Shulou(Shulou.com)06/02 Report--

The ubantu system was installed on the server for the first time

First of all, let's boot into the mini BIOS to set RAID, or enter the server management system to set RAID in the BIOS of the system.

When you see it appear when you turn it on.

Press Ctrl+r to enter the mini BIOS

Mini BIOS interface

Go to the VG MGMT menu first, and you can switch menus with ctrl+N and ctrl+P

Press F2 to expand the virtual disk creation menu

If you reinstall, select clear config first, then create a virtual disk (Create Nes VD)

RAID Level: select RAID 5

Select all three disks in Physicaldisks, and what it looks like after operation

Because after dividing the RAID5, the total size of the hard disk still has 6TB, and BIOS startup is not supported when it is larger than 2TB, so first divide the system into small disks to install the system.

I set 0.466T

Next, just choose ok.

Press CTRL+N to switch to the PD MGMT menu and you can see that the status of the disk is online.

Just press the ESC key to exit and restart

Install the following

Enter this interface

Press f10 to go directly to the server management system lifecycle controller

Select OS deployment

One operation

There is an operating system available in this step. You can choose the type of operating system you have installed. If it is not available, choose other system.

The next step is to find the media on which the system is installed

And then the next step

Finally, after rebooting, you will install your system directly.

Next, I will start to introduce the problems that may arise in the installation system and solve them.

1. The first problem I encountered was that when deploying os, the prompt could not be used in the fourth step of the system media, if she had the following prompt

Just click the cancel button, go to the lifecycle main interface and select the system settings.

Click Advanced hardware configuration

Enter the system BIOS

Click on the integrated device

Open all usb ports and enable usb3.0

After this setting, he can find your media.

If she still can't find your flash drive, there's another way.

Is to enter directly from boot manage r.

The following is the procedure:

Restart the system directly, and then press f11 in this interface

Then choose one-shot bios menu.

The last one is my flash drive. Click directly into it and you can install it directly.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.