Shulou(Shulou.com)06/03 Report--

This article mainly shows you "how to use GHOST and avoid A:\GHOSTERR.TXT", the content is simple and easy to understand, clear organization, I hope to help you solve doubts, let Xiaobian lead you to study and learn "how to use GHOST and avoid A:\GHOSTERR.TXT" this article bar.

I searched the Internet about Lenovo computers can not do Ghost problem, found that many friends have encountered the same situation with me, in fact, not all Lenovo computers can not use Ghost, but some can not do, many friends said delete Lenovo hidden partition, format, repartition, clear CMOS and so on... You can definitely do Ghost by using these methods. In fact, none of these methods work.

Analysis: the main reason is the use of SATA optical drive and hard disk reasons, ghost can not distinguish between hard disk and optical drive, and the use of the latest 9XX and other chips motherboard

Influencing factors:

1, CD boot to have SATA support function, support SATA drive boot, you can use the application software on the CD (partition software, etc.); or use the fully installed XP system disk partition.

2, according to PQ, sFDISK and other partition tools will affect the normal operation of ghost, it is recommended to use DM partition, IBM recommended partition software for Windows ME FDISK is the best partition tool.

Lenovo and DELL hide a partition (about 2G, for one-click backup and recovery) in a special way, and software such as disk manager cannot display this hidden partition, but the total capacity of the hard disk is about 2G.

Preparations:

1. Prepare Windows PE download disc

2. Prepare GHOST11, GHOST32 (ghost version used under graphical interface), Ghost Explorer

Delete HPA Hidden Partitions

Solution:

1. Turn on and press DEL (AwardBIOS CMOS)--Integrate Peripherals--VIA OnChip IDE Device--IDE HDD Block Mode to change (Enabled to Disabled)--F10--Y--Enter and then GHOST is OK. This method applies to most Lenovo computers (unless you have changed the motherboard from the original one, but it is basically the same)

Use PE to run GHOST32 for clone recovery

3, first drive boot, divide the area, transfer a system to c disk (sys command), copy the ghost and files to other partitions, bios inside the shield drive, and then the hard drive boot can ghost.

4. Use ghost plus-NOIDE parameter

5. Remove Lenovo's hard disk and attach it to another machine that can use Ghost. Let Lenovo's hard disk be a slave disk and then do Ghost. Of course, when you want to recover, you have to attach it to another computer for recovery...

6, using Ghost Explorer, that is, GHOST browser, you can compile GHO files. First format the C drive into PE, you want FAT32 FAT32, NTFS NTFS. Ghost Explorer opens the GHO file you extracted, extracts all the contents of this file to drive C, and restarts. This method essentially does not use ghost, avoid A:\GHOSTERR.TXT and can not use GHOST, there is no time to test, but it should be feasible.

The above is "cannot use GHOST and avoid appearing A:\GHOSTERR.TXT how to do" all the contents of this article, thank you for reading! I believe that everyone has a certain understanding, hope to share the content to help everyone, if you still want to learn more knowledge, welcome to pay attention to the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.