Shulou(Shulou.com)06/01 Report--

This article is about how to add a second IP address to your computer. I think it is very practical, so I share it with you. I hope you can get something after reading this article. Let's take a look at it.

With the popularity of the Internet, more and more computers are connected to the Internet. In fact, there is an IP address on all computers that have access to the Internet, but sometimes it is necessary to add another IP address to the computer due to special needs, such as an IP address to access the Internet and another IP address to access the internal office network of the organization. The following steps will teach you how to configure a second IP address on your computer.

1. Click the "Network and Internet" button in the Control Panel, as shown in the red box below.

2. Then click "View Network status and tasks", as shown in the following figure.

3. Click the left column "change Adapter Settings", as shown in the following figure.

4. Then double-click the icon of the network card that needs to view the IPv6 address with the left mouse button, as shown in the following figure, "Local connection".

5. Click the "Properties" button of "Local connection status", as shown in the red box below.

6. Then double-click the contents in the red box below with the left mouse button.

7. In the following figure, you can see that the network card already has a 10.1.1.1 IP address. Then click the Advanced button in the red box.

Click the "add" button in the red box below.

9. Then fill in the second IP address and its subnet mask in the upper and lower red boxes in the following figure, and finally click the "add" button. Click the "OK" button along the way, and the second IP address of the network card will be added successfully!

10. Finally, you can see the content of the second IP address added in the "Advanced TCP/IP Settings", as shown in the red box below.

Alternatively, you can view the configured second IP address from the CMD command line of the Win 7 operating system. Enter the command "ipconfig" at the Command prompt, and enter as shown in the following figure.

twelve

From the red box in the following figure, you can see the second IP address "172.16.1.1" of the "Local connection" network card.

Matters needing attention

Configure two IP addresses on a network card, the configuration and operation principle are more complex, and it is difficult to understand, non-professionals should not configure on the computer, so as not to cause the computer to access the Internet.

The above is how to add a second IP address to the computer. The editor believes that there are some knowledge points that we may see or use in our daily work. I hope you can learn more from this article. For more details, please follow the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.