Shulou(Shulou.com)06/01 Report--

This article focuses on "how to improve the boot speed of the XP system", interested friends may wish to take a look. The method introduced in this paper is simple, fast and practical. Now let the editor take you to learn "how to improve the boot speed of the XP system"!

1. The first is the hardware configuration. This point is often overlooked. In fact, only when the hardware is configured can it be started quickly. The first is the hard disk, which must be set on the first master disk (master). Some of the early hard disk jumpers default to the secondary disk (slave), which can be changed back according to the motherboard instructions. In addition, the transmission mode should be changed to "DMA if available", otherwise not only the startup is slow, but also the overall performance is greatly reduced. Remember to use an 80-pin cable. The hard drive connector should use the black one at the end of the cable.

two。 For users using SATA hard drives, the IDE channel on the motherboard is empty, and the IDE channel is detected every time they enter the windows, which slows down the speed. Just close the idle IDE channel in device Manager. In addition, it is useless to turn off idle channels in bios alone.

3. Light zone. Most of the jumpers in the light area are in the sub-disk, and the new ones are also … So check to see if the jumper cap is on the subplate. According to the personal test, the light area jumper cap in the case of secondary plate, the scroll bar should run more than 3 laps.

4. Microsoft's accelerator. Microsoft has launched a special system startup optimization program. You might as well try it.

5. Nic IP settings. This has been said many times. If the network card does not use static IP, every boot will automatically search and configure the network card, especially the friends installed with ADSL, is even more exaggerated. Right-click "Network neighbor"-Select Properties, enter the window, right-click "Local connection"-Select Properties, double-click here "Internet Protocol (TCP/IP)", select "use the following IP address" and enter an IP address (for example: 192.168.0.111111 this number can be changed by yourself, between 1q255). ), the subnet mask defaults, and the default gateway is 192.168.0.1.

6. Click start-> run-- > enter regedit in

HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Control\ Session Manager\ Memory

The EnablePrefetcher value under Management\ PrefetchParameters is changed to 1. The more popular method on the network, the price is the black screen time is correspondingly longer, but the scroll bar looks like only one lap, the psychology is a little bit better.

7. Start, run, type msconfig, start, and cancel programs other than antivirus software and input method (ctfmon.exe, I don't know if it's right or not). This method is also very popular and has some effect.

8. Defragment the disk. Clean up temporary files. There's nothing to say about this.

9. Motherboard driver. Be sure to install this, especially the intel motherboard users, the effect is very obvious. The chipset acceleration software "Intel Application Accelerator" not only starts quickly, but also improves the overall performance.

10.Bios setting, which refers to others, has a certain effect:

"Quick Power On Self Test": activate to speed up the self-test speed of the motherboard;

"Show Bootuo Logo": disabled, startup Logo is not displayed

"Boot Up Floppy Seek": disable, do not detect floppy drive, save startup time

"Boot Sequence": boot sequence, set to "C:".

11. Antivirus software. Generally speaking, among the domestic software, Jiangmin is the fastest, Jinshan later, rising last. Anti-virus ability personally feel that Jiangmin is general, while rising is relatively strong. It's up to you.

twelve。 File system. The startup of NTFS format will be faster, and systems with more than 2k need ntsf format to fully perform. However, this point can be ignored, there is no need to turn around to avoid trouble.

At this point, I believe you have a deeper understanding of "how to improve the boot speed of the XP system". You might as well do it in practice. Here is the website, more related content can enter the relevant channels to inquire, follow us, continue to learn!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.