Shulou(Shulou.com)05/31 Report--

This article will explain in detail what to do about the blue screen caused by the poor cpu heat dissipation of the windows computer. The editor thinks it is very practical, so I share it with you for reference. I hope you can get something after reading this article.

[failure phenomenon]

A computer often dies when saving files, and there is always a blue screen error when reinstalling the operating system, whether it is Windows XP or Windows 7, and the time of the blue screen error is different each time.

[fault analysis]

The fault is analyzed as follows.

(1) the hard disk is checked for virus and found that there is no virus.

(2) use the replacement method to verify that there is no problem with the memory, motherboard, video card and power supply.

(3) after testing, it is found that the temperature of CPU rises in a straight line during the installation of the system, until the blue screen appears in the system. This shows that the CPU does not dissipate heat well, which causes the CPU to shut down automatically due to the increase of temperature after the system has been running for a period of time, which leads to the blue screen failure of the system.

(4) it is found that the contact between CPU and heat sink is not good.

[troubleshooting]

(1) remove the CPU and wipe off all the original silica gel on its surface and the surface of the cooling fan.

(2) after reinstalling the CPU, apply a thin layer of silica gel evenly on the metal shell of the CPU core ([be careful] not to apply too thick, otherwise it will hinder heat dissipation).

(3) install the CPU fan correctly and install a chassis fan on the chassis.

(4) turn on the power supply, turn on the computer, and everything is running normally. The system successfully completed the installation and troubleshooting.

[summary of experience]

Due to the poor heat dissipation of CPU, there are many computer failures caused by CPU entering the self-protection state, which usually causes the computer to restart or blue screen from time to time, or the computer running speed drops suddenly. What they have in common is that if the computer has a longer standby time, the failure will occur later when it is run again. These are usually caused by the failure of CPU cooling equipment. For example, the speed of the CPU fan slows down, and the heat dissipation silica gel is not in place.

This is the end of the article on "what to do with the blue screen caused by the poor cpu heat dissipation of windows computers". I hope the above content can be of some help to you, so that you can learn more knowledge. if you think the article is good, please share it out for more people to see.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.