Shulou(Shulou.com)06/02 Report--

Introduction: it is a virtual PC software, which can virtualize a new hardware environment on the existing operating system, which is equivalent to simulating a new PC, so as to realize running two independent operating systems on one machine at the same time.

Link: https://pan.baidu.com/s/1XaL0ybtT155SClYw_VZANg extraction code: cdv3

Installation steps:

1. Click the application to install

2. This screen will appear as shown in the figure, and click next.

3. Then the user agreement will appear. Browse it and choose to accept it, and then click next.

4. Next, there will be a custom installation interface, where you can choose the location of the installation. Keep in mind that Chinese cannot appear in the path. The following "enhanced" option is not recommended and will take up a certain amount of memory.

5. Then the user experience settings interface will appear in the next step, so don't even select it if you mind.

6. The "Shortcut" interface will appear in the next step. After all is selected, the next step

Then wait for the installation.

7. after installation, the following interface will appear, do not click finish directly; select the license option to activate the software

8. Next go to the input key interface and go to the previous folder. Find the "Activation key" and click on it, select any one to copy and paste into the "enter license key" interface, click "enter", and the installation is complete.

9. Next, take a look at the network, open the Network and sharing Center in the network, and click "change Adapter Settings".

10. After clicking "change Adapter Settings", you will find that there are two more network cards. Leave them alone for the time being.

11. Next, create a virtual machine, click "VMware" and you will see the welcome screen as shown in the picture. Click "create a new virtual machine".

12. When you click on it, you will see the first-come interface, and select the "Custom" option.

13. After the next step, you will see that you can select "Virtual Machine hardware compatibility" interface, which contains all the previous versions. Select the 14 generations currently installed. It is recommended that the creation do not exceed the red zone limit.

14. Click next to enter the "install client system" interface, and you can go to the image file of the next system on the Internet. Here is an example of Windows 10.

15. Then here, you can set up your own user name, and you don't have to set up the rest for the time being.

16. After clicking the next step, the interface shown in the figure will appear. Do not enter the key for the time being.

17. Below, you will enter the "named virtual machine" interface, where you can name and set the storage location of the virtual machine. (note: Chinese shall not appear in the storage location)

18. Next, "firmware type" option, select "UEFI" option

19. Next, we will enter the processor configuration interface, where the model can allocate resources to the virtual machine according to the hardware conditions of the PC.

20. After the processor is allocated, the virtual machine memory can be allocated according to its recommendation to allocate 2GB, or the recommended maximum to allocate 13.4GB.

21. Then set "Network connection" Select "to use Network address Translation (NAT)"

22. The following is the configuration of the input and output of the hard disk. Choose the recommended one.

23. Then select the type of disk to create and choose the recommended one

24. The next step is to create a disk. After all, it is a virtual machine, which belongs to "create a new virtual disk".

25. The following is to specify the disk capacity. According to its recommendation, set the disk size to 60GB, and select "split the virtual machine into multiple files", which makes it convenient for the virtual machine to copy and move between computers.

26. The specified disk files will appear below. Note here that they must be placed in the folder you created before, so that you don't have to delete them together in the future.

27. Click next, and the virtual machine has been created. You can see all kinds of information just created. Click finish to wait for its installation.

28. The web prompt will appear after installation, click Yes

At this time, you will find that there is only one icon on the Zhuo noodle. Right-click the mouse on the desktop to open the personalization, and you will find that it needs to be activated.

29. The activation tool can go to the Internet to find resources to activate Windows. Here you will see "oem10.exe", which can be executed directly.

30. Double-click the above file to see the picture, just click activate

In this way, it will be activated, and then you can open the personalization to set it up, and you can light up all the desktop icons.

31. Next, let's take a look at the establishment of communication between the virtual machine and the host. First, take a look at the IP address of the virtual machine, click on the lower left corner of the desktop to search and enter the "cmd" command prompt.

32. Enter "ipconfig" here, and you will see the following figure:

33. At this time, the virtual machine is connected to the network. You can take a look at the "NAT" mode used to configure the virtual machine. So if you want to communicate directly between the virtual machine and the host, take a look at the network adapter at the lower right of the virtual machine, click on the settings in "Network Adapter" and change the network connection mode to host-only mode.

34. At this time, the network of the virtual machine was cut off.

35. We need to manually configure the IP address, as before, click "change Adapter Settings" in "Network and sharing Center" to find the icon shown in the figure, and right-click to open its properties.

36. After clicking on it, you will see "Internet Protocol version (TCP\ IPv4)"

37. Double-click to enter the interface as shown in the figure, and select "use the following IP address"

38. Then call up the "command prompt" and enter ipconfig to see if the address is valid

39. Next, check the IP address of the host (local host). Also open "change Adapter Settings" in "Network and sharing Center" to find the icon shown in the figure. Click on the properties to find "Internet protocol version (TCP\ IPv4)" to set the IP address.

40. Then go back to the host interface, call up the "Command prompt" and enter the "ping 192.168.100.100" virtual machine IP address, and you will see the figure:

41. At this time, the firewall is doing something wrong. Just turn off the firewall of the virtual machine.

42. Then go to "ping 192.168.100.100" and you will see "reply from 192.168.100.100"

At this time, the interconnection with the host is realized.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.