Network Security Internet Technology Development Database Servers Mobile Phone Android Software Apple Software Computer Software News IT Information

In addition to Weibo, there is also WeChat

Please pay attention

WeChat public account

Shulou

The method of setting IP address by linux

2025-02-25 Update From: SLTechnology News&Howtos shulou NAV: SLTechnology News&Howtos > Servers >

Share

Shulou(Shulou.com)06/03 Report--

Configure the file ifcfg-eth0 file path required by the network: / eth/sysconfig/network-scripts/ifcfg-eth0

Ifcfg-eth0 file configuration resolution:

TYPE=Ethernet DEVICE=eth0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.16.12 NETMASK=255.255.255.0 GATEWAY=192.168.16.1 BROADCAST=192.168.16.255HWADDR=00:0C:29:13:5D:74 PEERDNS=yes DNS1=10.0.1.41 USERCTL=no NM_CONTROLLED=no IPV6INIT=yes IPV6ADDR=FD55:fe80::28c2:e745:835f:c8d0/64

Attached. Configuration parameter description

Note: these parameter values are not case-sensitive, do not distinguish between single and double quotation marks, and can even be used without quotation marks.

TYPE: profile interface type. There are a variety of network configuration files in the / etc/sysconfig/network-scripts/ directory, including Ethernet, IPsec and other types, and the network interface type is Ethernet.

DEVICE: network interface name

BOOTPROTO: system Boot address Protocol

None: do not use startup address protocol

Bootp:BOOTP protocol

Dhcp:DHCP dynamic address Protocol

Static: static address protocol

ONBOOT: whether the system is activated at startup

Yes: activate this network interface when the system starts up

No: this network interface is not activated when the system starts up

IPADDR:IP address

NETMASK: subnet mask

GATEWAY: gateway addr

BROADCAST: broadcast addr

Configuration takes effect

In order to make the network configuration permanent, the network interface configuration file under / etc/sysconfig/network-scripts/ is modified in the second part. However, these documents cannot take effect immediately after they have been modified. There are two ways to make the network configuration of the modified file take effect:

1) execute the service network restart command to restart the network service (recommended)

# service network restart

2) restart the computer

# reboot

These are the details of how linux sets up ip. For more information, please follow other related articles!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.

Views: 0

*The comments in the above article only represent the author's personal views and do not represent the views and positions of this website. If you have more insights, please feel free to contribute and share.

Share To

Servers

Wechat

© 2024 shulou.com SLNews company. All rights reserved.

12
Report