Shulou(Shulou.com)06/03 Report--

Editor to share with you how to use static ip to set up a router, I believe most people do not know much about it, so share this article for your reference, I hope you can learn a lot after reading this article, let's learn about it!

The wireless router is set in the static ip network, and the Internet parameters are mainly inernet connection type. Select the static IP and fill in the parameters; the wireless router network segment needs to be modified to eliminate the gateway address conflict. Because the gateway address of most wireless routers is 192.168.1.1, this conflicts with the gateway of static ip.

After plugging into the wireless router, first connect to the computer separately, set the parameter configuration, then modify the network segment, and then connect the broadband network cable. These parameters are mainly set in different network segments as static IP addresses.

Establish steps:

1. After the router is plugged in, the computer uses a network cable to connect to any LAN port of the wireless router.

Note that the two are connected separately and do not connect the broadband network cable first. Enter the 192.168.1.1 computer browser to the address bar. Enter the router management interface and enter the router login account.

2. Change the router IP address in the network settings on the left to 192.168.0.1.

Then press finish to restart the wireless router, change the router address to 192.168.0.1 to avoid conflicts with the broadband gateway, and then log in to the wireless router address 192.168.0.1.

3. After the wireless router is restarted, log in with the address 192.168.0.1.

Enter the wireless router interface and click on the Internet on the left and static IP on the right. Fill in the IP address. Parameters such as subnet mask. For example: 192.168.1.9, subnet mask: 255.255.255.0, default gateway 192.168.1.1, preferred DNS server 211.2.4, no backup DNS server.

4. Select the wireless setting on the left.

Set the WIFI name with the wireless WIFI password. When finished, plug the WAN port of the wireless router into the broadband network cable. Can surf the Internet normally.

The above is all the contents of the article "how to use static ip to set up a router". Thank you for reading! I believe we all have a certain understanding, hope to share the content to help you, if you want to learn more knowledge, welcome to follow the industry information channel!

Welcome to subscribe "Shulou Technology Information " to get latest news, interesting things and hot topics in the IT industry, and controls the hottest and latest Internet news, technology news and IT industry trends.