Shulou(Shulou.com)06/03 Report--

This article focuses on "how to solve the errors when Internet connection sharing access is enabled", interested friends may wish to take a look. The method introduced in this paper is simple, fast and practical. Let's let the editor take you to learn how to solve the error when Internet connection sharing access is enabled.

First try to turn on and off the flight mode and restart the network card, if you can solve the problem, you don't need to watch it. If it doesn't work out, just keep looking.

The laptop is hot and the phone can't be searched. Check the network adapter in the settings and find that both Ethernet and locally connected ipv4 and ipv6 automatically obtain IP addresses (this is correct).

As shown in the following figure:

Then check the properties of Ethernet and find that the previous configuration in the share is lost, and when configuring (the configuration method is right-click Ethernet 2, click Properties, and then click share on the pop-up page)

The following interface prompt appears: "Internet connection sharing is currently enabled for connection 'ethernet_32774'. It will now be enabled for' Ethernet 2'." (most of the errors are similar)

Click OK. Error "an error occurred when Internet connection sharing access was enabled. (null)." As shown in the following figure

The solution is as follows:

1. Previously, sharing was configured in the properties of Ethernet 2. Now it is found that there is a mistake in the configuration. We can directly find "Local connection * 12" (you can choose one at will, not Ethernet 2, and the name may vary). As shown in the following figure, configure sharing in the "Local connection * 12" attribute. You can select any one in the drop-down box.

2. Then configure sharing in the properties of Ethernet 2. If there is an option in the drop-down box is "Local connection * 12". Then there should be no problem with configuration. Just restart the flight mode. But I have the following phenomenon. The option is selected as "WLAN" and cannot be changed.

3. We just click on the check mark above, cancel the sharing, and then make sure to exit the interface. As shown in the following figure

4. Finally, re-enter the properties of Ethernet 2 to configure sharing, as shown in the following figure. At this point, the drop-down box can be selected.

5. Click OK and exit to see if the phone can find hot spots. If not, check to see if ipv4 and ipv6 in the local connection * 12 and Ethernet 2 properties network automatically obtain ip. To get the ip automatically. The following figure shows that the ipv4 of the local connection * 12 is not automatically obtained.

6. After the check is complete, see if the phone can search for notebook or computer hotspots. If it still doesn't work, turn on the flight mode and turn it off to restart the network card. As shown in the following figure

At this point, I believe you have a deeper understanding of "how to solve the error when Internet connection sharing access is enabled". You might as well do it in practice. Here is the website, more related content can enter the relevant channels to inquire, follow us, continue to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.