Shulou(Shulou.com)06/01 Report--

This article mainly introduces the Win10 20H2 Beta preview version 19042.541 how to download KB4577063 update, has a certain reference value, interested friends can refer to, I hope you can learn a lot after reading this article, the following let the editor take you to know about it.

System version before ▼ UPDAT

Win10 20H2 Beta Preview 19042.508

2020-09 Cumulative Update for Windows 10 Version 20H2 for x64-based systems (KB4571756)

▼ update preparation:

◆ Select Preview experience member Settings: Beta Channel

◆ check and repair Win10-2004 Build 19042.508 system

Enter the sfc / SCANNOW command in the command prompt (administrator) window, press the enter key on the keyboard, and wait for it to finish, indicating that resource protection has not found any integrity violations.

◆ download:

2020-09 Cumulative Update for Windows 10 Version 20H2 for x64-based systems (KB4577063)

Status: downloading 0% ~ 100%

◆ installation:

When the download is complete, it displays:

2020-09 Cumulative Update for Windows 10 Version 20H2 for x64-based systems (KB4577063)

Status: waiting for installation

Click: install now

2020-09 Cumulative Update for Windows 10 Version 20H2 for x64-based systems (KB4577063)

Status: 0% ~ 100% being installed

◆ restart:

2020-09 Cumulative Update for Windows 10 Version 20H2 for x64-based systems (KB4577063)

Status: waiting for restart

Click: restart now

▼ update

After clicking on the computer restart, you will actually enter the configuration update, which is displayed as follows:

Configuring updates

Status: 0% ~ 30% completed

When the configuration is updated to 30%, the computer will restart, and the configuration update will continue after the restart.

Status: 30% ~ 100% completed

▼ checks the upgraded system version

The upgraded version of the system is:

2020-09 Cumulative Update for Windows 10 Version 20H2 for x64-based systems (KB4577063)

Version 20H2 (OS build 19042.541)

The update went very smoothly and there were no problems.

Add: update content of Win10 20H2 Build 19042.541:

Fixed an "element not found" error when WSL could not start.

A notification has been added to Internet Explorer 11 informing users that support for Adobe Flash will end in December 2020.

The ability of the system to detect when the Microsoft Edge IE mode stops responding is enhanced.

Fixed an issue where the language bar could not occur when a user logged in to a new session in some cases. This can happen even if the language bar is configured correctly.

Fixed failure to recognize the first East Asian language character entered in Microsoft Foundation Class Library (MFC) DataGrid.

Fixed an issue that prevented you from reconnecting to a previously closed session because the session was in an unrecoverable state.

Fixed an issue that caused games using spatial audio to stop working.

Fixed that obsolete user profiles could not be deleted when you were using profile cleanup Group Policy objects (GPO).

Fixed failure in selecting "I forgot my password" from Settings > account > Login options in Windows Hello for Business On-Premise deployment.

Updated the 2021 time zone information for Fiji.

Fixed an issue that affected the ability of Microsoft's System Centre Operations Manager (SCOM) to monitor customer workloads.

Fixed an issue that caused random line breaks when you redirected PowerShell console error output.

Fixed a problem with creating HTML reports using tracerpt.

Allow DeviceHealthMonitoring Cloud Service Plan (CSP) to run on Windows 10 Business and Windows 10 Pro versions.

Fixed an issue that prevented content under HKLM/Software/Cryptography from happening during Windows feature updates.

Fixed an access violation in lsass.exe when starting a process with the runas command in some cases.

Fixed an issue where the Windows Defender application controls the enforcement of package family name rules that should only be audited.

Fixed an error indicating that the smart card PIN change was not successful even if the PIN change was successful.

Fixed possible creation of duplicate foreign security master objects in domain partitions for authenticated and interactive users. Therefore, the configuration file (.cnf) of the original object is corrupted. This problem occurs when you use the CriticalReplicationOnly flag to promote a new domain controller.

Updated the configuration of Windows Hello face recognition to make it work well with the 940nm wavelength camera.

The distortion and distortion of Windows hybrid reality head-mounted display (HMD) are reduced.

Ensure that the new Windows mixed reality HMD meets the minimum specifications and defaults to the 90Hz refresh rate.

Fixed a stop error on the Hyper-V host when the virtual machine (VM) issued a specific small computer system interface (SCSI) command.

Fixed an issue that could cause attempts to bind sockets to shared sockets to fail.

Fixed an issue where the network icon incorrectly displays "No Internet access" in the notification area when the application uses Windows API to check the Internet connection, which may prevent the application from opening or cause other errors. This problem occurs if you disable active detection of the network connection status indicator (NCSI) using group policy or local network configuration. This can also occur if active probes fail to use proxies and passive probes fail to detect Internet connections.

Fixed an issue that prevented Microsoft Intune from synchronizing on devices configured with a service provider (CSP) using virtual private network version 2.

When a virtual private network connection is detected, the upload and download of the peer device are suspended.

Fixed an issue that prevented Microsoft Internet Information Services (IIS) management tools, such as IIS Manager, from managing ASP.NET applications that configure SameSite cookie settings in web.config.

Fixed a problem with ntdsutil.exe so that you could not move active Directory database files. The error is "failed to move the file, source and destination error 5 (access denied)".

Fixed an issue where lightweight Directory access Protocol (LDAP) sessions were incorrectly reported in event ID 2889. This occurs when LDAP sessions are authenticated and sealed using simple authentication and security layer (SASL) methods.

Fixed an issue that could cause Credential Guard-enabled Windows 10 devices to fail to authenticate requests while in use.

Restored the construction properties in msDS-parentdistname 's active Directory and active Directory lightweight Directory Service (AD LDS).

Fixed an issue that caused queries for large keys on Ntds.dit to fail with the error "MAPI_E_NOT_ENOUGH_RESOURCES". This issue may cause users to see limited conference room availability because the Exchange Messaging application programming interface (MAPI) cannot allocate additional memory for meeting requests.

Fixed an issue where online Certificate status Protocol (OSCP) responder audit events (5125) were intermittently generated to indicate that the request had been submitted to the OCSP responder service. However, the serial number or domain name (DN) of the requested issuer is not mentioned.

Fixed an issue where strange characters were displayed in front of the day, month, and year fields output by the console command.

Fixed an issue that caused lsass.exe to stop working, triggering a system restart. This problem occurs when invalid restart data is sent with a non-critical paging search control.

Fixed events 4732 and 4733 where domain-local group membership changes could not be logged in some cases. This happens when you use the allow modifications control; for example, the active Directory (AD) PowerShell module uses the control.

Fixed an issue with the Microsoft Cluster Shared Volumes File Systems (CSVFS) driver that prevented Win32 API from accessing SQL Server Filestream data. This occurs when data is stored on a cluster shared volume in a SQL Server failover cluster instance, which is located on an Azure virtual machine.

Fixed an issue that caused deadlocks when Offline Files was enabled. Therefore, CscEnpDereferenceEntryInternal holds parent and child locks.

Fixed an issue where deduplication jobs failed and a stop error 0x50 occurred when you called HsmpRecallFreeCachedExtents ().

Fixed an issue that caused applications to stop working when using Microsoft's remote Desktop sharing API. The breakpoint exception code is 0x80000003.

Removed the HTTP call to www.microsoft.com by the remote Desktop client (mstsc.exe) when checking out when using the remote Desktop Gateway.

Fixed an issue evaluating the compatibility status of the Windows ecosystem to help ensure compatibility of all Windows updated applications and devices.

Added support for some new Windows hybrid reality motion controllers.

Fixed an issue that caused applications using dynamic data Exchange (DDE) to stop responding when you tried to close the application.

Added an Azure active Directory (AAD) device token that will be sent to the Windows update (WU) as part of each WU scan. WU can use this token to query the membership of a group with AAD device ID.

Fixed a problem using the restrict credential Authorization mode to set the restrict Authorization to remote servers group policy on remote Desktop Protocol (RDP) clients. Therefore, Terminal Server Services will first try to use the require remote credential daemon mode, and use requirement restriction Management only if the server does not support require remote credential daemon.

Thank you for reading this article carefully. I hope the article "how to download KB4577063 updates in 20H2 Beta Preview 19042.541 in Win10" shared by the editor will be helpful to you. At the same time, I also hope you will support us and follow the industry information channel. More related knowledge is waiting for you to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.