Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

Access the router through the wan port of the secondary router

2025-02-27 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >

Share

Shulou(Shulou.com)06/02 Report--

For older routers, the tp Fast Router. To fast FR48 to do experiments, my computer connected to the cat, because we apply for broadband is 200m, mainly for office use, in order to prevent the use of traffic in public areas affect the normal office. I added an old enterprise routing quick FR48 in front of the AC manager. (don't ask me why I added this broken router. I don't know about the company. in short, it is cost-saving to ensure the normal use of the office. Not to mention this junk FR48, it has been turned on all the time and it will not crash. There are at most 40 phone tablets in the back.) the topology diagram is as follows

Figure 1

As a small network manager, my computer certainly can not be connected to the back of the FR48, my computer wirelessly connected to the AP is often unable to access the router's web management page (after all, cow) I can not power off from time to time. But what if I still have to manage FR48?

When it comes to today's topic. Connect through the WAN port of FR48. Figure 1. My computer and the WAN port of FR48 are under the same light cat.

Setup step

The first step is to restart the router FR48, and my computer is connected to the FR48 through the AP signal.

Enter the management page of the router to access the Internet by choosing a fixed IP (if it is a dynamic IP, that is, each visit, you need to determine the IP obtained by FR48 at that time. It is recommended to set it to fixed first. DNS is provided by the cat. It is OK without setting it.

Look at the security settings on the left, remote web management under the secondary directory

The second step is to look at the picture.

Step three, it's time to witness miracles.

My computer is local

FR48 I just set it to 192.168.10.10

The ip address of the light cat is 192.168.10.1.

The IP address of my computer is 192.168.10.50

I am now using my computer to connect to the FR48. Note that the input address is 192.168.10.10 FR48 8080.

The port number is the same as the one just set.

The miracle witness is over! Please forward and share with a link. Thank you

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Servers

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report