Shulou(Shulou.com)06/03 Report--

How to judge that the solid state hard drive is broken? I believe that many inexperienced people are at a loss about this, so this article summarizes the causes and solutions of the problem. Through this article, I hope you can solve this problem.

The method to judge the solid state hard drive is broken: 1, the BIOS can not accurately identify the SSD, and the capacity and other parameters are incorrect; 2, the disk manager in the system can not recognize the SSD;3, can not initialize the SSD, partition, format operation; 4, can not read and write the SSD.

The way to determine that the solid state hard drive is broken:

1) BIOS cannot accurately identify SSD, and the parameters such as capacity are incorrect.

2) the disk manager in the system does not recognize SSD, and the capacity and hard disk mode parameters are incorrect.

3) the SSD cannot be initialized, partitioned, or formatted. If any operation cannot be carried out, it proves that the SSD is damaged (it may be bad).

4) SSD cannot be read or written.

Extended data:

Signs of solid-state drive failure:

1: bad block: mechanical hard disk "bad path". It is not surprising that there are "bad blocks" in solid state drives. This type of problem is usually characterized by an exercise (it takes a very long time for the system to try to read or save a file, and eventually an error message such as "abandon operation" occurs.

2: the file cannot be read or fetched: when the system detects that data will be written to a bad block, it will directly reject writing; for data that has been written to a bad block, the operating system will refuse to read.

3: the file system needs to be repaired: the computer has a blue screen with a large Recovery character on it.

4: frequent panic crashes at startup: if the disk is about to be "sacrificed", the system will often crash during startup.

5: the disk becomes read-only: if you don't change anything to manually set the disk to read-only mode, but SSD suddenly becomes read-only mode, then SSD is probably dead. However, the data can still be read out, which is a blessing in misfortune.

After reading the above, how do you know how to judge that the solid state drive is broken? Is there a way to do it? If you want to learn more skills or want to know more about it, you are welcome to follow the industry information channel, thank you for reading!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.