Shulou(Shulou.com)06/03 Report--

This article shares the trial experience of Mir zynq7010 development board.

The early stage is mainly focused on the development of the PL part of Z-TURN, in order to understand the logical architecture of the chip and the system bus, as well as all the peripherals. Later, at the beginning of the development of the PS part, let alone gossip, first look at the system block diagram of the entire 7z010. All the development is currently set up based on ISE14.6. You can see the bus connection between PL and PS and the peripheral resources of PS and PL in the software, according to the schematic provided by Mill. Find the control pin that controls the RGB LED and write a RGB LED flashing veriloG code that successfully makes the RGB LED flicker.

During the study of this board, it was found that the development board could develop NANDFLASH, but Mill did not post it, if he had time later, he would be ready to weld a magnesium NANDFLASH to do data storage.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.