Shulou(Shulou.com)06/03 Report--

1) regularly, clean up the dust in the computer, open the chassis after the desktop is turned off, and blow with a hair dryer and cold air.

2) try not to put files or shortcuts on desktops and system disks, and uninstall useless software

3) usually use 360Guardian, Jinshan Guardian and other tools to clean up the system garbage and temporary files generated by the Internet (ie cache) to detect and kill malware.

4) antivirus software accounts for a small amount of resources, such as nod32, or only one auxiliary antivirus software.

5) set ip to static ip as far as possible, which can reduce the boot time of the computer and the reaction time after entering the desktop. (cqjiangyong summary:

This is the reason why many people's computers can't move in the first few minutes after booting up. (6) do not put too many files and icons on the computer desktop, which will slow down the computer response. Try not to install the software on disk C.

6) close some startup programs. Start-run-enter msconfig- to determine-click start in the system configuration Utility window-start

Except for input method (Ctfmon) and antivirus software, general programs can be turned off. You can also use 360 and other software to intelligently optimize boot acceleration.

7) it is recommended to install only one main antivirus software, which will take up computer resources and make the computer slower.

8) regularly defragment the disk, open the drive of my computer to defragment the disk-Properties-tools-Select the defragmented disk to open

Disk Defragmenter window-analyze-defragment-the system begins to defragment.

9) the startup speed of Windows is relatively fast at the initial stage of system installation, but with the increasing number of installed software

The startup speed of the system will be slower and slower, because a lot of software adds itself to the startup program, so it needs to be run as soon as it starts.

It not only greatly reduces the startup speed, but also takes up a lot of system resources. For some programs like this

We can exclude them from the startup suite through the system configuration utility Msconfig.

Choose run from the start menu, and type Msconfig in the run dialog box

After you enter, the system configuration Utility dialog box pops up, and select the Startup tab (figure 1)

This tab lists the projects and sources that are loaded when the system starts, and carefully check whether each project needs to be loaded automatically

Otherwise, clear the check box before the project, and the fewer projects are loaded, the faster you start. A reboot is required to take effect after the setup is completed.

10) reduce the wait time for boot disk scan

When the restart caused by abnormal shutdown or crash is recorded in the Windows log

The system automatically runs ScanDisk at startup. By default

Wait 10 seconds before scanning each partition, if each partition has to wait 10 seconds to start scanning

Coupled with the time required for the scan itself, it will take a long time to complete the startup process.

In this case, we can set the waiting time to cancel the disk scan, or even disable the scanning of a disk partition.

Select "start → run" and type "chkntfs / chkntfs 0" in the run dialog box to set the disk scan wait time to 0

If you want to ignore scanning a partition, such as disk C, when the computer starts, you can enter the "chkntfs / x c:" command

If you want to restore the scan of disk C, you can use the "chkntfs / d c:" command to restore all chkntfs default settings

In addition to the countdown to automatic file checking

11) optimize servic

Reducing the startup items can not improve the occupation of system resources in the true sense, and the source of the occupation of system resources is the system services. therefore, according to its own situation, reasonably disabling system services can effectively improve the performance of the system. and will not have any impact on the system and software.

Method: start one > administrative tools-service-double-click the service to be disabled-startup type select "disable"-> OK

Select "start → run input" or win+R enter services.msc

Services that can be disabled:

Remote Registry remotely modifies the list table and does not need it at all

Enable process under Secondary Logon replacement credential

SSDP Discovery enables UPNP devices on home networks

IP Helper if you are not an IPV6 user, please feel free to disable it

IPsec Policy Agent uses and manages IP security policies

System Event Notification Service records the time of the system, and usually no one goes back to read it.

Windows Error Reporting Service it is not an example to submit a report when there is an error in the system, and there is no one to help you if you submit it. Distributed Link Tracking Client

BitLocker Drive Encryption Service

HomeGroup Listener

HomeGroup Provider

NMIndexingService installs processes that are unique to Nero and can be disabled

Offline Files

Print Spooler with printers can be disabled.

The above prohibited services are relatively conservative, and if you are not satisfied, you can optimize them according to your own situation.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.