Shulou(Shulou.com)05/31 Report--

Hello everyone, Lin Fei to answer the above questions, the correct use of the wall stove and steps, how to operate the wall stove, many people do not know, now let's take a look!

Since the beginning of winter this year, the natural gas situation in Wuhan has been tense, restricting natural gas supply twice. As the largest consumer of civil natural gas, the wall-mounted furnace was pushed to the forefront of the media and became the culprit of natural gas shortage overnight. In the face of responsibility from all sides, the government and natural gas companies have called on Wuhan citizens not to use wall-mounted stoves for heating. However, after several years of development in Wuhan, its good heating effect has been supported by the general public. Therefore, the widespread use of wall-mounted furnaces is the trend of the times. In the face of natural gas shortage, we can only start with the use of wall-mounted furnaces to reduce the energy consumption of wall-mounted furnaces and face the shortage of natural gas together.

The use method of reducing household energy consumption by wall-mounted furnace

"heating with a wall-mounted stove is too tiring. It took only half a month and cost more than 500 yuan." Yesterday, Ms. Wang, who lives in Nanhu Garden in Wuhan, complained that natural gas was scarce and expensive. Ms. Wang would like to ask if there is a better way to reduce energy consumption. First, it can reduce expenditure, and second, it can ease the shortage of natural gas.

According to the analysis of IT encyclopedia senior experts, the large amount of gas used for wall-mounted furnace heating is related to the following factors: just installed and used; the orientation of the room and the number of layers of the heating network; outdoor temperature; whether there is heating around; the methods used by users, and so on. Generally speaking, the gas consumption is the highest in the first heating season, and then decreases gradually; in the first few days of the first heating season, the gas consumption is the highest, reaching about 18 cubic meters per day, and then gradually decreasing to an average of 12 cubic meters per day. The second heating period will reduce daily gas consumption by about 30% compared with the first heating period. The daily gas consumption of the top and first floor is about 15% more than that of the middle floor. The difference in daily gas consumption between the shady side and the sunny side of the same floor is about 10%. When the district is not heated, the amount of gas used will increase by about 20%. Improper use by users will result in about 30% more gas consumption. Understanding these gas consumption sources can save gas pertinently.

Properly open windows for ventilation to increase indoor humidity.

It is recommended to open the window for 15 minutes after getting up every morning, which can not only ensure indoor air quality, but also reduce air dryness. In addition, before going to bed at night, you can put some water next to or in the container above the radiator. If the floor is relatively warm, you can put half a basin of water on the ground to improve the humidity in the room. In order to ensure indoor air quality, open the windows of the room facing south of 1xpg 3 before going to work every day. Generally, do not open the windows facing north for a long time to ventilate and heat the heating network. This not only ensures air quality, but also reduces heat loss. The indoor temperature should not be too high, because if you want to raise the ambient temperature by 1, you need to increase energy consumption by 6%. Too high indoor temperature will cause dry skin. It is best to keep the indoor temperature at 16-18, which is more energy-saving. Wearing a sweater will not feel cold, the human body will be very comfortable.

Flexible temperature control can reduce gas energy consumption.

So how to save breath and be comfortable in the heating process? Many office workers are used to turning off the boiler when there is no one at home, and then set the boiler to a high gear for rapid heating after work. This practice is very unscientific. Because this is tantamount to starting from scratch, because the room temperature is quite different from the set temperature of the boiler, the boiler needs to run for a period of time, which will waste more gas. Therefore, before going to work and going out, just set the heating temperature adjustment knob of the boiler to "0". At this time, the boiler is in the anti-freezing state, the water temperature in the radiator is kept between 35-40, and the overall indoor space temperature is about 8-14. After working, adjust the boiler heating device to the desired temperature. This method costs the least, even less than 400 yuan per month for a 100-square-meter house. In the case of a large number of rooms and a relatively small population, the radiator valves in rooms that are not occupied or used infrequently can be reduced, which is equivalent to reducing the heating area and saving

Knowing how to use a wall-mounted stove can not only save resources, but also solve the problem of natural gas shortage in Wuhan. It's killing two birds with one stone. In addition to using skills, the brand and energy efficiency of the wall-mounted stove are also important. The energy-saving effect of Weineng, Bosch, Fargo and other European first-tier brands is very ideal, especially for the use of condensing wall-mounted furnace. The thermal efficiency of Fargo platinum series wall-mounted furnace can be as high as 108.7%. Even if the cost is slightly higher, it will not take long to recoup the cost in terms of energy conservation.

General knowledge of energy saving of wall-mounted furnace

First, use heating

1. If your room area is larger, you can turn off or turn off the radiator valve in the non-residential room, which is equivalent to reducing the heating area, not only saving energy, but also raising the heating temperature more quickly in the normal use space.

two。 For office workers, when there is no one at home during the day, they can set the heating temperature adjustment knob of the boiler to "0". The boiler is in an anti-freezing state, and the water temperature in the heater is kept between 35 and 40 degrees. The overall space temperature in the room is about 9 to 14 degrees (it has an impact on the orientation, area, thermal insulation performance of the room and whether the neighbors live or not). After work, you can set the heating gear of the boiler to the temperature you need.

3. If you are on a long business trip or haven't lived yet, it is recommended that you ask a professional to drain the water from the boiler and radiator (make sure the water in the buried pipe is also emptied to make sure it is foolproof), which can save a lot of energy consumption.

Second, the use of domestic hot water

1. The temperature of domestic hot water is set below the third gear, so that the circulating water temperature inside the boiler generally does not exceed 60 degrees, which can reduce the scaling inside the boiler heat exchanger.

two。 In the process of taking a bath, try to reduce the number of hot water switches, because every time the hot water faucet is turned on and off, there is a six-second delay in starting the wall stove. During this period of time, there will certainly be a period of cold water flowing out, which will not only waste water, but also cause the risk of scald because of the large temperature difference between hot and cold.

Through the introduction of the use of the side Xiao wall-mounted stove, I believe everyone will have some experience in using the wall-mounted stove and save a little every day. If it takes a lifetime to calculate, it will be a very huge number. Even if one day, the shortage of natural gas comes to Wuhan again, we can face it calmly.

At the end of this article, I hope it will be helpful to you.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.