Shulou(Shulou.com)06/02 Report--

This article mainly introduces how to set up beacon, has a certain reference value, interested friends can refer to, I hope you can learn a lot after reading this article, the following let the editor take you to understand it.

The value of beacon frame size needs to take into account the wireless environment, equipment performance and regional signal strength or interference and other factors; generally default 100, increase and reduce correlation, increase network capacity, reduce anti-interference ability; on the contrary, increase correlation, reduce capacity, increase anti-interference ability.

The operating environment of this tutorial: windows7 system, Dell G3 computer.

The value of beacon frame size needs to take into account the wireless environment, equipment performance and regional signal strength or interference and other factors; generally default 100, increase and reduce correlation, increase network capacity, reduce anti-interference ability; on the contrary, increase correlation, reduce capacity, increase anti-interference ability.

It should be noted that when the utilization rate of the equipment is too high, the added value can be selected as far as possible, 160 can be selected when the signal strength is not good, and 200 can be selected when the signal is good. In addition, the selection value of outdoor environment is lower and that of indoor environment is higher.

Beacon slot does not mean signal strength, this beacon slot means signal strength, for example, my router is 150m through the wall, but the route is placed in the living room, sometimes the signal is not very good when using iphone or iPad in the bedroom, this is because the value of beacon slot is a little low, if your router is very close to you, it is recommended that 100 is based.

If your route is in the living room, but you want to be in the bedroom, it is recommended that you set the value to about 400, the higher the signal, the better, but after all, everything has a limit, so it is not recommended to set it to very high!

Extended data:

Beacon, beacon. Communication terminology. In general, wireless network cards do the so-called passive scanning (passive scanning), also known as background scanning.

Open the wireless network management program under OS or the built-in management program of XP, and the wireless network card is actually scanning from the ISM channel all the time.

Wait for the Beacon to scan to the wireless base station, such as AP, before it shows what SSID is in this area. On the other hand, the frequent Beacon transmission of the base station frame will occupy the wireless bandwidth resources.

The increase of the beacon interval (Beacon Interval) helps to exert the efficiency of the wireless network and saves power on the client end, while the lower beacon interval can speed up the wireless client connection speed.

In the roaming environment and some wireless client (wireless client) online changes are relatively large (such as public hot spots), the client (Client) belongs to the mobile state, needs to roam quickly, and the beacon should be lowered appropriately.

The beacon unit is usually in milliseconds (millsecond) (1x1000 seconds), with a default value of 100.

Thank you for reading this article carefully. I hope the article "how to set up beacon" shared by the editor will be helpful to everyone. At the same time, I also hope you will support us and pay attention to the industry information channel. More related knowledge is waiting for you to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.