Shulou(Shulou.com)06/01 Report--

In this issue, Xiaobian will bring you about how to install LSI RAID card drive mount when Linux system is installed. The article is rich in content and analyzed and described from a professional perspective. After reading this article, I hope you can gain something.

When we use the new ASA to install Linux, we usually encounter the problem that RAID cannot be read in the installation system interface. In this case, we have to consider the reasons for the built-in driver package of the Linux system. This article will share with you LSI 9361 to install RHEL6.2 as an example.

1. Put the driver files into the USB flash drive (dd.iso), and then connect the system installation CD and the USB flash drive with the driver files into the USB port of the server at the same time.

2. Start the installation interface, press the Tab key when you reach the following position

Figure 1 System installation interface

3. Enter "linux dd blacklist=iscsi blacklist=ahcinodmraid" in the figure below, and then press Enter to enter the system installation.

Figure 2 Input driver mount parameters

4. When the word boot appears, type "linux dd" after it.

Figure 3 Enter "linux dd"

5. Do you have a driver disk? ", select"Yes"and enter

Figure 4 Asking if there is a driver

6. Select the location of the driver on the specified USB drive and select the "dd.iso" file

Figure 5 Select USB flash drive where driver is located

Figure 6 Select the disk partition where the driver resides

Figure 7 Select driver file

7. The system will ask if there are any additional drivers to load. If there are no additional drivers to load, select "no" here.

Figure 8: Do you need to "load any more drivers"

8. Select device type as "Specialized Storage Devices"

Figure 9 Device type selection

9. RAID under SAS card is recognized normally, and the installation of the system can be started.

Figure 10 RAID Normal Identification

Linux is a free-to-use and freely distributed UNIX-like operating system, is a POSIX-based multi-user, multitasking, multi-threaded and multi-CPU operating system, using Linux to run major Unix tools, applications and network protocols.

The above is how to install Linux system LSI RAID card drive mounted, if there is a similar doubt, may wish to refer to the above analysis to understand. If you want to know more about it, please pay attention to the industry information channel.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.