Shulou(Shulou.com)06/02 Report--

The installation requirements for deploying DHCP are as follows:

1. The server should be a static ip address (servers usually use static ip)

2. In the domain environment, you need to use the active Directory server to authorize DHCP services.

3. Establish a scope (scope is to define the scope of the ip address pool)

Before installing the DHCP service, you need to plan the information:

1. Determine the range of ip addresses that the DHCP server will distribute to the client.

2. Determine the correct subnet mask, gateway, DNS pointing and so on for the client.

3. Make sure that the DHCP server should not distribute all ip addresses to the client, and that some fixed ip should be reserved for use by the print server, etc.

Meet the above conditions for installation

Open the server manager and select the DHCP server

Next step to install

After installation

Then find DHCP in the tool and open it

Right-click ipv4 after opening it, and click New scope

The IP address can be obtained after installation, and the client verifies the result.

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.