Shulou(Shulou.com)06/03 Report--

1 download win server 2012 R2

2 because the hard disk of the R730 server is 3.6T, and the maximum running 2T hard disk when boot starts, press ctrl+r to enter the hard disk operating area, press F2 to divide the hard disk, select raid5, and then all three disks are selected, in the lower left vd size, it will appear 3.66T by default, this does not need to be changed, save and exit.

3Press F2 to enter boot manager after reboot, and select UEFI startup mode instead of boot startup mode.

4 after saving and restarting, press f11 to enter, select the second UEFI, and then select USB to start. Before this step, you need to make a U-disk boot disk with ultraiso, and search for the image of the U-disk boot disk that supports raid drive on the Internet, the size is 304m. Then use ultraiso to make U disk boot disk.

5 after entering PE, search the partition first, and select GUID instead of MBR when you finish searching and saving. If you choose MBR, you will be prompted when installing the system that windows can only be installed in the GPT partition.

6 after searching the partition, carry on the partition quickly, otherwise when installing the system, it may prompt the system that the partition cannot be found and the partition cannot be located.

7 before proceeding to the next step, you need to use ultraiso to burn the win server 2012r2 system to the U disk as the boot disk.

8 when starting up, select f11 to enter, select uefi, and then select usb to start, and then enter the system installation program to start the installation of the system.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.