Shulou(Shulou.com)06/02 Report--

Install the operating system and back it up as an image file

1. First install the operating system, and then use the ghost tool to make a full mirror backup of the master disk. (select disk to image)

two。 After the mirror backup, you can set up Chenglong net engraving tool to carry out screen engraving.

Download Chenglong screen engraving tool http://www.downxia.com/downinfo/32350.html

Before running the network engraving tool as an administrator, please prepare a separate network switch in advance and connect the host that needs to be a server to the switch. Connecting the switch alone is mainly to avoid dhcp interference in the local area network.

Ps: you need to run the software with administrator privileges, otherwise you will report that the dhcp server cannot be initialized.

1)。 First of all, choose full cloning.

2)。 Click-start engraving after setting the backup image path

3)。 Here we need to select the real physical network card connected locally, select the network card and click the DHCP server button.

4)。 Change the IP address pool to the same network segment as the local real physical Nic, and then click Save.

Two. set up the client

(restart the computer to enter the BIOS setting, and set the first startup item to start from the network.)

1. Next, we connect multiple clients that need to install the system on the switch connected to the engraving server, and set up PXE network startup in BIOS. There are many versions of BIOS, and the settings are different. Whether you can set them or not depends on your technology and whether the motherboard supports PXE startup. If it is a motherboard from 10 years ago, it is possible not to support it.

two。 If it goes well, it will enter the state shown in the picture. It is also waiting, waiting for the server to click "send"

3. Finally we went back to the server, which had already sensed the connection of the client and had been communicating for a long time. All I have to do is click "send" manually.

4. Under normal circumstances, the system can enter the system normally after it has been restored.

Matters needing attention:

If you choose full clone when cloning, the client hard disk does not need to be partitioned.

If you choose to clone disk c, you need to partition the client.

When making an image, it is best not to install the device driver, so as not to enter the system due to the incompatibility of the driver after recovery.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.