Shulou(Shulou.com)06/02 Report--

This article is about how to use telnet. The editor thought it was very practical, so I shared it with you as a reference. Let's follow the editor and have a look.

How to use telnet: first, click to enable or close the Windows function; then check the Telnet client and click OK; then open the command prompt and enter "telnet ip address port"; finally, enter the representative port to open, and the connection failure means that the server port is not open.

How to use telnet:

The first step is to turn on the telnet function of the computer, go to the uninstall program interface, and click to enable or disable the Windows function, as shown in the following figure:

Step 2. After entering, check the Telnet client and click OK, as shown in the following figure:

Step 3. After enabling the telnet function, search for a command prompt to run as an administrator, as shown in the following figure:

Step 4, after entering, enter "telnet ip address port", as shown in the following figure:

Step 5, after pressing the enter key, the interface shown in the following figure appears, indicating that the port is open, as shown below:

Step 6. If the connection fails, it means the server port is not open, as shown in the following figure:

Thank you for reading! On the use of telnet to share here, I hope the above content can be of some help to you, so that you can learn more knowledge. If you think the article is good, you can share it and let more people see it.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.