Shulou(Shulou.com)06/01 Report--

This article mainly introduces "the steps of loading raid driver on linux system". In daily operation, I believe that many people have doubts about the steps of loading raid driver on linux system. The editor consulted all kinds of materials and sorted out simple and easy-to-use operation methods. I hope it will be helpful to answer the doubts of "linux system loading raid driver steps". Next, please follow the editor to study!

Linux system is often used by our company, sometimes let do raid driver, but when doing the system can not find raid, then we have to load raid driver to do the system.

1. Start the CD to enter the installation interface, enter linux dd after boot: and press enter.

2. If the driver is incorrect, then prompt: Failed to mount drive disk

If the driver is correct, you will be prompted to load usb-storage. At this time, the driver is fully loaded.

3. Ask if you want to load the driver and select yes

4. Select sda devices usb devices are identified as scsi devices

5. Whether to load / dev/sda device and select ok

6. Enter the following figure and click ok

7. Select the driver you need and press ok

8. Whether to load additional drivers and choose no, so that the system can be installed normally

Note:

The flash drive must be mounted, or it will all be wasted.

At this point, on the "linux system loading raid driver steps" on the end of the study, I hope to be able to solve your doubts. The collocation of theory and practice can better help you learn, go and try it! If you want to continue to learn more related knowledge, please continue to follow the website, the editor will continue to work hard to bring you more practical articles!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.