the number of global groups in this domain exceeds the limit that can be replicated to LanMan BDC. Please delete part of the global group or delete the LanMan BDC in the domain.

The 5742 service was unable to retrieve the necessary messages, so the remote startup customer could not be run.

A serious error occurred in the 5743 service and the customer could not be started remotely from remote boot 3Com 3Start.

5744 the service has experienced a serious system error and is about to shut down.

The 5760 service encountered an error while parsing the RPL configuration.

The 5761 service encountered an error while creating RPL profiles for all configurations.

The 5762 service encountered an error while accessing the registry.

The 5763 service encountered an error while replacing a RPLDISK.SYS that may be out of date.

The 5764 service encountered an error while adding a security account or setting file permissions. These accounts are RPLUSER local groups and user accounts for stand-alone RPL workstations. .

The 5765 service could not back up its database.

The 5766 service could not be initialized from its database. The database may not be found or corrupted. The service attempts to restore the database from the backup database.

The 5767 service was unable to restore its database from the backup database. The service will not start.

The 5768 service was unable to restore its database from the backup database.

The 5769 service could not initialize from the database it restored. The service will not start.

5771 remote startup database adopts NT 3.5 / NT 3.51 format. NT is converting it to NT 4.0 format. After the conversion is completed, the JETCONV converter will write out the application event log.

5773 the DNS server for this DC does not support dynamic DNS. Add the DNS record in the file 'SystemRoot\ System32\ Config\ netlogon.dns' to the DNS server that serves the domain referenced in that file.

5781 dynamic registration and logout of one or more DNS records did not succeed because there was no DNS server available.

6000 unable to encrypt the specified file.

6001 the specified file cannot be decrypted.

6002 the specified file is encrypted and the user does not have the ability to decrypt it.

6003 this system does not have a valid encryption recovery policy configuration.

6004 the required encryption drivers are not loaded into the system.

6005 the encryption driver used for file encryption is different from the currently loaded encryption driver.

6006 there is no user-defined EFS keyword.

6007 the specified file is not encrypted.

6008 the specified file is not a defined EFS export format.

6009 the file specified is read-only.

6010 directories have been deactivated for encryption.

6011 do not trust the server for remote encryption operations.

6118 the list of servers for this workgroup is currently unavailable

6200 for the Task Scheduler service to function properly, the configuration of the Task Scheduler service must run in the system account. Individual tasks can be configured to run in other accounts.

7001 the specified session name is invalid.

7002 the specified protocol driver is invalid.

7003 the specified protocol driver was not found on the system path.

7004 the specified terminal connection was not found on the system path.

7005 cannot create an event log registration key for this session.

7006 A service with the same name already exists in the system.

7007 A close operation is suspended on the session.

7008 there is no output buffer available.

7009 the MODEM.INF file was not found.

7010 the modem name was not found in MODEM.INF.

The 7011 modem did not accept the instructions sent to it. Verify that the configured modem matches the connected modem.

The 7012 modem did not accept the instructions sent to it. Verify that the modem is wired correctly and that the power switch is turned on.

7013 vehicle detection failed or the vehicle has been discarded due to disconnection.

7014 No dial tone was found within the required time. Make sure the phone line is properly connected and available for use.

7015 A busy signal was detected during a callback at the remote site.

7016 A sound was detected at the remote site during a callback.

7017 Transport driver error

7022 the specified session was not found.

7023 the specified session name is already in use.

7024 the requested operation cannot be completed because the terminal connection is currently busy processing a connection, disconnection, reset, or delete operation.

7025 attempts to connect to a session whose video mode is not supported by the current customer.

7035 the application attempted to start DOS graphics mode. DOS graphics mode is not supported.

7037 your interactive login permissions have been disabled. Please contact your administrator.

7038 the requested operation can only be performed on the system console. This is usually the result of direct console access required by a driver or system DLL.

7040 the customer failed to respond to the server connection message.

7041 disconnecting console sessions is not supported.

7042 reconnecting a disconnected session to the console is not supported.

7044 A request to remotely control another session is denied.

7045 denies the requested session access.

7049 the specified terminal connection driver is invalid.

7050 cannot remotely control the requested session. This may be because the session was interrupted or no user is currently logged in. Also, you cannot remotely control a session or remotely control the system console from the system console. Also, you cannot remotely control your own current session.

7051 the requested session is not configured to allow remote control.

7052 refuses to connect to this terminal server. The Terminal Server customer license is currently being used by another user. Contact your system administrator to obtain a new Terminal Server customer whose license number must be valid and unique.

7053 refuses to connect to this terminal server. Your Terminal Server customer license number has not been entered for this Terminal Server customer. Contact your system administrator to enter a valid and unique license number for this terminal server customer.

7054 the system has reached its authorized login limit. Please try again later.

7055 the customer you are using does not have authorization to use the system. Your login request was denied.

7056 the system license has expired. Your login request was denied.

8001 the file replication service API was called incorrectly.

8002 unable to start the file replication service.

8003 unable to stop the file replication service.

8004 the file replication service API terminated the request. The event log may have more information.

8005 the file replication service interrupted the request. The event log may have more information.

8006 the file replication service could not be contacted. The event log may have more information.

8007 the file replication service cannot satisfy the request because the user does not have sufficient privileges. The event log may have more information.

8008 the file replication service could not satisfy the request because the validated RPC is invalid. The event log may have more information.

8009 the file replication service cannot satisfy the request because the user does not have sufficient privileges on the domain controller. The event log may have more information.

8010 the file replication service could not satisfy the request because the authenticated RPC on the domain controller is invalid. The event log may have more information.

8011 the file replication service cannot communicate with the file replication service on the domain controller. The event log may have more information.

8012 the file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may have more information.

8013 the file replication service cannot enter the system volume due to an internal error. The event log may have more information.

8014 the file replication service cannot enter the system volume due to an internal timeout. The event log may have more information.

8015 the file replication service cannot process this request. The system volume is still busy with the previous request.

8016 the file replication service could not stop replicating the system volume due to an internal error. The event log may have more information.

8017 the file replication service detected an invalid parameter.

8200 an error occurred while installing the directory service. For more information, check the event log.

8201 the directory service evaluates group membership locally.

8202 the specified directory service property or value does not exist.

8203 the attribute syntax assigned to the directory service is invalid.

8204 the attribute type assigned to the directory service is not defined.

8205 the specified directory service property or value already exists.

8206 the directory service is busy.

8207 the directory service is invalid.

8208 the directory service cannot assign a relative identification number.

8209 the directory service has run out of relative identification number pools.

8210 the operation could not be performed because the directory service is not the master of this type of operation.

8211 the directory service was unable to initialize the subsystem that assigned the relative identification number.

8212 the requested operation does not meet one or more constraints related to the category of the object.

8213 the directory service can only run the required operations on one page object.

8214 the directory service cannot perform the requested operation on the RDN property of an object.

8215 the directory service detected an attempt to modify the object category.

8216 cannot perform the requested move through the domain.

8217 unable to contact the global catalog server.

8218 Policy objects are shared and can only be modified on the root directory.

8219 the policy object does not exist.

8220 the requested policy information is only in the directory service.

8221 the domain controller upgrade is currently in use.

8222 Domain Controller upgrade is not currently in use

An operation error occurred in 8224.

8225 A protocol error occurred.

8226 has exceeded the time limit for this request.

8227 has exceeded the size limit for this request.

8228 has exceeded the administrative limit for this request.

The response of 8229 comparison is false.

The response of 8230 comparison is true.

8231 this server does not support the requested authentication method.

8232 this server requires a more secure authentication method.

8233 inappropriate authentication.

8234 unknown authentication mechanism.

8235 returned a suggestion from the server.

8236 the server does not support key extensions to the request.

8237 this request requires a secure connection.

8238 inappropriate match.

8239 there is a constraint conflict.

8240 there is no such object on the server.

8241 has an alias problem.

8242 specified an invalid dn syntax.

8243 the object is a leaf object.

8244 has an alias obsolescence problem.

8245 the server is unwilling to process the request.

8246 A loop was detected.

8247 there is a naming conflict.

8248 the result setting is too large.

8249 this operation affects multiple DSA.

8250 the server is inoperable.

A local error occurred in 8251.

A coding error occurred in 8252.

A decoding error occurred in 8253.

8254 the lookup filter is not recognized.

8255 one or more parameters are illegal.

8256 the specified method is not supported.

8257 No results were returned.

8258 the server does not support the specified control.

8259 the customer detected a reference loop.

8260 exceeds the current reference limit.

8301 the root directory object must be the header of a naming context. The root object cannot have an instance parent class.

8302 cannot perform the add copy operation. The name context must be writable to create a copy.

8303 A reference appears to an attribute that is not defined in the schema.

8304 exceeds the maximum size of an object.

8305 try to add an object with a name that is already in use to the directory.

8306 try to add an object that belongs to a category that does not have a RDN definition in the schema.

8307 attempts to add an object that uses RDN, but the RDN is not a RDN defined in the schema.

8308 No requested properties were found in the object.

8309 the user buffer is too small.

8310 the properties specified in the operation do not appear on the object.

8311 illegal modification operation. Some aspect of the modification is not allowed.

8312 the specified object is too large.

8313 the specified instance category is invalid.

8314 the operation must be performed on the master DSA.

8315 object category properties must be specified.

8316 A required attribute is missing.

8317 try to modify an object to include an attribute that is illegal for that category.

8318 the property specified on the object already exists.

8320 the specified property does not exist or has no value.

8321 specifies multiple values for attributes that have only one value.

8322 the property value is not in the accepted range.

8323 the specified value already exists.

8324 this property cannot be deleted because it does not exist on the object.

8325 the property value cannot be deleted because it does not exist on the object.

8326 the specified root object cannot be a child reference.

8327 links are not allowed.

8328 Evaluation of links is not allowed.

8329 the operation cannot be performed because the parent class of the object is either uninstantiated or deleted.

8330 A parent class with an alias is not allowed. The alias is the leaf object.

8331 the object and the parent class must be of the same kind, either the original or the copy.

8332 the operation cannot be performed because of the existence of sub-objects. This operation can only be performed on leaf objects.

8333 No directory object was found.

8334 the alias object is missing.

8335 the syntax of the object name is incorrect.

8336 one alias is not allowed to refer to another alias.

8337 aliases cannot be dereferenced.

8338 the operation is out of range.

8340 the DSA object cannot be deleted.

8341 A directory service error occurred.

8342 operations can only be performed on internal master DSA objects.

8343 the object must be a DSA category.

8344 access is not sufficient to perform the operation.

8345 the object cannot be added because the parent class is not on the possible parent list.

8346 access to this property is not allowed because it is in the Security account Manager (SAM).

The 8347 name has too many parts.

8348 the name is too long.

8349 the name value is too long.

8350 the directory service encountered an error sorting name.

8351 the directory service could not find an attribute type with a name.

8352 the name does not recognize an object; the name recognizes an illusion.

8353 the security descriptor is too short.

8354 the security descriptor is invalid.

8355 failed to create a name for the deleted object.

8356 the parent class of a new child reference must exist.

8357 the object must be a naming context.

8358 adding an attribute that does not belong to the system is not allowed.

8359 the category of an object must be structured; you cannot instantiate an abstract category.

8360 the schema object could not be found.

8361 A local object with this GUID (inactive or active) already exists.

8362 the operation cannot be performed on a rear link.

8363 No cross reference for the specified naming context was found.

8364 the operation cannot be performed because the directory service is down.

8365 the directory service request is invalid.

8366 unable to read the role owner property.

8367 the requested FSMO operation failed. Cannot connect the current FSMO box.

8368 it is not allowed to modify DN across a naming context.

8369 this property cannot be modified because it belongs to the system.

8370 only the replicator can perform this function.

8371 the specified category is not defined.

8372 the specified category is not a subcategory.

8373 name reference is invalid.

8374 Cross-references already exist.

8375 deletion of a master cross-reference is not allowed.

8376 only supports subtree notifications on NC headers.

8377 Notification filter is too complex.

8378 failed to update the schema: duplicate RDN.

8379 failed to update the schema: duplicate OID.

8380 Schema update failed: duplicate MAPI identifier.

8381 failed to update the schema: copy the schema id GUID.

8382 Schema update failed: duplicate LDAP display name.

8383 failed to update the architecture: the lower part of the scope is less than the upper part of the scope.

8384 Schema update failed: syntax mismatch.

8385 Schema update failed: attributes are used in must include.

8386 Schema update failed: properties are used in possible inclusions.

8387 Schema update failed: attributes that may be included in do not exist.

8388 Schema update failed: the attribute that must be included in does not exist.

8389 Schema update failed: the category in the secondary category list does not exist or is not a secondary category.

8390 Schema update failed: the category in poss-superior does not exist.

8391 Schema update failed: the category in the subclassof list does not exist or does not meet the hierarchy rules.

8392 failed to update the schema: incorrect Rdn-Att-Id syntax.

8393 Schema update failed: categories are used as secondary categories.

8394 Schema update failed: categories are used as subcategories.

8395 Schema update failed: category is used as poss superior.

8396 the schema update failed while recalculating the validation cache.

8397 Directory tree deletion was not completed. To continue deleting the directory tree, the request must be made again.

8398 cannot perform the requested delete operation.

8399 cannot read the schema record management class identifier.

8400 the syntax of the attribute schema is incorrect.

8401 attributes cannot be cached.

8402 categories cannot be cached.

8403 attributes cannot be removed from the cache.

8404 unable to delete categories from the cache.

8405 unable to read properties with special names.

8406 A required subreference is missing.

8407 sample category properties cannot be retrieved.

An internal error occurred in 8408.

A data error occurred in 8409.

8410 A property GOVERNSID is missing.

8411 A required attribute is missing.

8412 A cross-reference is missing for the specified naming context.

8413 A security check error occurred.

8414 there is no schema loaded.

8415 Schema allocation failed. Please check that the machine does not have enough memory.

8416 failed to get the required syntax for the attribute schema.

8417 Global catalog verification failed. The global catalog is invalid or does not support operation. Some parts of the directory are currently invalid.

8418 the replication operation failed due to a schema mismatch between the servers concerned.

8419 the DSA object was not found.

8420 No naming context was found.

8421 the naming context was not found in the cache.

8422 unable to retrieve child objects.

8423 modification is not allowed for security reasons.

The 8424 operation cannot replace the hidden record.

The 8425 level is not valid.

8426 the attempt to create a rating table failed.

8427 Directory configuration parameters are lost in registration.

8428 the attempt to calculate the address book index failed.

8429 allocation of rating tables failed.

8430 the directory service encountered an internal failure.

8431 the directory service encountered an unknown failure.

8432 root objects require a 'top' category.

8433 this directory server is shut down and cannot accept ownership of the new floating single host operation role.

8434 the directory service does not have the necessary configuration information and cannot determine the ownership of the newly floating single host operating role.

8435 the directory service cannot transfer one or more floating single host operation roles to other servers.

8436 the replication operation failed.

8437 specified an invalid parameter for this replication operation.

8438 the directory service is too busy to complete this replication operation at this time.

8439 the single name specified for this replication operation is invalid.

8440 the naming context specified for this replication operation is invalid.

8441 the single name specified for this replication operation already exists.

8442 the replication system encountered an internal error.

8443 the replication operation encountered database inconsistencies.

8444 cannot connect to the server specified for this replication operation.

8445 the replication operation encountered an object with an invalid example type.

8446 the replication operation could not allocate memory.

8447 the replication operation encountered a mail system error.

8448 replication reference information for the target server already exists.

8449 replication reference information for the target server does not exist.

8450 because it is replicated on another server, the naming context cannot be deleted.

8451 the replication operation encountered a database error.

8452 the naming context is to be deleted or not copied from the specified server.

8453 replication access is denied.

The 8454 version of the directory service does not support the requested operation.

8455 cancel copying the remote procedure call.

8456 the source server currently rejects replication requests.

8457 the target server currently rejects the replication request.

8458 the replication operation failed due to an object name conflict.

8459 the replication source has been reinstalled.

8460 the copy operation failed because one of the required parents was missing.

8461 the replication operation was preempted.

8462 the replication synchronization attempt was abandoned due to lack of updates.

8463 the replication operation was interrupted because the system was shutting down.

8464 the replication synchronization attempt failed because the destination part property setting is not a subsetting of a source part property setting.

8465 the replication synchronization attempt failed because the master replication attempted to synchronize from partial replication.

8466 has contacted the server specified for this replication operation, but the server cannot contact another server needed to complete the operation.

8467 during replica installation, a schema mismatch between the source and build used was detected and the copy could not be installed.

8468 Schema update failed: an attribute with the same connection identifier already exists.

8469 name translation: common handling errors.

8470 name translation: the name cannot be found or there are not enough permissions to see the name.

8471 name translation: input names are mapped to multiple output names.

8472 name translation: the output name was found, but the corresponding output format was not found.

8473 name translation: not fully parsed, only the domain was found.

8474 name translation: pure syntax mapping cannot be performed on the client without being connected online.

8475 A construction att modification is not allowed.

8476 the specified OM-Object category is incorrect for an attribute of the specified syntax.

8477 replication request has been paused; waiting for reply.

8478 the required operation requires a directory service, but no one is available.

8479 the LDAP display name of a category or attribute contains non-ASCII characters.

8480 the requested lookup operation supports only basic lookups.

8481 lookup failed to retrieve properties from the database.

8482 the schema update operation attempted to add a backlink, but the backlink does not have a corresponding forward link.

8483 the source and destination of cross-domain movement are inconsistent on the object date. Either the source or the last version of the target without an object.

8484 the source and destination of cross-domain movement are inconsistent in the current name of the object. Either the source or the last version of the target without an object.

8485 the source and target of inter-domain mobility are the same. The caller should use a local move operation, not an inter-domain move operation.

8486 the source and destination of interdomain movement are inconsistent with the naming context in the forest. The source or destination does not have the latest version of the partitioned container.

8487 the target of cross-domain movement is not the authority of the target naming context.

8488 the source of cross-domain mobility is different from the identity of the source object provided by the target. The source or destination does not have the latest version of the source object.

8489 objects moved across domains should have been deleted by the target server. The source server does not have the latest version of the source object.

8490 another operation that requires special access to PDC FSMO is under way.

8491 Cross-domain movement was not successful, resulting in two versions of the object being moved-one in the source domain and one in the target domain. You need to delete the target object and restore the system to a consistent state.

8492 the object cannot be moved across domains because this type of cross-domain movement is not allowed, or because the object has some characteristics, such as a trust account or a restricted RID; that prevents movement.

8493 once moved, objects with membership cannot be moved across domains, which violates the membership conditions of the account group. Remove the object from the account group membership and try again.

8494 the naming context title must be an immediate subtitle of another naming context title, not a subtitle of an internal node.

8495 because the directory does not have a copy of the naming context above the proposed naming context, the name of the proposed naming context cannot be verified. Make sure that the server that acts as the domain naming host is configured as a global catalog server and that the server and its replication partners are up to date.

8496 the target domain must be in native mode.

8497 the operation cannot be performed because the server does not have an infrastructure container in the specified domain.

8498 it is not allowed to move account groups across domains.

8499 it is not allowed to move resource groups across domains.

The search flag for the 8500 attribute is invalid. The ANR bit is valid only on attributes of Unicode or Teletex strings.

8501 it is not allowed to delete a directory tree from an object with a NC header as a child.

8502 because the directory tree is in use, the directory service failed to lock it in order to delete it.

8503 when deleting a directory tree, the directory service failed to recognize the list of objects to delete.

8505 only an administrator can modify the membership list of an administrative group.

8506 you cannot change the primary group ID of the domain controller account.

8507 attempts to modify the infrastructure.

8508 the following operations are not allowed: add a new mandatory attribute to an existing category; remove a mandatory attribute from an existing category; and add an optional attribute to a special category "Top" that does not return a link attribute, which means directly or through inheritance. For example: add or remove subordinate categories.

8509 Schema updates are not allowed on this domain controller. The registry key is not set, or DC is not the owner of the schema FSMO role.

8510 objects of this category cannot be created under the schema container. Under the schema container, you can only create property schema and category schema objects.

8511 copy / child installation failed to get the objectVersion property of the schema container on the source DC. The property on the schema container does not exist, or the credential provided does not have permission to read the property.

8512 copy / subkey installation failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.

8513 the specified group type is invalid.

8514 Global groups cannot be nested in a mixed domain if the domain is security enabled.

8515 Local groups cannot be nested in a mixed domain if the domain is security enabled.

8516 Global groups cannot have local groups as members.

8517 A global group cannot have a generic group as a member.

8518 A generic group cannot have a local group as a member.

8519 Global groups cannot have cross-domain members.

8520 A local group cannot have another cross-domain local group as a member.

8521 A group that contains a primary member cannot be changed to a safely deactivated group.

8522 Schema buffer load failed to convert the string default value SD on the class schema object.

8523 only DSAs configured as a global catalog server can play the role of domain naming host FSMO.

8524 the DSA operation cannot be performed because of a DNS lookup fault.

8525 when processing an object's DNS hostname change, the service primary name value cannot be synchronized.

8526 failed to read security descriptor properties.

8527 did not find the requested object, but found the object with that key.

8528 the syntax of the link attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7 and 2.5.5.14, while reverse links can only have syntax 2.5.5.1

8529 the security account administrator needs to obtain the startup password.

8530 the security account administrator needs to obtain the startup key from the floppy disk.

8531 the directory service could not be started.

8532 failed to start the directory service.

8533 the connection between the client and the server requires packet confidentiality.

8534 the source domain and the target domain are not in the same forest.

8535 the target domain must be in the forest.

8536 this operation requires that target domain auditing be enabled.

8537 the operation could not find a DC for the source domain.

8538 the source object must be a group or user.

8539 the SID of the source object is already in the target forest.

8540 the source and destination objects must be of the same type.

8542 Schema information cannot be included in a replication request.

8543 the replication operation could not be completed due to schema incompatibility.

8544 the replication operation could not be completed due to the incompatibility of the previous schema.

8545 replication updates cannot be applied because neither the source nor the destination has received information about recent cross-domain startup operations.

8546 the requested domain cannot be deleted because there is also a domain controller that controls this domain.

8547 the requested operation can only be performed on the global catalog server.

8548 Local groups can only be members of other local groups in the same domain.

8549 the key member of external security cannot be a member of a generic group.

8550 for security reasons, properties cannot be copied to GC.

8551 due to too many modifications currently being processed, the checkpoint of PDC cannot be taken.

The 8552 operation requires that source domain auditing be enabled.

8553 Security primary objects can only be created in the domain naming environment menu.

8554 the service principal name (SPN) cannot be built because the hostname format provided is not appropriate.

8555 the filter has passed the properties of the build.

8556 the value of the unicodePwd attribute must be enclosed in double quotes.

8557 your computer cannot join the domain. The maximum number of computer accounts allowed to be created on this domain has been exceeded. Please contact your system administrator to reset or increase this limit.

8558 for security reasons, the operation must be run on the target DC.

8559 for security reasons, the source DC must be Service Pack 4 or later.

8560 the critical Directory Service system object cannot be deleted during a tree directory deletion operation. The numeral deletion operation may have been carried out only partially.

9001 the DNS server cannot interpret the format.

9002 DNS server failed.

9003 DNS name does not exist.

9004 the name server does not support DNS requests.

9005 denies the DNS operation.

9006 DNS names that should not exist still exist.

9007 DNS RR sets that should not exist still exist.

9008 the DNS RR set that should exist does not exist.

9009 the DNS server has no authority over the zone.

9010 the DNS name in the update or prereq is not in the zone.

9016 DNS signature verification failed.

9017 DNS incorrect key.

9018 DNS signature verification expires.

9501 No records were found for the DNS query.

9502 invalid DNS package.

9503 there is no DNS package.

9504 DNS error, please check rcode.

9505 is an insured DNS bag.

9551 invalid DNS type.

9552 invalid IP address.

9553 invalid attribute.

9554 try the DNS operation again later.

9555 the name and type of record given are not single.

9556 the DNS name does not conform to the RFC description.

9557 DNS name is a fully qualified DNS name.

9558 the name of DNS is "." Separate (multi-label).

9559 the DNS name is a single part name.

9560 the DNS name contains invalid characters.

9561 DNS names are completely numeric.

9601 the DNS area does not exist.

9602 DNS area information is invalid.

9603 invalid DNS region operation.

9604 invalid DNS zone configuration.

The 9605 DNS region does not have the beginning of an authority record (SOA).

The 9606 DNS zone has no record of "name server" (NS).

9607 the DNS area is locked.

9608 DNS region creation failed.

9609 the DNS area already exists.

9610 the DNS automatic region already exists.

9611 invalid DNS region type.

The primary DNS address is required for the 9612 secondary IP area.

The 9613 DNS area is not secondary.

9614 requires a secondary IP address

9615 WINS initialization failed.

9616 A WINS server is required.

9617 NBTSTAT initialization call failed.

9618 invalid Authority initiation (SOA) deletion

9651 data files are required for the main DNS area.

9652 invalid data file name for the DNS area.

9653 failed to open the data file for the DNS area.

9654 failed to write data file for DNS area.

9655 failed to read the data file for the DNS area.

9701 DNS record does not exist.

9702 the format of the DNS record is incorrect.

9703 Node creation failed in DNS.

9704 unknown DNS record type.

9705 DNS record timed out.

9706 the name is not in the DNS area.

9707 A CNAME loop was detected.

The 9708 node is a CNAME DNS record.

9709 A CNAME record with the specified name already exists.

9710 the record is not in the root directory of the DNS area.

9711 the DNS record already exists.

9712 secondary DNS area data error.

9713 cannot create DNS cache data.

9714 DNS name does not exist.

9715 cannot create a PTR record.

9716 the DNS domain was not deleted.

9717 the directory service is invalid.

The 9718 DNS zone already exists in the directory service.

9719 the DNS server did not create or read startup files for the directory service collection DNS area.

9751 complete DNS AXFR (area replication).

9752 DNS region replication failed.

9753 added a local WINS server.

9801 the security update call needs to continue with the update request.

9851 TCP/IP does not have a network protocol installed.

9852 there is no DNS server configured for the local system.

10004 A blocking operation was interrupted by a call to WSACancelBlockingCall.

10009 the file handle provided is invalid.

10013 makes an attempt to access sockets in a way that access permissions are not allowed.

10014 the system detected an invalid pointer address when trying to use a pointer parameter in a call.

10022 provided an invalid parameter.

10024 too many sockets are open.

10035 cannot immediately complete a non-blocking socket operation.

10036 A blocking operation is currently being performed.

10037 attempts an operation that is already in progress on a non-blocking socket.

10038 attempted an operation on a non-socket.

10039 the requested address is ignored from the operation in a socket.

10040 A message sent on a Datagram socket is larger than the internal message buffer or some other network limit, or the buffer used by the user to receive the Datagram is smaller than the Datagram.

10041 one of the protocols specified in the socket function call does not support the syntax of the requested socket class.

10042 an unknown, invalid, or unsupported option or hierarchy specified in a getsockopt or setsockopt call.

10043 the requested protocol has not been configured in the system, or there is no sign that it exists.

10044 there is no support for the specified slot type in this address family.

10045 the type of object referenced does not support the attempted operation.

The 10046 protocol family has not been configured into the system or there is no sign of it.

10047 an address that is not compatible with the requested protocol is used.

10048 usually each socket address (protocol / network address / port) can only be used once.

10049 the address of the request is not valid in its context.

The 10050 socket operation encountered a dead network.

10051 attempted a socket operation to an unreachable network.

10052 when the operation is in progress, the connection is interrupted because a fault is detected by the keep-active operation.

10053 the software in your host has abandoned an established connection.

10054 the remote host forced an existing connection to be closed.

10055 the operation on the socket cannot be performed because the system buffer space is insufficient or the queue is full.

10056 makes a connection request on a connected socket.

10057 requests to send or receive data are not accepted because the socket is not connected and does not provide an address (when sending a Datagram socket using a sendto call).

10058 due to previous close calls, the socket has been closed in that direction, and requests to send or receive data are not accepted.

10059 there are too many references to a kernel object.

10060 the connection attempt failed because the connecting party did not reply correctly or the connected host did not respond after a period of time.

10061 cannot make any connection because the target machine actively rejects it.

10062 the name cannot be translated.

10063 the name component or the name is too long.

10064 the socket operation failed because the target host was down.

The 10065 socket operation attempts an unreachable host.

10066 you cannot delete a directory unless it is empty.

10067 A Windows socket operation may have a limit on the number of applications that can be used simultaneously.

10068 exceeds the limit.

10069 exceeds the disk limit.

10070 the file handle reference is no longer valid.

10071 items are not available locally.

10091 because the system it uses to provide network services is currently invalid, WSAStartup is currently not working properly.

10092 the requested Windows socket version is not supported

10093 the application did not call WSAStartup, or WSAStartup failed.

10101 returned by WSARecv or WSARecvFrom indicates that the remote side has started the shutdown step.

10102 WSALookupServiceNext cannot return more results.

10103 when you process this call, you start calling WSALookupServiceEnd. The call was deleted.

10104 the procedure call is invalid.

10105 the requested service provider is invalid.

10106 the requested service provider is not loaded or initialized.

10107 system calls that should never have failed have failed.

10108 there is no known service for this. The service could not be found in the specified namespace.

10109 the specified category was not found.

10110 WSALookupServiceNext cannot return more results.

10111 when you process this call, you start calling WSALookupServiceEnd. The call was deleted.

10112 data query failed due to rejection

The above is all the contents of what the sql server error number means. Thank you for reading! Hope to share the content to help you, more related knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.